3D inversion of airborne gravity gradiometry data for the Budgell Harbour Stock, Newfoundland: A case history using a probabilistic approach

Geophysics ◽  
2019 ◽  
Vol 84 (4) ◽  
pp. B269-B284 ◽  
Author(s):  
Meixia Geng ◽  
J. Kim Welford ◽  
Colin G. Farquharson ◽  
Alexander L. Peace

We have studied the Mesozoic Budgell Harbour Stock, a gabbroic intrusion in north-central Newfoundland, Canada, using 3D inversion of airborne gravity gradiometry data based on a probabilistic inversion method. Significantly, differences were observed between the results when inverting the single [Formula: see text] component and when inverting the 5C combination. We also found that the [Formula: see text] model failed to reproduce the long-wavelength signals from other components, whereas the model recovered from five components accommodated all of the signals from all of the components. To estimate the influence of long-wavelength signals from targets other than the intrusion, such as deeper bodies or large-scale terrain variations, inversion tests are performed on a synthetic model. The inversion results for the synthetic example indicate that the joint inversion of five components is more sensitive to long-wavelength signals, which can generate spurious structures to fit all of the signals from the five components. In contrast, the [Formula: see text] model is less affected by the long-wavelength signals and thus tends to produce a stable solution, despite failing to incorporate all of the long-wavelength signals from the tensor data. We found that gravity gradiometry data could be used to delineate the intrusion within this study area, which is also consistent with the susceptibility model recovered from inversion of aeromagnetic data and with results from a previous geophysical study. Moreover, the differences between the [Formula: see text] model and the 5C model may reflect the long-wavelength signals in the gravity gradiometry data.

2016 ◽  
Vol 132 ◽  
pp. 211-228 ◽  
Author(s):  
Zhaohai Meng ◽  
Fengting Li ◽  
Dailei Zhang ◽  
Xuechun Xu ◽  
Danian Huang

2020 ◽  
Vol 223 (2) ◽  
pp. 746-764
Author(s):  
Wenbin Jiang

SUMMARY Seismic full waveform inversion (FWI) is a robust velocity model building technique for hydrocarbon exploration. However, the density reconstruction within the framework of multiparameter FWI leads to more degrees of freedom in the parametrization, and the sensitivity of the inversion change significantly from velocity to density, thereby increasing the ill-posedness of the inverse problem. Gravity gradiometry data inversion is an effective method for resolving density distribution. Combining gravity gradiometry data in FWI could alleviate the non-linearity of the inversion by contributing additional density information for the velocity model building. I develop a 3-D joint seismic waveform and gravity gradiometry inversion method for estimating the velocity and density distribution in the subsurface. The method alternatingly minimizes the waveform and gravity gradiometry misfit. The cross-gradient constraint is applied to enhance the structural similarity between the density and velocity models. The effectiveness of the joint inversion algorithm is demonstrated by a 3-D checkerboard model and 3-D SEAM model. Synthetic examples demonstrate that the joint inversion can improve the image quality in geologically complex areas. A case study from the South China Sea shows that the joint inversion improves the velocity and density solutions compared to a standalone seismic FWI. The joint inversion results are consistent with the pre-stack depth migration section and the shape of the salt body is well resolved.


Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 366
Author(s):  
Michael Jorgensen ◽  
Michael S. Zhdanov

Conventional 3D magnetic inversion methods are based on the assumption that there is no remanent magnetization, and the inversion is run for magnetic susceptibility only. This approach is well-suited to targeting mineralization; however, it ignores the situation where the direction of magnetization of the rock formations is different from the direction of the induced magnetic field. We present a novel method of recovering a spatial distribution of magnetization vector within the rock formation based on joint inversion of airborne gravity gradiometry (AGG) and total magnetic intensity (TMI) data for a shared earth model. Increasing the number of inversion parameters (the scalar components of magnetization vector) results in a higher degree of non-uniqueness of the inverse problem. This increase of non-uniqueness rate can be remedied by joint inversion based on (1) Gramian constraints or (2) joint focusing stabilizers. The Gramian constraints enforce shared earth structure through a correlation of the model gradients. The joint focusing stabilizers also enforce the structural similarity and are implemented using minimum support or minimum gradient support approaches. Both novel approaches are applied to the interpretation of the airborne data collected over the Thunderbird V-Ti-Fe deposit in Ontario, Canada. By combining the complementary AGG and TMI data, we generate jointly inverted shared earth models that provide a congruent image of the rock formations hosting the mineral deposit.


Geophysics ◽  
2013 ◽  
Vol 78 (1) ◽  
pp. B1-B11 ◽  
Author(s):  
Cericia Martinez ◽  
Yaoguo Li ◽  
Richard Krahenbuhl ◽  
Marco Antonio Braga

We present a case study of applying 3D inversion of gravity gradiometry data to iron ore exploration in Minas Gerais, Brazil. The ore bodies have a distinctly high-density contrast and produce well-defined anomalies in airborne gravity gradiometry data. We have carried out a study to apply 3D inversion to a [Formula: see text] subarea of data from a larger survey to demonstrate the utility of such data and associated inversion algorithm in characterizing the deposit. We examine multiple density contrast models obtained by first inverting [Formula: see text]; then [Formula: see text], [Formula: see text], and [Formula: see text] jointly; and finally all five independent components to understand the information content in different data components. The commonly discussed [Formula: see text] component is sufficient to produce geologically reasonable and interpretable results, while including additional components involving horizontal derivatives increases the resolution of the recovered density model and improves the ore delineation. We show that gravity gradiometry data can be used to delineate the iron ore formation within this study area.


2012 ◽  
Vol 2012 (1) ◽  
pp. 1-4
Author(s):  
Carlos Cevallos ◽  
Mark Dransfield ◽  
Jacqueline Hope ◽  
Heather Carey

Sign in / Sign up

Export Citation Format

Share Document