Water Control in High-Water-Cut Oil Wells using Relative Permeability Modifiers: A Saudi Lab Study

2017 ◽  
Author(s):  
Ibrahim Al-Hulail ◽  
Muzzammil Shakeel ◽  
Ahmed Binghanim ◽  
Mohamed Zeghouani ◽  
Raed Rahal ◽  
...  
Keyword(s):  
Relative Permeability ◽  
High Water ◽  
Oil Wells ◽  
Water Control ◽  
High Water Cut ◽  
Water Cut

Preventing Proppant and Formation-Sand Production in High Water Cut, Heavy-Oil Wells: A Field Study from Argentina

2009 ◽  
Author(s):  
Daniel Daparo ◽  
Luis Soliz ◽  
Eduardo Roberto Perez ◽  
Carlos Iver Vidal Saravia ◽  
Philip Duke Nguyen ◽  
...  
Keyword(s):  
Field Study ◽  
Heavy Oil ◽  
High Water ◽  
Oil Wells ◽  
Sand Production ◽  
High Water Cut ◽  
Water Cut

Preventing Proppant and Formation-Sand Production in High Water Cut, Heavy-Oil Wells: A Field Study from Argentina

2009 ◽  
Author(s):  
D. Daparo ◽  
L. Solis ◽  
E. Perez ◽  
C. Saravia ◽  
P.D. Nguyen ◽  
...  
Keyword(s):  
Field Study ◽  
Heavy Oil ◽  
High Water ◽  
Oil Wells ◽  
Sand Production ◽  
High Water Cut ◽  
Water Cut

Selective Stimulation and Water Control in High-Water-Cut Wells: Case Histories from Upper Magdalena Valley Basin in Colombia

2011 ◽  
Author(s):  
Eusebio Alejandro Rodriguez ◽  
Juan Manuel Leon Hinestrosa ◽  
Cesar Augusto Duarte ◽  
Wilson Alexander Martinez Ardila ◽  
Alexis Ortega ◽  
...  
Keyword(s):  
High Water ◽  
Case Histories ◽  
Water Control ◽  
Selective Stimulation ◽  
High Water Cut ◽  
Water Cut

scholarly journals Effects of oil viscosity on waterflooding: A case study of high water-cut sandstone oilfield in Kazakhstan

2020 ◽  
Vol 12 (1) ◽  
pp. 1736-1749
Author(s):  
Jincai Wang ◽  
Zifei Fan ◽  
Lun Zhao ◽  
Li Chen ◽  
Jun Ni ◽  
...  
Keyword(s):  
High Water ◽  
High Viscosity ◽  
Oil Wells ◽  
Oil Reservoirs ◽  
Low Viscosity ◽  
Well Pattern ◽  
Remaining Oil ◽  
Oil Water ◽  
High Water Cut ◽  
Water Cut

Abstract After a sandstone oilfield enters the high water-cut period, the viscosity of crude oil has an important influence on remaining oil distribution and waterflooding characteristics under the same factors of, e.g., reservoir quality and development methods. Based on a comprehensive interpretation of the waterflooded layers in new oil wells, physical simulation experiments, and reservoir numerical simulations, we analyzed the waterflooding laws of a high water-cut sandstone reservoir with different oil viscosities in Kazakhstan under the same oil production speed, and we clarified the remaining oil potential of reservoirs with different viscosities and proposed corresponding development measures. The results show that low-viscosity oil reservoirs (1 mPa s) have uniform waterflooding, thick streamlines, small waterflooding areas, and low overall waterflooding degrees because of their homogeneous oil–water viscosities. However, within waterflooded areas, the reservoirs have high oil displacement efficiencies and high waterflooding degrees, and the remaining oil is mainly concentrated in the unwaterflooded areas; therefore, the initial production and water cut in new oil wells vary significantly. High-viscosity oil reservoirs (200 mPa s) have severe waterflooding fingering, large waterflooding areas, and high overall waterflooded degrees because of their high oil–water mobility ratios. However, within waterflooded areas, the reservoirs have low oil displacement efficiencies and low waterflooding degrees, and the remaining oil is mainly concentrated in both the waterflooded areas and the unwaterflooded areas; therefore, the differences in the initial production and water cut of new oil wells are small. Moderate-viscosity oil reservoirs (20 mPa s) are characterized by remaining oil distributions that are somewhere in between those of the former two reservoirs. Therefore, in the high water-cut period, as the viscosity of crude oil increases, the efficiency of waterflooding gradually deteriorates and the remaining oil potential increases. In the later development, it is suggested to implement the local well pattern thickening in the remaining oil enrichment area for reservoirs with low viscosity, whereas a gradual overall well pattern thickening strategy is recommended for whole reservoirs with moderate and high viscosity. The findings of this study can aid better understanding of waterflooding law and the remaining oil potential of reservoirs with different viscosities and proposed corresponding development measures. The research results have important guidance and reference significance for the secondary development of high water-cut sandstone oilfields.

Combining Stimulation and Water Control in High-Water-Cut Wells

2010 ◽  
Author(s):  
Oscar Julian Jaramillo ◽  
Ricardo Romero ◽  
German Lucuara ◽  
Alexis Ortega ◽  
Arthur William Milne ◽  
...  
Keyword(s):  
High Water ◽  
Water Control ◽  
High Water Cut ◽  
Water Cut
Sign in / Sign up

Export Citation Format

Share Document