Large Eddy Simulation of Three-Dimensional High Speed Aerodynamics Flows

2000 ◽  
Author(s):  
Doyle Knight ◽  
Hong Yan
Keyword(s):  
Large Eddy Simulation ◽  
High Speed ◽  
Three Dimensional ◽  
Eddy Simulation ◽  
Large Eddy

Large Eddy Simulation (LES) and Time-Resolved Particle Image Velocimetry (TR-PIV) in the Wake of a Cavitating Hydrofoil

2005 ◽  
Author(s):  
Martin Wosnik ◽  
Qiao Qin ◽  
Damien T. Kawakami ◽  
Roger E. A. Arndt
Keyword(s):  
Particle Image Velocimetry ◽  
Large Eddy Simulation ◽  
High Speed ◽  
Particle Image ◽  
Three Dimensional ◽  
Pair Type ◽  
Time Resolved ◽  
Eddy Simulation ◽  
Image Velocimetry ◽  
Large Eddy

A Large Eddy Simulation (LES) approach for cavitating flow, based on a virtual single-phase, fully compressible cavitation model which includes the effects of incondensable gas, has been shown to be capable of capturing the complex dynamical features of highly unsteady cavitating flows of two-dimensional hydrofoils. Here the LES results are compared to Time-Resolved Particle Image Velocimetry (TR-PIV) in the wake of a cavitating NACA 0015 hydrofoil, with particular attention to the predicted vortex shedding mechanisms. Despite some difficulty with obtaining vector fields from vortical clouds of vaporous-gaseous bubbles with cross-correlation techniques, the initial results seem promising in that they confirm the existence of a primary vortex pair (type A-B). In addition to TR-PIV, the cavitation cloud shedding was also documented with phase-locked, time-resolved photography and high speed volume-illuminated video, both with simultaneous imaging of side and plan views of the foil. All three experimental techniques confirm the need for fully three-dimensional simulations to properly describe the unsteady, three-dimensional cavitation cloud shedding mechanism.

Large‐Eddy Simulation of Three‐Dimensional Flow Structures Over Wave‐generated Ripples

2021 ◽  
Author(s):  
Chuang Jin ◽  
Giovanni Coco ◽  
Rafael O. Tinoco ◽  
Pallav Ranjan ◽  
Jorge San Juan ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Flow Structures ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Eddy Simulation ◽  
Large Eddy

RANS and Large Eddy Simulation of Internal Combustion Engine Flows—A Comparative Study

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
Xiaofeng Yang ◽  
Saurabh Gupta ◽  
Tang-Wei Kuo ◽  
Venkatesh Gopalakrishnan
Keyword(s):  
Large Eddy Simulation ◽  
High Speed ◽  
Combustion Engine ◽  
Flow Analysis ◽  
Partial Geometry ◽  
Computational Domain ◽  
Mean Flow ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Rans Simulations

A comparative cold flow analysis between Reynolds-averaged Navier–Stokes (RANS) and large eddy simulation (LES) cycle-averaged velocity and turbulence predictions is carried out for a single cylinder engine with a transparent combustion chamber (TCC) under motored conditions using high-speed particle image velocimetry (PIV) measurements as the reference data. Simulations are done using a commercial computationally fluid dynamics (CFD) code CONVERGE with the implementation of standard k-ε and RNG k-ε turbulent models for RANS and a one-equation eddy viscosity model for LES. The following aspects are analyzed in this study: The effects of computational domain geometry (with or without intake and exhaust plenums) on mean flow and turbulence predictions for both LES and RANS simulations. And comparison of LES versus RANS simulations in terms of their capability to predict mean flow and turbulence. Both RANS and LES full and partial geometry simulations are able to capture the overall mean flow trends qualitatively; but the intake jet structure, velocity magnitudes, turbulence magnitudes, and its distribution are more accurately predicted by LES full geometry simulations. The guideline therefore for CFD engineers is that RANS partial geometry simulations (computationally least expensive) with a RNG k-ε turbulent model and one cycle or more are good enough for capturing overall qualitative flow trends for the engineering applications. However, if one is interested in getting reasonably accurate estimates of velocity magnitudes, flow structures, turbulence magnitudes, and its distribution, they must resort to LES simulations. Furthermore, to get the most accurate turbulence distributions, one must consider running LES full geometry simulations.

Large Eddy Simulation of Cross Flow in Pipe Junction

2018 ◽  
Author(s):  
Jiajun Chen ◽  
Yue Sun ◽  
Hang Zhang ◽  
Dakui Feng ◽  
Zhiguo Zhang
Keyword(s):  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cross Flow ◽  
Exciting Force ◽  
Navier Stokes ◽  
Pipe Network ◽  
Eddy Simulation ◽  
Large Eddy

Mixing in pipe junctions can play an important role in exciting force and distribution of flow in pipe network. This paper investigated the cross pipe junction and proposed an improved plan, Y-shaped pipe junction. The numerical study of a three-dimensional pipe junction was performed for calculation and improved understanding of flow feature in pipe. The filtered Navier–Stokes equations were used to perform the large-eddy simulation of the unsteady incompressible flow in pipe. From the analysis of these results, it clearly appears that the vortex strength and velocity non-uniformity of centerline, can be reduced by Y-shaped junction. The Y-shaped junction not only has better flow characteristic, but also reduces head loss and exciting force. The results of the three-dimensional improvement analysis of junction can be used in the design of pipe network for industry.

Large eddy simulation of stratified mixing in a three-dimensional lock-exchange system

2009 ◽  
Vol 26 (3-4) ◽  
pp. 134-155 ◽  
Author(s):  
Tamay M. Özgökmen ◽  
Traian Iliescu ◽  
Paul F. Fischer
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Exchange System ◽  
Eddy Simulation ◽  
Large Eddy
Sign in / Sign up

Export Citation Format

Share Document