Welltest interpretation requires the diagnosis of reservoir flow regimes to determine basic reservoir characteristics. In hydraulically fractured tight gas reservoirs, the reservoir flow regimes may not clearly be revealed on diagnostic plots of transient pressure and its derivative due to extensive wellbore storage effect, fracture characteristics, heterogeneity, and complexity of reservoir. Thus, the use of conventional welltest analysis in interpreting the limited acquired data may fail to provide reliable results, causing erroneous outcomes. To overcome such issues, the second derivative of transient pressure may help eliminate a number of uncertainties associated with welltest analysis and provide a better estimate of the reservoir dynamic parameters.
This paper describes a new approach regarding welltest interpretation for hydraulically fractured tight gas reservoirs—using the second derivative of transient pressure. Reservoir simulations are run for several cases of non-fractured and hydraulically fractured wells to generate different type curves of pressure second derivative, and for use in welltest analysis.
A field example from a Western Australian hydraulically fractured tight gas welltest analysis is shown, in which the radial flow regime could not be identified using standard pressure build-up diagnostic plots; therefore, it was not possible to have a reliable estimate of reservoir permeability. The proposed second derivative of pressure approach was used to predict the radial flow regime trend based on the generated type curves by reservoir simulation, to estimate the reservoir permeability and skin factor. Using this analysis approach, the permeability derived from the welltest was in good agreement with the average core permeability in the well, thus confirming the methodology’s reliability.
