Minimum five-year outcomes of reverse total shoulder arthroplasty using a trabecular metal glenoid base plate

2021 ◽  
Vol 103-B (8) ◽  
pp. 1333-1338
Author(s):  
Pradeep Kankanalu ◽  
Zakk M. Borton ◽  
Marie L. Morgan ◽  
Tim Cresswell ◽  
Marius P. Espag ◽  
...  
Keyword(s):  
At Risk ◽  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Base Plate ◽  
Reverse Total Shoulder Arthroplasty ◽  
Trabecular Metal ◽  
Reverse Total Shoulder ◽  
Glenoid Loosening

Aims Reverse total shoulder arthroplasty (RTSA) using trabecular metal (TM)-backed glenoid implants has been introduced with the aim to increase implant survival. Only short-term reports on the outcomes of TM-RTSA have been published to date. We aim to present the seven-year survival of TM-backed glenoid implants along with minimum five-year clinical and radiological outcomes. Methods All consecutive elective RTSAs performed at a single centre between November 2008 and October 2014 were reviewed. Patients who had primary TM-RTSA for rotator cuff arthropathy and osteoarthritis with deficient cuff were included. A total of 190 shoulders in 168 patients (41 male, 127 female) were identified for inclusion at a mean of 7.27 years (SD 1.4) from surgery. The primary outcome was survival of the implant with all-cause revision and aseptic glenoid loosening as endpoints. Secondary outcomes were clinical, radiological, and patient-related outcomes with a five-year minimum follow-up. Results The implant was revised in ten shoulders (5.2%) with a median time to revision of 21.2 months (interquartile range (IQR) 9.9 to 41.8). The Kaplan-Meier survivorship estimate at seven years was 95.9% (95% confidence interval (CI) 91.7 to 98; 35 RTSAs at risk) for aseptic mechanical failure of the glenoid and 94.8% (95% CI 77.5 to 96.3; 35 RTSAs at risk) for all-cause revision. Minimum five-year clinical and radiological outcomes were available for 103 and 98 RTSAs respectively with a median follow-up time of six years (IQR 5.2 to 7.0). Median postoperative Oxford Shoulder Score was 38 (IQR 31 to 45); median Constant and Murley score was 60 (IQR 47.5 to 70); median forward flexion 115° (IQR 100° to 125°); median abduction 95° (IQR 80° to 120°); and external rotation 25° (IQR 15° to 40°) Scapular notching was seen in 62 RTSAs (63.2%). Conclusion We present the largest and longest-term series of TM-backed glenoid implants demonstrating 94.8% all-cause survivorship at seven years. Specifically pertaining to glenoid loosening, survival of the implant increased to 95.9%. In addition, we report satisfactory minimum five-year clinical and radiological outcomes. Cite this article: Bone Joint J 2021;103-B(8):1333–1338.

scholarly journals Is reverse total shoulder arthroplasty (rTSA) more advantageous than anatomic TSA (aTSA) for osteoarthritis with intact cuff tendon? A systematic review and meta-analysis

2022 ◽  
Vol 23 (1) ◽  
Author(s):  
Hyojune Kim ◽  
Chul-Ho Kim ◽  
Minsoo Kim ◽  
Wonsun Lee ◽  
In-Ho Jeon ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Shoulder Arthroplasty ◽  
Revision Rate ◽  
Meta Analysis ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
Functional Scores ◽  
Reverse Total Shoulder ◽  
Glenoid Loosening

Abstract Purpose We aimed to compare the outcomes and complications of anatomical shoulder arthroplasty (aTSA) and reverse total shoulder arthroplasty (rTSA) for primary glenohumeral osteoarthritis with intact cuff tissue. Materials and methods The MEDLINE, Embase, and Cochrane Library databases were systematically searched for studies published before March 2, 2021 using the PRISMA guidelines. Studies were included if they directly compared aTSA and rTSA for treating primary glenohumeral arthritis. A meta-analysis was performed using six studies that compared radiologic outcomes, functional scores, and range of motion (ROM). All the data were pooled using a random-effects model. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated as dichotomous data, while continuous data were analyzed using mean differences with 95% CIs. Results Two independent researchers reviewed 1,061 studies. Six studies met the inclusion criteria. The range of motion, especially external rotation, was better for aTSA than for rTSA (MD = − 10.28, 95% CI: − 16.69 to − 3.88, P = 0.002). Functional scores showed no difference between aTSA and rTSA. Glenoid loosening (OR = 0.17, 95% CI: 0.06–0.50, P = 0.001) was more common with aTSA, and scapula notching (OR = 10.63, 95% CI: 1.73–65.27, P = 0.01) with rTSA. In the mid-term follow-up, the overall revision rate showed no difference between aTSA and rTSA, with a pooled OR of 0.33 (95% CI: 0.07–1.57, P = 0.16). Conclusion A better ROM was achieved after aTSA than after rTSA. There was no difference in the revision rate at mid-term follow-up between aTSA and rTSA. Glenoid loosening was more common with aTSA, and scapula notching with rTSA. Level of evidence: Level IV, Meta-analysis.

Reassessing glenoid inclination in reverse total shoulder arthroplasty with glenosphere lateralization

2021 ◽  
Vol 103-B (2) ◽  
pp. 360-365
Author(s):  
Kuhan A. Mahendraraj ◽  
Maggie V. Shields ◽  
Florian Grubhofer ◽  
Samuel W. Golenbock ◽  
Andrew Jawa
Keyword(s):  
Heterotopic Ossification ◽  
Shoulder Arthroplasty ◽  
Patient Reported Outcomes ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Patient Reported ◽  
Reverse Total Shoulder

Aims Existing literature indicates that inferiorly inclined glenoid baseplates following reverse total shoulder arthroplasty (RSA) produce better outcomes compared to superiorly inclined baseplates. We aim to compare clinical outcomes for RSAs with superiorly and neutrally/inferiorly inclined lateralized glenospheres. Methods We retrospectively reviewed 154 consecutive patients undergoing RSA between July 2015 and July 2017 by one single-fellowship trained surgeon (AJ). Two raters (KAM and MVS) independently measured glenoid inclination in preoperative and minimum two year follow-up radiographs (anteroposterior/Grashey) using the RSA angle. Inclination was then compared to patient-reported outcomes, range of motion (ROM), and independently assessed degree of scapular notching and staging of heterotopic ossification at two year follow-up. Results Median postoperative inclination for each group was found to be -3.6° (interquartile range (IQR) -2.1 to -6.9) and 6.0° (3.2° to 10.1°) for the neutrally/inferiorly and superiorly inclined cohorts, respectively. Preoperative inclination was highly associated with postoperative inclination (p = 0.004). When comparing superiorly and neutrally/inferiorly inclined glenospheres, there were no differences in heterotopic ossification (p = 0.606), scapular notching (p = 0.367), American Shoulder and Elbow Surgeons score (p = 0.419), Single Assessment Numeric Evaluation (p = 0.417), Visual Analogue Scale (VAS) pain score (p = 0.290), forward elevation (p = 0.161), external rotation (p = 0.537), or internal rotation (p = 0.656). Conclusion Compared to neutral and inferior inclination, up to 6° ± 3° of superior glenoid baseplate inclination on a lateralized RSA design produces no differences in postoperative ROM or patient-reported outcomes, and produces similar levels of scapular notching and heterotopic ossification. Additionally, the degree of preoperative inclination represents an important factor in surgical decision-making as it is strongly associated with postoperative inclination. It is important to note that the findings of this study are only reflective of lateralized RSA prostheses. Cite this article: Bone Joint J 2021;103-B(2):360–365.

Reverse total shoulder arthroplasty using a trabecular metal glenoid base plate

2016 ◽  
Vol 98-B (7) ◽  
pp. 969-975 ◽  
Author(s):  
K. Theivendran ◽  
M. Varghese ◽  
R. Large ◽  
M. Bateman ◽  
M. Morgan ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Base Plate ◽  
Reverse Total Shoulder Arthroplasty ◽  
Trabecular Metal ◽  
Reverse Total Shoulder

Infographic: Minimum five-year outcomes of reverse total shoulder arthroplasty using a trabecular metal glenoid base plate

2021 ◽  
Vol 103-B (8) ◽  
pp. 1331-1332
Author(s):  
Pradeep Kankanalu ◽  
Zakk M. Borton ◽  
Marie L. Morgan ◽  
Tim Cresswell ◽  
Marius P. Espag ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Base Plate ◽  
Reverse Total Shoulder Arthroplasty ◽  
Trabecular Metal ◽  
Reverse Total Shoulder

scholarly journals Supraspinatus Tenotomy in Reverse Shoulder Arthroplasty for Fractures: A Comparative Cohort Study

2021 ◽  
Vol 12 ◽  
pp. 215145932110199
Author(s):  
Georg Siebenbürger ◽  
Evi Fleischhacker ◽  
Johannes Gleich ◽  
Tobias Helfen ◽  
Wolfgang Böcker ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Functional Outcome ◽  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Supraspinatus Tendon ◽  
Reverse Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder

Background: The aim of this study was to evaluate the functional and radiographic outcome in patients with reverse total shoulder arthroplasty (RSA) for displaced proximal humeral fractures (PHF) with or without tenotomy of the supraspinatus tendon. Methods: Between June 2011 and June 2018, 159 patients (age >65 years) with a displaced proximal humeral fracture underwent reverse total shoulder arthroplasty (Grammont design) in a single-center study and were longitudinally followed up. In all cases, the tuberosities were attached to the prosthesis in a standardized procedure. Functional outcome, range of motion as well as tuberosity integration, resorption and displacement were assessed at final follow-up. Outcomes were compared between patients that underwent RSA in combination with tenotomy of the supraspinatus (ST) and patients that underwent RSA without supraspinatus tenotomy (NT). Results: At a mean follow up of 22.2 ± 16.4 months 76 patients (mean age 77.1 ± 7.2 years, 83% women) could be evaluated (follow-up rate 47.8%). There were no statistically significant differences between the ST (n = 29) and NT groups (n = 47) in tuberosity integration, resorption </≥50%, or displacement (p = 0.99/0.31/0.7/0.99). Functional outcome was better in ST group (Constant score 76.2 ± 5.9 vs. 64.5 ± 12.8; p < 0.05) especially regarding mean active external rotation (>20°: 65.5% vs. 14.9%, p < 0.05) and active abduction (>120°: 89.7% vs. 21.3%, p < 0.05). Tuberosity integration (ST and NT together: n = 34) showed better functional results than resorption or displacement (p < 0.05). Conclusions: Tenotomy of the supraspinatus tendon in RSA for displaced PHF leads to similar radiographic results regarding tuberosity integration, resorption and displacement but better functional outcome with regard to range of motion. Level of Evidence: III

Mid-term outcomes after reverse total shoulder arthroplasty with latissimus dorsi transfer

2021 ◽  
pp. 175857322199634
Author(s):  
Akshar V Patel ◽  
Douglas J Matijakovich ◽  
Robert L Brochin ◽  
Ryley K Zastrow ◽  
Bradford O Parsons ◽  
...  
Keyword(s):  
Rotator Cuff ◽  
Shoulder Arthroplasty ◽  
Latissimus Dorsi ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
P Value ◽  
Latissimus Dorsi Transfer ◽  
Reverse Total Shoulder

Background Reverse total shoulder arthroplasty is a common treatment for patients with rotator cuff arthropathy who have failed a prior rotator cuff repair. Latissimus dorsi transfer can be performed simultaneously to reverse total shoulder arthroplasty for patients with preoperative external rotation deficiency. Current literature is limited with several studies providing functional and pain improvements at short-term follow-up; however, there is a deficit in data regarding mid-term outcomes. The purpose of this study was to evaluate the clinical and radiographic outcomes following reverse total shoulder arthroplasty with latissimus dorsi transfer with mid-term follow-up. We hypothesized significant improvement in external rotation and shoulder functionality for patients with preoperative external rotation lag. Methods We retrospectively reviewed patients who underwent reverse total shoulder arthroplasty with latissimus dorsi transfer. Preoperative and postoperative changes in range of motion were assessed. American Shoulder and Elbow Surgeon Score and the Simple Shoulder Test were used to evaluate changes in shoulder function while pain scores were assessed using the Visual Analog Scale (VAS). Radiographs were reviewed for rotator cuff arthropathy, fatty infiltration, scapular notching, baseplate loosening, and osteolysis. We reported frequency and mean ± standard deviation for categorical and continuous variables, respectively. Means were compared using the paired Student's t-test and proportions using the Chi-square test. Results Fifteen patients met the inclusion criteria. The mean age of the cohort was 71.7 ± 8.4 years (range 51.2–87.8 years) with a mean follow-up of 6.3 ± 4.1 years (range 1.0–14.5 years). Reverse total shoulder arthroplasty with latissimus dorsi transfer improved external rotation (−7 ± 21.3° to 38 ± 15.8°; p value = 0.001). There was no statistically significant difference regarding forward flexion (116.3 ± 45.4° to 133.7 ± 14.7°; p value = 0.17) and internal rotation (T12 to L2; p value = 0.57). The procedure led to an increase in American Shoulder and Elbow Surgeon Score scores (37 ± 19 to 62 ± 22; p = 0.005) and Simple Shoulder Test scores (2 ± 2 to 6 ± 3; p value = 0.001) with a significant reduction in Visual Analog Scale scores (5 ± 3 to 2 ± 3; p value = 0.022). The procedure corrected external rotation lag in 10 patients. Radiographically, rotator cuff arthropathy was found to be grade 3 in two patients, grade 4 A in four patients, grade 4B in eight patients, and grade 5 in one patient. On postoperative imaging, scapular notching was found in six patients (40%). Twelve patients had cortical humeral erosion at the site of the latissimus dorsi transfer. Only one patient experienced a shoulder-related complication which was aseptic baseplate loosening and required a revision reverse total shoulder arthroplasty with allograft. Conclusions In this study, patients undergoing reverse total shoulder arthroplasty with latissimus dorsi transfer experienced improvements in range of motion, functional scores, and pain at mid-term follow-up. The shoulder-related complication rate was low. Level of evidence: IV; Case series.

Five-year outcome after conversion of a hemiarthroplasty when used for the treatment of a proximal humeral fracture to a reverse total shoulder arthroplasty

2018 ◽  
Vol 100-B (6) ◽  
pp. 761-766 ◽  
Author(s):  
M. Holschen ◽  
M-K. Siemes ◽  
K-A. Witt ◽  
J. Steinbeck
Keyword(s):  
Shoulder Arthroplasty ◽  
Proximal Humeral Fracture ◽  
Constant Score ◽  
Total Shoulder Arthroplasty ◽  
Operating Time ◽  
Humeral Fracture ◽  
Reverse Total Shoulder Arthroplasty ◽  
The Mean ◽  
Reverse Total Shoulder

Aims The reasons for failure of a hemirthroplasty (HA) when used to treat a proximal humeral fracture include displaced or necrotic tuberosities, insufficient metaphyseal bone-stock, and rotator cuff tears. Reverse total shoulder arthroplasty (rTSA) is often the only remaining form of treatment in these patients. The aim of this study was to evaluate the clinical outcome after conversions from a failed HA to rTSA. Material and Methods A total of 35 patients, in whom a HA, as treatment for a fracture of the proximal humerus, had failed, underwent conversion to a rTSA. A total of 28 were available for follow-up at a mean of 61 months (37 to 91), having been initially reviewed at a mean of 20 months (12 to 36) postoperatively. Having a convertible design, the humeral stem could be preserved in nine patients. The stem was removed in the other 19 patients and a conventional rTSA was implanted. At final follow-up, patients were assessed using the American Shoulder and Elbow Surgeons (ASES) score, the Constant Score, and plain radiographs. Results At final follow-up, the mean ASES was 59 (25 to 97) and the mean adjusted Constant Score was 63% (23% to 109%). Both improved significantly (p < 0.001). The mean forward flexion was 104° (50° to 155°) and mean abduction was 98° (60° to 140°). Nine patients (32%) had a complication; two had an infection and instability, respectively; three had a scapular fracture; and one patient each had delayed wound healing and symptomatic loosening. If implants could be converted to a rTSA without removal of the stem, the operating time was shorter (82 minutes versus 102 minutes; p = 0.018). Conclusion After failure of a HA in the treatment of a proximal humeral fracture, conversion to a rTSA may achieve pain relief and improved shoulder function. The complication rate is considerable. Cite this article: Bone Joint J 2018;100-B:761–6.

scholarly journals Mid-term outcomes of bony increased offset-reverse total shoulder arthroplasty in the Asian population

2021 ◽  
Vol 24 (3) ◽  
pp. 125-134
Author(s):  
Kirtan Tankshali ◽  
Dong-Whan Suh ◽  
Jong-Hun Ji ◽  
Chang-Yeon Kim
Keyword(s):  
Los Angeles ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
Intraoperative Complications ◽  
Total Shoulder Arthroplasty ◽  
Asian Population ◽  
Reverse Total Shoulder Arthroplasty ◽  
Scapular Notching ◽  
Reverse Total Shoulder

Background: To evaluate clinical and radiological outcomes of bony increased offset-reverse total shoulder arthroplasty (BIO-RSA) in the Asian population at mid-term follow-up.Methods: From June 2012 to August 2017 at a single center, 43 patients underwent BIO-RSA, and 38 patients with a minimum of 2 years of follow-up were enrolled. We evaluated the preoperative and postoperative clinical outcomes, radiological outcomes (notching and loosening), and complications of BIO-RSA at the last follow-up. In addition, we divided these patients into notching and not-notching groups and compared the demographics, preoperative, and postoperative characteristics of patients between the two groups.Results: Visual analog scale, American Shoulder and Elbow Surgeons, University of California-Los Angeles, and Simple Shoulder Test scores improved significantly from preoperative (average: 5, 39.43, 16.22, 3.94) to postoperative (average: 1.71, 78.91, 28.34, 7.8; p<0.05) outcomes. All range of motion except internal rotation improved significantly at the final follow-up (p<0.05), and the bone graft was well-incorporated with the native glenoid in all patients (100%). However, scapular notching was observed in 20/38 patients (53%). In the comparison between notching and not-notching groups (18 vs. 20 patients), there were no significant differences in demographics, radiological parameters, and clinical outcomes except acromion-greater tuberosity (AT) distance (p=0.003). Intraoperative complications were three metaphyseal fractures and one inferior screw malposition. Postoperative complications included one heterotopic ossification, one scapula neck stress fracture, one humeral stem loosening, and one late infection.Conclusions: BIO-RSA resulted in improved clinical outcomes at mid-term follow-up in the Asian population. Although better cosmesis and advantages of glenoid lateralization were observed, we observed higher rates of scapular notching compared to previously reported rates in BIO-RSA studies. In addition, adequate glenoid lateralization with appropriate humeral lengthening (AT distance) might reduce scapular notching.

Sign in / Sign up

Export Citation Format

Share Document