Turkey-Adjusted NGA-W1 Horizontal Ground Motion Prediction Models

2016 ◽  
Vol 32 (1) ◽  
pp. 75-100 ◽  
Author(s):  
Zeynep Gülerce ◽  
Bahadır Kargoığlu ◽  
Norman A. Abrahamson
Keyword(s):  
Ground Motion ◽  
Strong Ground Motion ◽  
Prediction Models ◽  
Ground Motions ◽  
Site Amplification ◽  
Motion Prediction ◽  
Ground Motion Prediction ◽  
Data Set ◽  
Horizontal Ground Motion ◽  
Strong Ground

The objective of this paper is to evaluate the differences between the Next Generation Attenuation: West-1 (NGA-W1) ground motion prediction models (GMPEs) and the Turkish strong ground motion data set and to modify the required pieces of the NGA-W1 models for applicability in Turkey. A comparison data set is compiled by including strong motions from earthquakes that occurred in Turkey and earthquake metadata of ground motions consistent with the NGA-W1 database. Random-effects regression is employed and plots of the residuals are used to evaluate the differences in magnitude, distance, and site amplification scaling. Incompatibilities between the NGA-W1 GMPEs and Turkish data set in small-to-moderate magnitude, large distance, and site effects scaling are encountered. The NGA-W1 GMPEs are modified for the misfit between the actual ground motions and the model predictions using adjustments functions. Turkey-adjusted NGA-W1 models are compatible with the regional strong ground motion characteristics and preserve the well-constrained features of the global models.

Watts Bar Nuclear Power Plant Strong-Motion Records of the 12 December 2018 M 4.4 Decatur, Tennessee, Earthquake

2020 ◽  
Vol 91 (3) ◽  
pp. 1579-1592 ◽  
Author(s):  
Vladimir Graizer ◽  
Dogan Seber ◽  
Scott Stovall
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Ground Motion ◽  
Nuclear Power ◽  
Prediction Models ◽  
Ground Motions ◽  
Strong Motion ◽  
Motion Prediction ◽  
Ground Motion Prediction ◽  
Digital Recordings

Abstract The moment magnitude M 4.4 on 12 December 2018 Decatur, Tennessee, earthquake occurred in the eastern Tennessee seismic zone. Although the causative fault is not known, the earthquake had a predominantly strike-slip mechanism with an estimated hypocentral depth of about 8 km. It was felt over a distance of 500 km stretching from Southern Kentucky to Georgia. Strong shaking, capable of causing slight damage, was reported near the epicenter. The Watts Bar nuclear power plant (NPP) is only 4.9 km from the epicenter of the earthquake and experienced only slight shaking. The earthquake was recorded by the plant’s seismic strong-motion instrumentation installed at four different locations. Near-real-time calculations by the plant operators indicated that the operating basis earthquake (OBE) ground motion was not exceeded during the earthquake. We obtained and processed the recorded motions to calculate corrected accelerations, velocities, and displacements. In addition, we computed the Fourier and 5% damped response spectra to compare them with the plant’s OBE. Comparisons of the ground-motion prediction models with the digital recordings at the plant site indicated that recorded ground motions were significantly below the predicted results calculated using the ground-motion prediction models approved for regulatory use. Availability of high-quality, digital recordings in this case helped make a quick decision about the ground motions not exceeding the OBE and hence prevented unnecessary shutdown of the NPP. Availability of earthquake recordings from the four locations in the NPP also presented an opportunity to analyze the linear response of plant structures.

Strong Ground Motion Prediction Using Virtual Earthquakes

Science ◽  
2014 ◽  
Vol 343 (6169) ◽  
pp. 399-403 ◽  
Author(s):  
M. A. Denolle ◽  
E. M. Dunham ◽  
G. A. Prieto ◽  
G. C. Beroza
Keyword(s):  
Ground Motion ◽  
Strong Ground Motion ◽  
Motion Prediction ◽  
Ground Motion Prediction ◽  
Strong Ground Motion Prediction ◽  
Strong Ground
Sign in / Sign up

Export Citation Format

Share Document