Architectonics and optical properties of dentin and dental enamel

Mature human dental enamel has presented investigators with several difficulties in ultramicrotomy of specimens for electron microscopy due to its high degree of mineralization. This study explores the possibility of combining ion-milling and high voltage electron microscopy as a means of circumventing the problems of ultramicrotomy.A longitudinal section of an extracted human third molar was ground to a thickness of about 30 um and polarized light micrographs were taken. The specimen was attached to a single hole grid and thinned by argon-ion bombardment at 15° incidence while rotating at 15 rpm. The beam current in each of two guns was 50 μA with an accelerating voltage of 4 kV. A 20 nm carbon coating was evaporated onto the specimen to prevent an electron charge from building up during electron microscopy.

Download Full-text

Design of objective lens for 200-kV high-resolution electron microscopes

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075361 ◽

1983 ◽

Vol 41 ◽

pp. 314-315

Author(s):

K. Tsuno ◽

T. Honda ◽

Y. Harada ◽

M. Naruse

Keyword(s):

Optical Properties ◽

Computer Technology ◽

Axial Magnetic Field ◽

Chromatic Aberration ◽

Objective Lens ◽

Resolution Electron ◽

Correction Of Astigmatism ◽

Three Stages ◽

Electron Microscopes ◽

Stage 1

Developement of computer technology provides much improvements on electron microscopy, such as simulation of images, reconstruction of images and automatic controll of microscopes (auto-focussing and auto-correction of astigmatism) and design of electron microscope lenses by using a finite element method (FEM). In this investigation, procedures for simulating the optical properties of objective lenses of HREM and the characteristics of the new lens for HREM at 200 kV are described.The process for designing the objective lens is divided into three stages. Stage 1 is the process for estimating the optical properties of the lens. Firstly, calculation by FEM is made for simulating the axial magnetic field distributions Bzc of the lens. Secondly, electron ray trajectory is numerically calculated by using Bzc. And lastly, using Bzc and ray trajectory, spherical and chromatic aberration coefficients Cs and Cc are numerically calculated. Above calculations are repeated by changing the shape of lens until! to find an optimum aberration coefficients.

Download Full-text

Optical Properties of HVEM Accelerators

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100114529 ◽

1975 ◽

Vol 33 ◽

pp. 180-181

Author(s):

A. Strojnik ◽

J.W. Scholl ◽

V. Bevc

Keyword(s):

Optical Properties ◽

Electron Accelerator ◽

Systematic Investigation ◽

Electron Source ◽

High Brightness ◽

The Past ◽

Wide Range ◽

Optical Behavior

The electron accelerator, as inserted between the electron source (injector) and the imaging column of the HVEM, is usually a strong lens and should be optimized in order to ensure high brightness over a wide range of accelerating voltages and illuminating conditions. This is especially true in the case of the STEM where the brightness directly determines the highest resolution attainable. In the past, the optical behavior of accelerators was usually determined for a particular configuration. During the development of the accelerator for the Arizona 1 MEV STEM, systematic investigation was made of the major optical properties for a variety of electrode configurations, number of stages N, accelerating voltages, 1 and 10 MEV, and a range of injection voltages ϕ0 = 1, 3, 10, 30, 100, 300 kV).

Download Full-text