High Haze and Low Resistive MgO/AZO Bi-layer Transparent Conducting Oxide for Thin Film Solar Cells

2011 ◽  
Vol 1327 ◽  
Author(s):  
Dong Won Kang ◽  
Jong Seok Woo ◽  
Sung Hwan Choi ◽  
Seung Yoon Lee ◽  
Heon Min. Lee ◽  
...  

ABSTRACTWe have propsed MgO/AZO bi-layer transparent conducting oxide (TCO) for thin film solar cells. From XRD analysis, it was observed that the full width at half maximum of AZO decreased when it was grown on MgO precursor. The Hall mobility of MgO/AZO bi-layer was 17.5cm2/Vs, whereas that of AZO was 20.8cm2/Vs. These indicated that the crystallinity of AZO decreased by employing MgO precursor. However, the haze (=total diffusive transmittance/total transmittance) characteristics of highly crystalline AZO was significantly improved by MgO precursor. The average haze in the visible region increased from 14.3 to 48.2%, and that in the NIR region increased from 6.3 to 18.9%. The reflectance of microcrystalline silicon solar cell was decreased and external quantum efficiency was significantly improved by applying MgO/AZO bi-layer TCO. The efficiency of microcrystalline silicon solar cell with MgO/AZO bi-layer front TCO was 6.66%, whereas the efficiency of one with AZO single TCO was 5.19%.

Author(s):  
M. I. Khalil ◽  
R. Bernasconi ◽  
A. Lucotti ◽  
A. Le Donne ◽  
R. A. Mereu ◽  
...  

Abstract Earth-abundant and non-toxic Kesterite-based Cu2ZnSnS4 (CZTS) thin film solar cells are successfully fabricated on flexible Molybdenum (Mo) foil substrates by an electrodeposition-annealing route. A well-adherent, densely packed, homogeneous, compact, and mirror-like CZT precursor is initially produced through electrodeposition by using a rotating working electrode. Subsequently, the co-electrodeposited CuZnSn (CZT) precursor is sulfurized in quartz tube furnace at 550 °C for 2 h in N2 atmosphere with the presence of elemental sulfur in order to form CZTS. Different characterization techniques like XRD, SEM, HR-TEM, Raman, and Photoluminescence demonstrate that almost phase-pure CZTS formed after sulfurization. A flexible Al/Al-ZnO/i-ZnO/CdS/CZTS/Mo foil solar cell is produced, where CdS is deposited by chemical bath deposition and transparent conducting oxide (TCO) is deposited by DC sputtering. The CZTS solar device shows a 0.55% power conversion efficiency on flexible Mo foil substrate and it constitutes the first prototype of this kind of solar cell produced by electrodeposition-annealing route without any surface modification of the Mo substrate. Graphic abstract


Solar Energy ◽  
2004 ◽  
Vol 77 (6) ◽  
pp. 739-747 ◽  
Author(s):  
Tokio Nakada ◽  
Yutaka Hirabayashi ◽  
Takehito Tokado ◽  
Daiske Ohmori ◽  
Takahiro Mise

2016 ◽  
Vol 26 (48) ◽  
pp. 8854-8854 ◽  
Author(s):  
Wenxi Guo ◽  
Zijie Xu ◽  
Fayin Zhang ◽  
Shuyao Xie ◽  
Hongyao Xu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document