Practicing and Learning of Shale Gas Staged Fracturing in Sichuan Basin -A Case for the W1 Horizontal Well

Author(s):  
Yongqiang Fu ◽  
Yongjun Xiao ◽  
Yuanlin Chen ◽  
Lixin Zeng
2021 ◽  
Author(s):  
Juntao Yan ◽  
Yongqiang Fu ◽  
Chengfeng Guo ◽  
Jeremy A Greenwood ◽  
Lingjun Wang ◽  
...  

Abstract Sichuan shale gas development will move to reservoirs deeper than 3,500m TVD in the future after a production milestone breakthrough of 10 billion m3 per year from Southern Sichuan basin was achieved. 80% of Sichuan shale gas total resources will come from deep reserves compared to reservoirs at a shallower depth. Improvements in drilling efficiency are the key success factor of deep shale gas development to enhance production and cost control with the increasing activity. Due to complex engineering and geological conditions, drilling deep shale gas horizontal wells in the Southern Sichuan basin is more challenging than traditional shallower wells. The High Pressure and High Temperature (HPHT) harsh drilling environment has caused the frequent failure of the standard Rotary Steerable System (RSS), Measurement While Drilling (MWD), and Logging While Drilling (LWD) tools during recent drilling operations. The surface cooling system, combined with thermal mitigation practices, positively impacted the increasing trend of bottom hole circulating temperature (BHCT) and extended equipment life in short horizontal sections. However, thermal mitigation reduced in effectiveness with the increase in the length of the horizontal section as frictional heating increased. BHCT reached above 150degC while drilling and exceeded the operating limits of standard tools. The challenge of managing the circulating temperatures resulted in approximately 50% of the total runs in 2020 being tripped before the run objectives were met, creating non-production time (NPT) and significantly decreasing drilling efficiency. To overcome this challenge and reduce NPT, two options were evaluated. A high-temperature Motor bottom hole assembly (BHA) brought risks of poor well trajectory control, resulting in well placement issues during geosteering, and lower potential reservoir exposure. For the first time in China Shale gas, an HPHT RSS with near-bit gamma-ray imaging was selected to maximize drilling efficiency and reservoir exposure. In addition to the tool selection, an HT optimization process was created that included horizontal well BHCT modeling and prediction and deep shale gas RSS drilling best practices. The near-bit gamma imaging quality was enhanced to improve steering. These changes delivered record runs in deep shale gas long horizontal wells and significantly decreased NPT. Reducing the reliance on surface cooling systems also increased overall operating efficiency. This paper reviews the choice of equipment, implementation of HPHT RSS, and development of HT optimization process that improved the drilling efficiency, reduced well time and enhanced long horizontal well placement in this complex drilling environment.


Author(s):  
Roger Yuan ◽  
Fa Dwan ◽  
Navpreet Singh ◽  
Liang Jin ◽  
Danny Soo ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2679
Author(s):  
Yuying Zhang ◽  
Shu Jiang ◽  
Zhiliang He ◽  
Yuchao Li ◽  
Dianshi Xiao ◽  
...  

In order to analyze the main factors controlling shale gas accumulation and to predict the potential zone for shale gas exploration, the heterogeneous characteristics of the source rock and reservoir of the Wufeng-Longmaxi Formation in Sichuan Basin were discussed in detail, based on the data of petrology, sedimentology, reservoir physical properties and gas content. On this basis, the effect of coupling between source rock and reservoir on shale gas generation and reservation has been analyzed. The Wufeng-Longmaxi Formation black shale in the Sichuan Basin has been divided into 5 types of lithofacies, i.e., carbonaceous siliceous shale, carbonaceous argillaceous shale, composite shale, silty shale, and argillaceous shale, and 4 types of sedimentary microfacies, i.e., carbonaceous siliceous deep shelf, carbonaceous argillaceous deep shelf, silty argillaceous shallow shelf, and argillaceous shallow shelf. The total organic carbon (TOC) content ranged from 0.5% to 6.0% (mean 2.54%), which gradually decreased vertically from the bottom to the top and was controlled by the oxygen content of the bottom water. Most of the organic matter was sapropel in a high-over thermal maturity. The shale reservoir of Wufeng-Longmaxi Formation was characterized by low porosity and low permeability. Pore types were mainly <10 nm organic pores, especially in the lower member of the Longmaxi Formation. The size of organic pores increased sharply in the upper member of the Longmaxi Formation. The volumes of methane adsorption were between 1.431 m3/t and 3.719 m3/t, and the total gas contents were between 0.44 m3/t and 5.19 m3/t, both of which gradually decreased from the bottom upwards. Shale with a high TOC content in the carbonaceous siliceous/argillaceous deep shelf is considered to have significant potential for hydrocarbon generation and storage capacity for gas preservation, providing favorable conditions of the source rock and reservoir for shale gas.


Sign in / Sign up

Export Citation Format

Share Document