A two‐stage binaural speech enhancement approach for hearing aids with preserving binaural benefits in noisy environments

2008 ◽  
Vol 123 (5) ◽  
pp. 3012-3012 ◽  
Author(s):  
Junfeng Li ◽  
Shuichi Sakamoto ◽  
Satoshi Hongo ◽  
Masato Akagi ◽  
Yôiti Suzuki
2008 ◽  
Vol 123 (5) ◽  
pp. 555-557 ◽  
Author(s):  
J M Bernstein ◽  
P Z Sheehan

AbstractObjective:Bone-anchored hearing aid surgery in younger children is a two-stage procedure, with a titanium fixture being allowed to osseointegrate for several months before an abutment is fitted through a skin graft. In the first procedure, it has been usual to place a reserve or sleeper fixture approximately 5 mm from the primary fixture as a backup in case the primary fixture fails to osseointegrate. This ipsilateral sleeper fixture is expensive, is often not used, and is placed in thinner calvarial bone where it is less likely to osseointegrate successfully. The authors have implanted the sleeper fixture on the contralateral side, with the additional objective of reducing the number of procedures for bilateral bone-anchored hearing aid implantation, providing a cost-effective use for the sleeper.Methods:The authors implanted the bone-anchored hearing aid sleeper fixture in the contralateral temporal bone instead of on the ipsilateral side in seven successive paediatric cases with bilateral conductive hearing loss requiring two-stage bone-anchored hearing aids, treated at the Royal Manchester Children's Hospital, UK.Results:The seven patients ranged in age from five to 15 years, with a mean age of 10 years; in addition, a 20-year-old with learning disability was also treated. In each case, the contralateral sleeper fixture was not needed as a backup fixture, but was used in four patients (57 per cent) as the basis for a second-side bone-anchored hearing aid.Conclusions:In children with bilateral conductive hearing loss, in whom a bilateral bone-anchored hearing aid is being considered and the second side is to be operated upon at a later date, we recommend placing the sleeper fixture on the contralateral side at the time of primary first-side surgery. Our technique provides a sleeper fixture located in an optimal position, where it also offers the option of use for a second-side bone-anchored hearing aid and reduces the number of procedures needed.


2008 ◽  
Author(s):  
Krishna Nand K ◽  
T. V. Sreenivas

Electronics ◽  
2019 ◽  
Vol 8 (7) ◽  
pp. 811
Author(s):  
Yingdan Li ◽  
Fei Chen ◽  
Zhuoyi Sun ◽  
Zhaoyang Weng ◽  
Xian Tang ◽  
...  

This paper presents a new structure for hearing aids. Normally, the power consumption and user experience are contradictory. The proposed hearing aid structure mainly consists of three parts: the earpieces, the mobile computing platform, and the real-time speech-enhancement application. It can run complex algorithms without carrying out heavy calculations on the processors in the hearing aid. Thus, the binaural algorithm is utilized without being limited by complexity and power consumption to improve the user experience. Moreover, the speech-enhancement algorithm can be updated much more easily than in traditional built-in digital signal process hearing aids. A good level of user experience is achieved by combining the hearing aid and mobile computing platform with a 400-MHz transceiver; furthermore, the 400-MHz transceiver can reduce path loss around the body. The concept verification process showed that the overall usage of the central processing unit in the smartphone is around 16%, the signal-to-noise ratios show at least a 30% improvement in some environments, and the whole system delay is 8.8 ms. The presented objective and subjective results show significant improvements regarding user experience and usability brought about by the proposed structure.


Sign in / Sign up

Export Citation Format

Share Document