Modeling of High-Temperature Deformation of Commercial Pure Aluminum (1050)

2004 ◽  
Vol 13 (2) ◽  
pp. 241-247 ◽  
Author(s):  
M. Abo-Elkhier
2006 ◽  
Vol 510-511 ◽  
pp. 342-345 ◽  
Author(s):  
Dong Suk Lee ◽  
Taek Kyun Jung ◽  
Gyu-Sam Shim ◽  
Mok Soon Kim ◽  
Won Yong Kim ◽  
...  

The mechanical properties of pre-sintered Al-10Si-5Fe-1Cu-0.5Mg-1Zr (wt%) alloy were investigated in the temperature range from 673K to 813K and at initial strain rates from 10-4 to 100 s-1. In the high temperature range of 793K and 813K, the strain rate sensitivity index was close to that for superplasticity (0.3). Stress exponent was estimated to be 2 and 5 in the temperature range from 793K to 813K and from 673K to 773K, respectively. The activation energies for the plastic flow were calculated to 77kJ/mol for the n=2 region and 127kJ/mol for the n=5 region. These values were close to that for grain boundary diffusion and self-diffusion in pure aluminum, respectively. We found that a dynamic recrystallization (DRX) and grain boundary sliding (GBS) occur depending on the test temperature and stain rate. A filament-like phase containing Cu and Mg was observed in the cracked surface of the specimen deformed at 793K and 813K.


2008 ◽  
Vol 57 (6) ◽  
pp. 543-547
Author(s):  
Takuma WADA ◽  
Takahiro KAKEI ◽  
Hiroyuki HORII ◽  
Takeshi SHIONO ◽  
Yasunori OKAMOTO

Sign in / Sign up

Export Citation Format

Share Document