The effect of ZnO nanostructures on the light output power of 375 nm near-ultraviolet light-emitting diodes (NUV-LEDs) was investigated by comparing one-dimensional (1D) nanorods (NR-ZnO) with two-dimensional (2D) nanosheets (NS-ZnO). ZnO nanostructures were grown on a planar indium tin oxide (ITO) by solution based method at low temperature of 90°C without degradation of the forward voltage. At an injection current of 100 mA, the light output efficiency of NUV-LED with NR-ZnO was enhanced by around 30% compared to the conventional NUV-LEDs without ZnO nanostructures. This improvement is due to the formation of a surface texturing, resulting in a larger escape cone and a multiple scattering for the photons in the NUV-LED, whereas the light output efficiency of NUV-LED with NS-ZnO was lower than that of the conventional NUV-LEDs due to the internal reflection and light absorption in the defective sites of NS-ZnO.