oil saturation
Recently Published Documents


TOTAL DOCUMENTS

572
(FIVE YEARS 171)

H-INDEX

28
(FIVE YEARS 5)

Author(s):  
Tadeusz Patzek ◽  
Ahmed Saad ◽  
Ahmed Hassan

Improved oil recovery from tight carbonate formations may provide the world with a major source of lower-rate power over several decades. Here we provide an overview of the Arab D formation in the largest oil field on earth, the Ghawar. We investigate the occurrence of microporosity of different origins and sizes using scanning electron microscopy (SEM) and pore casting techniques. Then, we present a robust calculation of the probability of invasion and oil saturation distribution in the nested micropores using mercury injection capillary pressure data available in the literature. We show that large portions of the micropores in Arab D formation would have been bypassed during primary drainage unless the invading crude oil ganglia were sufficiently long. Considering the asphaltenic nature of oil in the Ghawar, we expect the invaded portions of the pores to turn mixed-wet, thus becoming inaccessible to waterflooding until further measures are taken to modify the system’s chemistry.


Author(s):  
Zhao Bin ◽  
Zhu Guangyou ◽  
Shang Yanjun ◽  
Shao Peng

Author(s):  
E. A. Korolev ◽  
◽  
V. P. Morozov ◽  
A. A. Eskin ◽  
A. N. Kolchugin ◽  
...  

It was identified three stages of reservoir rock formation of the Pashyisky horizon of the Frasnian stage of the Upper Devonian at the Romashkinskoye field, based on optical microscopic studies. The first stage, associated with clastic deposits sedimentation and marked by clastic grains dense structural packing formation, close to cubic. The second diagenetic stage of quartz sandstones is associated with the subsidence stage of sediments into the burial zone. During this period were actively proceeding the processes of grains mechanical deformation, blastesis of quartz clasts, the formation of siderite fragments, and fibrous chalcedony, partially metasomatic replacing clay layers in sandstones. The third diagenetic stage in quartz sandstones is associated with the migration of underground gas-water solutions. Analysis of the transformation degree of the Pashyisky horizon quartz sandstones at different areas of the Romashkinskoye field revealed the relationship between the intensity of secondary diagenetic processes and the degree of rocks oil saturation. Keywords: pashyisky horizon; oil; sandstone; reservoir; diagenesis.


2021 ◽  
Author(s):  
Wael Abdallah ◽  
Ahmad Al-Zoukani ◽  
Shouxiang Ma

Abstract Modern dielectric tools are often run to obtain fundamental formation properties, such as remaining oil saturation, water-filled porosity, and brine salinity. Techniques to extract more challenging reservoir petrophysical properties like Archie m and n parameters are also emerging. The accuracy and representativeness of the obtained petrophysical parameters depend on the input parameter accuracy, such as matrix permittivity. In carbonates, matrix permittivity is known to vary over a wide range, for example, limestone matrix permittivity reported in the literature ranges from 7.5 to 9.2. The main objective of the current study is to reduce matrix dielectric permittivity uncertainty for enhanced formation evaluation in carbonate reservoirs. All dielectric measurements were conducted on 1.5 in. carbonate plug samples by means of a coaxial reflection probe with a range of frequency between 10 MHz and 1 GHz. To calculate matrix mineral dielectric permittivity, sample porosity must be obtained. Stress-corrected helium porosity from routine core analysis is used and samples mineralogy and chemical composition are measured by X-Ray diffraction. Dielectric system calibration is done by utilizing several well-characterized standards with known dielectric properties. Calcite and dolomite matrix permittivity are assessed by laboratory measurements. Results of this study and based on data from 180 core plugs allowed to assess the validity of the defined errors by statistical analysis, resulting in much reduced uncertainties in carbonate rock matrix dielectric permittivity; thus enhancing formation evaluation using dielectric measurements. The current study provides better control on dielectric permittivity values used in dielectric log interpretation for limestone formations. Such knowledge will provide better confidence in interpreted data such as water-filled porosity, flushed zone salinity and water phase tortuosity.


2021 ◽  
Author(s):  
Hang Su ◽  
Fujian Zhou ◽  
Lida Wang ◽  
Chuan Wang ◽  
Lixia Kang ◽  
...  

Abstract For reservoirs containing oil with a high total acid number, alkali-cosolvent-polymer (ACP) flood can potentially increase the oil recovery by its saponification effects. The enhanced oil recovery performance of ACP flood has been studied at core and reservoir scale in detail, however, the effect of ACP flood on residual oil saturation in the swept area still lacks enough research. Medical computed tomography (Medical-CT) scan and micro computed tomography (Micro-CT) scan are used in combination to visualize micro-scale flow and reveal the mechanisms of residual oil reduction during ACP flood. The heterogeneous cores containing two layers of different permeability are used for coreflood experiment to clarify the enhanced oil recovery (EOR) performance of ACP food in heterogeneous reservoirs. The oil saturation is monitored by Medical-CT. Then, two core samples are drilled in each core after flooding and the decrease of residual oil saturation caused by ACP flood is further quantified by Micro-CT imageing. Results show that ACP flood is 14.5% oil recovery higher than alkaline-cosolvent (AC) flood (68.9%) in high permeability layers, 17.9% higher than AC flood (26.3%) in low permeability layers. Compared with AC flood, ACP flood shows a more uniform displacement front, which implies that the injected polymer effectively weakened the viscosity fingering. Moreover, a method that can calculate the ratio of oil-water distribution in each pore is developed to establish the relationship between the residual oil saturation of each pore and its pore size, and reached the conclusion that they follow the power law correlation.


2021 ◽  
Author(s):  
Rabab Al Saffar ◽  
Michael Dowen

Abstract The Bahrain Field (the "Field"), discovered in 1932, is an asymmetric anticline trending in a North-South direction of the Kingdom of Bahrain. It is a geologically complex field with 16 multi-stack carbonate and sandstone reservoirs, most of them oil bearing. The fluids varying from shallow tarry oil in Aruma to dry gas in the Khuff and pre-Khuff reservoirs. The Field has more than 2000 wells of which 90% have good quality log data. The Ostracod and Magwa reservoirs are heterogeneous, layered tight reservoirs and have been on production since 1964. The Ostracod reservoir consists of very heterogeneous with limestone intervals intercalated between shale layers, with a total thickness of around 200 ft. The Magwa reservoir conformably underlies the Ostracod reservoir. The Ostracod averages 120 ft in thickness and is dominated by limestone with high porosity, low permeability, and variable water saturations. Core derived permeability measurements are usually less than 5 mD and porosities average 22%. Production performance of individual wells is extremely variable and in many cases appears to be at odds with log-calculated saturations. Wells having good oil saturation often produce water and wells with low oil saturation produce high volumes of oil. Several studies have been conducted in an attempt to understand and resolve this. The variability of oil saturation which has been mapped both laterally across the Field and vertically within wells, led to the question of what caused the variation in oil saturation. The variation is not a function of depth, which one might expect. Causes might include oil failure to migrate into certain reservoir compartments, a loss of the original charge to shallower reservoir or the oil charge been restricted by rock quality. This paper attempts to address the variability in saturations seen across the Field and link known productivity to the Petrophysical interpretations. Nuclear Magnetic Resonance (NMR) logs had been employed in a targeted area of the Field in order to investigate rock quality in an attempt to explain the oil saturation distribution. A small NMR core study was undertaken in order to calibrate the NMR log response. The NMR data had been initially processed with what was considered a representative cut-off for Middle East Carbaonte rocks. This core study resulted in a surprisingly low series of T2 cut-off. The NMR logs were reprocessed with the more representative T2 cut-off. The resulting bound and free fluid fractions seemed to explain the observed well production.


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Ruijie Huang ◽  
Chenji Wei ◽  
Jian Yang ◽  
Xin Xu ◽  
Baozhu Li ◽  
...  

With the high-speed development of artificial intelligence, machine learning methods have become key technologies for intelligent exploration, development, and production in oil and gas fields. This article presents a workflow analysing the main controlling factors of oil saturation variation utilizing machine learning algorithms based on static and dynamic data from actual reservoirs. The dataset in this study generated from 468 wells includes thickness, permeability, porosity, net-to-gross (NTG) ratio, oil production variation (OPV), water production variation (WPV), water cut variation (WCV), neighbouring liquid production variation (NLPV), neighbouring water injection variation (NWIV), and oil saturation variation (OSV). A data processing workflow has been implemented to replace outliers and to increase model accuracy. A total of 10 machine learning algorithms are tested and compared in the dataset. Random forest (RF) and gradient boosting (GBT) are optimal and selected to conduct quantitative analysis of the main controlling factors. Analysis results show that NWIV is the variable with the highest degree of impact on OSV; impact factor is 0.276. Optimization measures are proposed for the development of this kind of sandstone reservoir based on main controlling factor analysis. This study proposes a reference case for oil saturation quantitative analysis based on machine learning methods that will help reservoir engineers make better decision.


2021 ◽  
Author(s):  
Mikhail Bondar ◽  
Andrey Osipov ◽  
Andrey Groman ◽  
Igor Koltsov ◽  
Georgy Shcherbakov ◽  
...  

Abstract EOR technologies in general and surfactant-polymer flooding (SP) in particular is considered as a tertiary method for redevelopment of mature oil fields in Western Siberia, with potential to increase oil recovery to 60-70% OOIP. The selection of effective surfactant blend and a polymer for SP flooding a complex and multi-stage process. The selected SP compositions were tested at Kholmogorskoye oilfield in September-December 2020. Two single well tests with partitioning chemical tracers (SWCTT) and the injectivity test were performed. The surfactant and the polymer for chemical EOR were selecting during laboratory studies. Thermal stability, phase behavior, interfacial tension and rheology of SP formulation were investigated, then a prospective chemical design was developed. Filtration experiments were carried out for optimization of slugs and concentrations. Then SWCTT was used to evaluated residual oil saturation after water flooding and after implementation of chemical EOR in the near wellbore areas. The difference between the obtained values is a measure of the efficiency of surfactant-polymer flooding. Pandemic restriction shifted SWCTT to the period when temperature dropped below zero and suitable for winter conditions equipment was required. Two SWCTT were conducted with same surfactant, but different design of slugs in order to prove technical and economic models of SP-flooding. Long-term polymer injectivity was accessed at the third well. Oil saturation of sandstone reservoir after the injection of a surfactant-polymer solution was reduced about 10% points which is around one third of the residual oil after water flooding. Results were compared with other available data such as well logging, lab core flooding experiments, and hydrodynamic simulation. Modeling of SWCTT is ongoing, current interpretation confirms the increase the oil recovery factor after SP-flooding up to 20-25%, which is a promising result. Temperature model of the bottom hole zone was created and verified. The model predicts that temperature of those zones essentially below that average in the reservoir, which is important for interpretation of tracer test and surfactant efficiency. The tested surfactant showed an acceptable efficiency at under-optimum conditions, which is favorable for application of the SP formulation for neighboring field and layers with different reservoir temperatures, but similar water composition. In general, the results of the conducted field tests correlate with the results of the core experiments for the selected surfactant


2021 ◽  
Author(s):  
Ahmad Khanifar ◽  
Benayad Nourreddine ◽  
Mohd Razib Bin Abd Raub ◽  
Raj Deo Tewari ◽  
Mohd Faizal Bin Sedaralit

Abstract A major Malaysian offshore oilfield, which is currently operating under waterflooding for a quite long time and declining in oil production, plan to convert as chemical enhanced oil recovery (CEOR) injection. The CEOR journey started since the first oil production in year 2000 and proximate waterflooding, with research and development in determining suitable method, encouraging field trial results and a series of field development plans to maximize potential recovery above waterflooding and prolong the production field life. A comprehensive EOR study including screening, laboratory tests, pilot evaluation, and full field reservoir simulation modelling are conducted to reduce the project risks prior to the full field investment and execution. Among several EOR techniques, Alkaline-Surfactant (AS) flooding is chosen to be implemented in this field. Several CEOR key parameters have been studied and optimized in the laboratory such as chemical concentration, chemical adsorption, interfacial tension (IFT), slug size, residual oil saturation (Sor) reduction, thermal stability, flow assurance, emulsion, dilution, and a chemical injection scheme. Uncertainty analysis on CEOR process was done due to the large well spacing in the offshore environment as compared to other CEOR projects, which are onshore with shorter well spacing. The key risks and parameters such as residual oil saturation (Sorw), adsorption and interfacial tension (IFT) cut-off in the dynamic chemical simulator have been investigated via a probabilistic approach on top of deterministic method. The laboratory results from fluid-fluid and rock-fluid analyses ascertained a potential of ultra-low interfacial tension of 0.001 dyne/cm with adsorption of 0.30 mg/gr-of-rock, which translated to a 50-75% reduction in Sor after waterflooding. The results of four single well chemical tracer tests (SWCTT) on two wells validated the effectiveness of the Alkaline Surfactant by a reduction of 50-80% in Sor. The most suitable chemical formulation was found 1.0 wt. % Alkali and 0.075 wt. % Surfactant. The field trial results were thenceforth upscaled to a dynamic chemical simulation; from single well to full field modeling, resulting an optimal chemical injection of three years or almost 0.2 effective injection pore volume, coupled with six months of low salinity treated water as pre-flush and post-flush injection. The latest field development study results yield a technical potential recoverable volume of 14, 16, and 26 MMstb (above waterflooding) for low, most likely, and high cases, respectively, which translated to an additional EOR recovery factor up to 5.6 % for most-likely case by end of technical field life. Prior to the final investment decision stage, Petronas’ position was to proceed with the project based on the techno-commerciality and associated risks as per milestone review 5, albeit it came to an agreement to have differing interpretations towards the technical basis of the project in the final steering committee. Subsequently, due to the eventual plunging global crude oil price, the project was then reprioritized and adjourned correspondingly within Petronas’ upstream portfolio management. Further phased development including a producing pilot has been debated with the main objective to address key technical and business uncertainties and risks associated with applying CEOR process.


2021 ◽  
Author(s):  
Amaar Siyal ◽  
Khurshed Rahimov ◽  
Waleed AlAmeri ◽  
Emad W. Al-Shalabi

Abstract Different enhanced oil recovery (EOR) methods are usually applied to target remaining oil saturation in a reservoir after both conventional primary and secondary recovery stages. The remaining oil in the reservoir is classified into capillary trapped residual oil and unswept /bypassed oil. Mobilizing the residual oil in the reservoir is usually achieved through either decreasing the capillary forces and/or increasing the viscous or gravitational forces. The recovery of the microscopically trapped residual oil is mainly studied using capillary desaturation curve (CDC). Hence, a fundamental understanding of the CDC is needed for optimizing the design and application of different EOR methods in both sandstone and carbonate reservoirs. For sandstone reservoirs, especially water-water rocks, determining the residual oil saturation and generating CDC has been widely studied and documented in literature. On the other hand, very few studies have been conducted on carbonate rocks and less data is available. Therefore, this paper provides a comprehensive review of several important research studies published on CDC over the past few decades for both sandstone and carbonate reservoirs. We critically analyzed and discussed theses CDC studies based on capillary number, Bond number, and trapping number ranges. The effect of different factors on CDC were further investigated including interfacial tension, heterogeneity, permeability, and wettability. This comparative review shows that capillary desaturation curves in carbonates are shallower as opposed to these in sandstones. This is due to different factors such as the presence of high fracture density, presence of micropores, large pore size distribution, mixed-to-oil wetting nature, high permeability, and heterogeneity. In general, the critical capillary number reported in literature for sandstone rocks is in the range of 10−5 to 10−2. However, for carbonate rocks, that number ranges between 10−8 and 10−5. In addition, the wettability has been shown to have a major effect on the shape of CDC in both sandstone and carbonate rocks; different CDCs have been reported for water-wet, mixed-wet, and oil-wet rocks. The CDC shape is broader and the capillary number values are higher in oil-wet rocks compared to mixed-wet and water-wet rocks. This study provides a comprehensive and comparative analysis of CDC in both sandstone and carbonate rocks, which serves as a guide in understanding different CDCs and hence, better screening of different EOR methods for different types of reservoirs.


Sign in / Sign up

Export Citation Format

Share Document