Pulsed Neutron Spectroscopy Logs Add Value to Steam Flood Management Process by Monitoring Oil Saturation in Kern River Field, California

1995 ◽  
Author(s):  
Thomas A. Zalan ◽  
Paul C. Henshaw ◽  
Harold P. Abels ◽  
Brian K. Owens ◽  
Dunsati S. Guo ◽  
...  
2020 ◽  
Author(s):  
Tong Zhou ◽  
◽  
David Rose ◽  
Jeffrey Miles ◽  
Jason Gendur ◽  
...  

2014 ◽  
Author(s):  
Ezechukwu Nduka ◽  
Anijekwu Chinedu ◽  
Nwoke Linus ◽  
Oghene Nkonyeasua ◽  
Emeka Ezeike ◽  
...  

Author(s):  
Azzan Al-Yaarubi ◽  
Khalsa Al-Hadidi ◽  
Rinat Lukmanov ◽  
Ali Al-Mahrouqi ◽  
Marcel Elie

2021 ◽  
Author(s):  
Rafael Zambrano ◽  
Yevhen Makar ◽  
Michael Sadivnyk ◽  
Andriy Butenko ◽  
Oleksandr Doroshenko ◽  
...  

Abstract The Sakhalin Field is located in the Dnieper-Donets Basin, east of Ukraine, and has been producing 7.7 billion cubic meters of natural gas in place from carboniferous rocks since the 1980s. Notwithstanding, it is strongly believed that significant untapped resources remain in the field, specifically those classified as tight intervals. Advances in wireline logging technology have brought, besides better accuracy on measurements behind the casing, a new measurement called fast neutron cross-section (FNXS), which has proved to be sensitive enough to the volume of gas in low-porosity formations. This enabled a quantitative interpretation for a better understanding of where these additional resources may lie in the Sakhalin Field. The methodology is based on advanced pulsed neutron spectroscopy logs to assess the essential formation properties such as lithology, porosity, and gas saturation and reduce the evaluation uncertainty in potential tight gas intervals. The advanced technology combines measurements from multiple detectors that represent independent formation properties such as formation sigma, thermal neutron porosity, FNXS, and elemental fractions. To address the lithology, the tool measures directly the rock elements required to determine representative mineralogy and matrix properties, which in turn are used to compensate for the matrix effects and obtain a reliable porosity and gas volume estimation. The methodology was tested on the upper Visean productive zones (Mississippian epoch) characterized by its low porosity (<10 pu) and permeability (<10 mD). In the past, those intervals have been overlooked because of inconclusive petrophysical interpretation based on basic openhole logs and their low production in some areas of the field. The necessity to finding new reserves has motivated the re-evaluation of possible bypassed tight-gas intervals by logging of mature wells behind casing in different sectors of the field. Advanced pulsed neutron spectroscopy logging behind casing uniquely identifies reserves in tight-gas intervals where basic open-hole interpretations were ambiguous. The gas production obtained from the perforated intervals supports the formation evaluation parameters estimated from the standalone interpretation of the pulsed neutron data. This work describes in detail the application of the alternative methodology and interpretation workflow to evaluate the formation through the casing. A concrete example is presented to illustrate the effectiveness of this approach in the revealing and development of tight gas reservoirs in mature fields in the Dnieper-Donets Basin.


2021 ◽  
Author(s):  
Shouxiang Mark Ma ◽  
◽  
Nacer Guergueb ◽  
Weijun Guo ◽  
Mahmoud Eid ◽  
...  

Pulsed neutron carbon-oxygen (C/O) logging is a valuable measurement for dynamic reservoir saturation monitoring, especially in mixed salinity and fresh-water environments. Currently, all C/O logs are based on apparent C/O measurements, thus responses of raw data are not comparable between different tools. Tool-specific calibrations are used to convert apparent C/O log to reservoir oil saturation; the objective of C/O logging. In this paper, a new concept of intrinsic C/O logging is introduced so that raw data from different tools can be compared for enhanced log quality control and consistency of raw data and their applications. For a given system of rock, oil, and water, intrinsic carbon (C) and oxygen (O), thus C/O ratio, are theoretically calculated. For the same system, apparent C/O ratio measured by a generic C/O logging tool is also obtained using existing apparent C/O methodology. A correlation between the two is established, enabling an intrinsic C/O log output. Eleven laboratory physical tests and 120 Monte Carlo simulated case studies are conducted. Systems investigated include sandstone and limestone with different porosities and fluid saturations. Borehole sizes are 6 and 8 inches, and borehole fluids are water, oil, and their mixtures. Correlations between intrinsic and apparent C/O are established and concept of intrinsic C/O logging is verified.


Sign in / Sign up

Export Citation Format

Share Document