Cross-media color reproduction using the frequency-based spatial gamut mapping algorithm based on human color vision

Author(s):  
Guangyuan Wu ◽  
Shijun Niu ◽  
Xiaozhou Li ◽  
Guichun Hu
2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Guangyuan Wu ◽  
Zhen Liu ◽  
Shengwei Yang ◽  
Ming Zhu ◽  
Pan Liu

A weighted LabPQR interim connection space, based on human color vision, is proposed for retaining more visual color information. A new weight function proposed in our paper is connected with color-matching function and then further weighted the PQR dimensions of LabPQR compared with the other two weight functions and nonweight function. The results indicated that weighting obviously improved the colorimetric representing accuracy and robustness compared with nonweighting, and the new weight function outperformed the other two weight functions. The weighted LabPQR of the new weight function is most suitable for spectral color reproduction.


2012 ◽  
Vol 29 (6) ◽  
pp. 1027 ◽  
Author(s):  
Xiandou Zhang ◽  
Qiang Wang ◽  
Jincheng Li ◽  
Ping Yang ◽  
Jieyue Yu

2001 ◽  
Vol 18 (1) ◽  
pp. 127-135 ◽  
Author(s):  
MARCEL J. SANKERALLI ◽  
KATHY T. MULLEN

It is widely accepted that human color vision is based on two types of cone-opponent mechanism, one differencing L and M cone types (loosely termed “red–green”), and the other differencing S with the L and M cones (loosely termed “blue–yellow”). The traditional view of the early processing of human color vision suggests that each of these cone-opponent mechanisms respond in a bipolar fashion to signal two opponent colors (red vs. green, blue vs. yellow). An alternative possibility is that each cone-opponent response, as well as the luminance response, is rectified, so producing separable signals for each pole (red, green, blue, yellow, light, and dark). In this study, we use psychophysical noise masking to determine whether the rectified model applies to detection by the postreceptoral mechanisms. We measured the contrast-detection thresholds of six test stimuli (red, green, blue, yellow, light, and dark), corresponding to the two poles of each of the three postreceptoral mechanisms. For each test, we determined whether noise presented to the cross pole had the same masking effect as noise presented to the same pole (e.g. comparing masking of luminance increments by luminance decrement noise (cross pole) and luminance increment noise (same pole)). To avoid stimulus cancellation, the test and mask were presented asynchronously in a “sandwich” arrangement (mask-test-mask). For the six test stimuli, we observed that noise masks presented to the cross pole did not raise the detection thresholds of the test, whereas noise presented to the same pole produced a substantial masking. This result suggests that each color signal (red, green, blue, and yellow) and luminance signal (light and dark) is subserved by a separable mechanism. We suggest that the cone-opponent and luminance mechanisms have similar physiological bases, since a functional separation of the processing of cone increments and cone decrements could underlie both the separation of the luminance system into ON and OFF pathways as well as the splitting of the cone-opponent mechanisms into separable color poles.


2013 ◽  
Vol 28 (3) ◽  
pp. 365-372
Author(s):  
黄新民 HUANG Xing-ming ◽  
申静 SHEN Jing ◽  
任亚杰 REN Ya-jie ◽  
姚军财 YAO Jun-cai

2019 ◽  
Vol 73 (5) ◽  
pp. 520-528 ◽  
Author(s):  
Kevin J. Major ◽  
Thomas C. Hutchens ◽  
Christopher R. Wilson ◽  
Menelaos K. Poutous ◽  
Ishwar D. Aggarwal ◽  
...  

This paper describes the application of a human color vision approach to infrared (IR) chemical sensing for the discrimination between multiple explosive materials deposited on aluminum substrates. This methodology classifies chemicals using the unique response of the chemical vibrational absorption bands to three broadband overlapping IR optical filters. For this effort, Fourier transform infrared (FT-IR) spectroscopy is first used to computationally examine the ability of the human color vision sensing approach to discriminate between three similar explosive materials, 1,3,5,-Trinitro-1,3,5-triazinane (RDX), 2,2-Bis[(nitrooxy)methyl]propane-1,3,-diyldinitrate (PETN), and 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane (HMX). A description of a laboratory breadboard optical sensor designed for this approach is then provided, along with the discrimination results collected for these samples using this sensor. The results of these studies demonstrate that the human color vision approach is capable of high-confidence discrimination of the examined explosive materials.


1998 ◽  
Vol 63 (5) ◽  
pp. 1257-1262 ◽  
Author(s):  
Bernd Wissinger ◽  
Lindsay T. Sharpe

Sign in / Sign up

Export Citation Format

Share Document