New approach for determination of time delay for reconstruction of phase space from time series of satellite observations

2003 ◽  
Author(s):  
Lisheng Xu ◽  
Jilie Ding ◽  
Gangyi Chen
2004 ◽  
Author(s):  
Lisheng Xu ◽  
Yongzhong Wang ◽  
Jilie Ding ◽  
Andrew Y. S. Cheng ◽  
Xiuwan Chen ◽  
...  

Entropy ◽  
2021 ◽  
Vol 23 (2) ◽  
pp. 221
Author(s):  
Mariano Matilla-García ◽  
Isidro Morales ◽  
Jose Miguel Rodríguez ◽  
Manuel Ruiz Marín

The modeling and prediction of chaotic time series require proper reconstruction of the state space from the available data in order to successfully estimate invariant properties of the embedded attractor. Thus, one must choose appropriate time delay τ∗ and embedding dimension p for phase space reconstruction. The value of τ∗ can be estimated from the Mutual Information, but this method is rather cumbersome computationally. Additionally, some researchers have recommended that τ∗ should be chosen to be dependent on the embedding dimension p by means of an appropriate value for the time delay τw=(p−1)τ∗, which is the optimal time delay for independence of the time series. The C-C method, based on Correlation Integral, is a method simpler than Mutual Information and has been proposed to select optimally τw and τ∗. In this paper, we suggest a simple method for estimating τ∗ and τw based on symbolic analysis and symbolic entropy. As in the C-C method, τ∗ is estimated as the first local optimal time delay and τw as the time delay for independence of the time series. The method is applied to several chaotic time series that are the base of comparison for several techniques. The numerical simulations for these systems verify that the proposed symbolic-based method is useful for practitioners and, according to the studied models, has a better performance than the C-C method for the choice of the time delay and embedding dimension. In addition, the method is applied to EEG data in order to study and compare some dynamic characteristics of brain activity under epileptic episodes


2021 ◽  
Vol 9 ◽  
Author(s):  
Aixia Feng ◽  
Feng Gao ◽  
Qiguang Wang ◽  
Aiqing Feng ◽  
Qiang Zhang ◽  
...  

Snow cover over the Tibetan Plateau plays a vital role in the regional and global climate system because it affects not only the climate but also the hydrological cycle and ecosystem. However, high-quality snow data are hindered due to the sparsity of observation networks and complex terrain in the region. In this study, a nonlinear time series analysis method called phase space reconstruction was used to obtain the Tibetan Plateau snow depth by combining the FY-3C satellite data and in situ data for the period 2014–2017. This method features making a time delay reconstruction of a phase space to view the dynamics. Both of the grids and their nearby in situ snow depth time series were reconstructed with two appropriate parameters called time delay and embedding dimension. The values of the snow depth for grids were averaged over the in situ observations and retrieval of the satellite if their two parameters were the same. That implies that the two trajectories of the time series had the same evolution trend. Otherwise, the snow depth values for grids were averaged over the in situ observation. If there were no in situ sites within the grids, the retrieval of the satellite remained. The results show that the integrated Tibetan Plateau snow depth (ITPSD) had an average bias of –1.35 cm and 1.14 cm, standard deviation of the bias of 3.96 cm and 5.67 cm, and root mean square error of 4.18 cm and 5.79 cm compared with the in situ data and FY-3C satellite data, respectively. ITPSD expressed the issue that snow depth is usually overestimated in mountain regions by satellites. This is due to the introduction of more station observations using a dynamical statistical method to correct the biases in the satellite data.


2004 ◽  
Author(s):  
Lisheng Xu ◽  
Yongzhong Wang ◽  
Jilie Ding ◽  
Andrew Y. S. Cheng ◽  
Xiuwan Chen ◽  
...  

2004 ◽  
Author(s):  
Yongzhong Wang ◽  
Lisheng Xu ◽  
Jilie Ding ◽  
Andrew Y. S. Cheng ◽  
Xiuwan Chen ◽  
...  

Author(s):  
John Zolock ◽  
Robert Greif

The main goal of this research is to develop and demonstrate a general, efficient, mathematically and theoretically based methodology to model nonlinear forced vibrating mechanical systems from time series measurements. A system identification modeling methodology for forced dynamical systems is presented based on dynamic system theory and nonlinear time series analysis that employs phase space reconstruction (delay vector embedding) for modeling of dynamical systems from time series data using time-delay neural networks (TDNN). The first part of this work details the modeling methodology including background on dynamic systems, phase space reconstruction, and neural networks. In the second part of this work the methodology is evaluated based on its ability to model selected analytical lumped parameter forced vibrating dynamic systems including an example of a linear system predicting lumped mass displacement using a displacement forcing. function The work discusses the application to nonlinear systems, multi degree-of-freedom systems, and multi-input systems. The methodology is further evaluated on its ability to model an analytical passenger rail vehicle predicting vertical wheel/rail force using vertical rail profile as input. Studying the neural modeling methodology using an analytical systems shows the clearest observations from results which provide prospective users of this tool an understanding of the expectations and limitations of the modeling methodology.


2008 ◽  
Vol 131 (1) ◽  
Author(s):  
John Zolock ◽  
Robert Greif

The main goal of this research was to develop and present a general, efficient, mathematical, and theoretical based methodology to model nonlinear forced-vibrating mechanical systems from time series measurements. A system identification modeling methodology for forced dynamical systems is presented based on a dynamic system theory and a nonlinear time series analysis that employ phase space reconstruction (delay vector embedding) in modeling dynamical systems from time series data using time-delay neural networks. The first part of this work details the modeling methodology, including background on dynamic systems, phase space reconstruction, and neural networks. In the second part of this work, the methodology is evaluated based on its ability to model selected analytical lumped-parameter forced-vibrating dynamic systems, including an example of a linear system predicting lumped mass displacement subjected to a displacement forcing function. The work discusses the application to nonlinear systems, multiple degree of freedom systems, and multiple input systems. The methodology is further evaluated on its ability to model an analytical passenger rail car predicting vertical wheel∕rail force using a measured vertical rail profile as the input function. Studying the neural modeling methodology using analytical systems shows the clearest observations from results, providing prospective users of this tool an understanding of the expectations and limitations of the modeling methodology.


2014 ◽  
Vol 59 (10) ◽  
pp. 1434-1444 ◽  
Author(s):  
I. V. Sysoev ◽  
M. D. Prokhorov ◽  
V. I. Ponomarenko ◽  
B. P. Bezruchko

Sign in / Sign up

Export Citation Format

Share Document