HFIR Steels Embrittlement: The Possible Effect of Gamma Field Contribution

Author(s):  
I Remec ◽  
>J-A Wang ◽  
FBK Kam
Keyword(s):  
2021 ◽  
Author(s):  
Ali Mehrvar ◽  
Alireza Mirak ◽  
Mohsen Motamedi

Abstract A special position has been created for using the nickel-based single-crystal CMSX-4 superalloy at high temperatures due to the improved mechanical properties of this material and the absence of grain boundary in the crystal lattice. Also, electrochemical machining can be an effective method for machining this superalloy due to its unique performance in metal machining, like creating stress-free surfaces, high-level surface smoothness, and machining of complex geometries. This single crystal superalloy's microstructure consists of three phases: Gamma, Gamma prime, and a bit of carbide. Gamma prime is distributed cubically and homogeneously in the Gamma field without any boundaries and as a single crystal. It is essential not to change the microstructure after the production process or machining. In the present research, electrochemical machining was performed on CMSX-4 single crystal superalloy. The workpiece's microstructure was then investigated before and after electrochemical machining using scanning electron microscopy and EDS analysis from two sides. No changes were seen in CMSX-4 infrastructure after electrochemical machining EDS analysis and Images.


Author(s):  
S. Zaritsky ◽  
A. Egorov ◽  
B. Ošmera ◽  
M. Mařik ◽  
V. Rypar ◽  
...  

2009 ◽  
pp. 432-432-4
Author(s):  
Z. Bureš ◽  
F. Cvachovec ◽  
P. Čeleda ◽  
J. Kroupa ◽  
B. Ošmera ◽  
...  

Science ◽  
1953 ◽  
Vol 118 (3059) ◽  
pp. 3-3
Author(s):  
H. J. CURTIS
Keyword(s):  

2009 ◽  
Vol 168 (1) ◽  
pp. 29-34 ◽  
Author(s):  
Antoaneta Roca ◽  
Yuan-Hao Liu ◽  
Ray Moss ◽  
Finn Stecher-Rasmussen ◽  
Sander Nievaart

2020 ◽  
Vol 225 ◽  
pp. 04030
Author(s):  
A. Gruel ◽  
D. Fourmentel ◽  
C. El Younoussi ◽  
B. El Bakkari ◽  
Y. Boulaich ◽  
...  

The CNESTEN (National Center for Energy Sciences and Nuclear Technology, Morocco) operates a TRIGA Mark II reactor, which can reach a thermal maximum power at steady state of 2 MW. In reactors devoted to research and experiments, it is mandatory to characterize the neutron and photon fields in the irradiation positions. Together with a computational model of the core, it ensures the ability to reach the requested uncertainties when performing experiments, such as detectors testing, irradiation for hardening or nuclear data measurements. The neutron field of different irradiation positions has been characterized by dosimetry techniques and compared to the MCNP full model of the reactor. Preliminary photon propagation calculations are also performed with this model, but up to now, no experimental validation of the results exists. The aim of the newly set collaboration between CEA and CNESTEN is to characterize the gamma field of these positions. The first position investigated is the part of the NB1 tangential channel closest to the core. Among gamma measurements techniques, and according to the constraints arising from using this channel, it was chosen to use thermos- and optically stimulated luminescent detectors. This paper presents the experiments carried out in September 2018 as well as their results. Three detectors types were used: TLD400 (CaF2:Mn), TLD700 (7LiF:Mg,Ti) and OSLD (Al2O3:C). Measurements were performed in several steps: background measurements, transient measurements (divergence phase + SCRAM), and irradiation at steady state. In the end, these measurements will provide a dose as well as a gamma flux value for this position.


2003 ◽  
Vol 67 (3-4) ◽  
pp. 581-585 ◽  
Author(s):  
M. Ranogajec-Komor ◽  
S. Miljanić ◽  
S. Blagus ◽  
Ž. Knežević ◽  
M. Osvay

Sign in / Sign up

Export Citation Format

Share Document