scholarly journals Simplified Fixed Technique for Correction of Anterior Crossbite: A Case Series

2021 ◽  
Vol 16 (1) ◽  
pp. 77-85
Author(s):  
Nik Mukhriz Nik Mustapha ◽  
Asma Ashari
Keyword(s):  
Early Intervention ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
Case Series ◽  
Nickel Titanium ◽  
Glass Ionomer ◽  
Short Span ◽  
Functional Shift ◽  
Ionomer Cement

Anterior crossbites would normally require early intervention, especially when associated with mandibular displacements. The intervention would usually commence in children around the age of eight and nine, where treatment could be a challenge at this age. Therefore, a simple and quick treatment to this malocclusion would be desirable. This case series illustrates two cases of anterior crossbite with a functional shift that were successfully corrected using a simplified fixed technique, which involved a short-span nickel-titanium (Ni-Ti) aligning round archwire, composite resin and glass ionomer cement (GIC).

scholarly journals Modified Technique of Porcelain Laminate Veneer in Premolars with Abfraction Lesions: Three-Dimensional Finite Element Analysis (FEA)

2020 ◽  
Vol 22 (2) ◽  
pp. 120-126
Author(s):  
Larissa Marcia Martins Alves ◽  
Lisseth Patricia Claudio Contreras ◽  
João Paulo Mendes Tribst ◽  
Renata Marques de Melo ◽  
Alexandre Luiz Souto Borges
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
Three Dimensional ◽  
Glass Ionomer ◽  
Element Analysis ◽  
3D Fea ◽  
Laminate Veneers ◽  
Ionomer Cement

The incidence of non-carious cervical lesions (NCCLs) has increased as populations are aging, and teeth are increasingly retained for life. Several materials are available to treat these lesions. This study aimed to evaluate the stress distribution of maxillary premolars with NCCLs using three-dimensional (3D) finite element analysis (FEA) according to different restorative techniques. A 3D FEA mathematical model simulating a sound premolar was initially modeled and replicated in 6 more models simulating a tooth with abfraction: G.1 tooth with abfraction; G.2 tooth with abfraction + composite resin restoration; G.3 tooth with abfraction + glass-ionomer cement restoration; G.4 tooth with abfraction + resin composite restoration + porcelain laminate veneers; G.5 tooth with abfraction + glass-ionomer cement + porcelain laminate veneers; and G.6 modified porcelain laminate veneers filling the lesion. All materials and structures were considered linear, elastic, homogeneous and isotropic and the results were expressed as maximum principal stress. Lower stress concentration in dentin was calculated when the tooth was restored with composite resin and glass-ionomer cement. Regarding the veneer techniques, no difference was found to dentin stress among the groups, but the modified veneer concentrated less stress in the restoration than other the techniques. The control group had the highest concentration of stress in the lesion. All techniques decreased the stress concentration inside the NCCLs and the indirect veneer filling the lesion presented better biomechanical behavior than the veneer cemented above direct restorations.  Keywords: Finite Element Analysis. Dental Veneers. Ceramics. Bicuspid. Resumo A incidência de lesões cervicais não-cariosas (LCNC) tem aumentado, uma vez que a população tem envelhecido com uma menor perda de elementos dentários. Diferentes materiais estão disponíveis para tratar dessas lesões. Este estudo objetivou avaliar a distribuição de tensão de pré-molares superiores com LCNC por meio da análise tridimensional (3D) de elementos finitos (FEA) de acordo com diferentes técnicas restauradoras. Um modelo matemático 3D FEA simulando um pré-molar íntegro foi modelado e replicado em mais 6 modelos simulando um dente com abfração: G.1 dente com abfração; G.2 dente com abfração + resina composta; G.3 dente com abfração + cimento de ionômero de vidro; G.4 dente com abfração + resina composta + faceta; G.5 dente com abfração + cimento de ionômero de vidro + faceta cerâmica e G.6 com faceta cerâmica modificada, preenchendo a lesão. Todos os materiais e estruturas foram considerados lineares, elásticos, homogêneos e isotrópicos e os resultados foram expressos como máxima tensão principal. Menor concentração de tensão na dentina foi calculada quando o dente foi restaurado com resina composta ou cimento de ionômero de vidro. Dentre os grupos com laminados, não houve diferença para a dentina, entretanto a faceta modificada apresentou menor concentração de tensão na restauração. O grupo controle apresentou a maior concentração de tensão na lesão. Todas as técnicas restauradoras diminuíram a concentração de tensão no interior das LCNCs e dentre as técnicas com laminados a faceta modificada apresentou o melhor comportamento biomecânico. Palavras-chave: Análise de Elementos Finitos. Facetas Dentárias. Cerâmica. Dente Pré-Molar.

scholarly journals Apexogenesis of traumatized maxillary right central incisor: Case report with 4years follow up

2019 ◽  
Vol 7 (1) ◽  
pp. 8
Author(s):  
Mohammad Hammo DDS ◽  
Mazen Doumani DDS. MSc. ◽  
Adnan Habib DDS. MSc. PhD
Keyword(s):  
Composite Resin ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Permanent Teeth ◽  
Glass Ionomer ◽  
Central Incisor ◽  
Vital Pulp Therapy ◽  
Open Apices ◽  
Ionomer Cement

The main goal of vital pulp therapy is to preserve and maintain pulpal health in teeth that have been exposed to caries, trauma, and restorative procedures. This type of endodontic treatment is very important in young permanent teeth that have not reached their complete length and exhibit thin-walled roots and wide open apices. The developments in knowledge of pulpal physiology and immunology, beside to newly introduced dental materials, have changed the treatment approaches for teeth with involved pulps. This report describes a case of a young patient in whom maxillary right central incisor suffered crown fractures because of a traumatic accident. Pulpotomy with MTA were performed in order to achieve apexogenesis and the tooth was restored with a glass ionomer cement and composite resin. The patient was reviewed over 4years. 

Effects of Cyclic Stressing on Attachment Bond Strength using Glass Ionomer Cement and Composite Resin

1995 ◽  
Vol 22 (1) ◽  
pp. 23-27 ◽  
Author(s):  
H. C. Moseley ◽  
E. N. Horrocks ◽  
G. J. Pearson ◽  
E. H. Davies
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement

A Fluoride-containing Composite Resin—An In Vitro Study of a New Material for Orthodontic Bonding

1989 ◽  
Vol 16 (3) ◽  
pp. 207-212 ◽  
Author(s):  
P. A. Cook ◽  
C. C. Youngson
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
The Other ◽  
Glass Ionomer ◽  
New Material ◽  
Bond Strengths ◽  
Ionomer Cement

The shear/peel bond strength of a new material, a ‘hybrid’ of a composite resin and a glass ionomer cement, was compared in vitro with the bond strengths of a composite resin and of a glass ionomer cement. The new material had a significantly greater bond strength than the other materials tested and its properties were very similar to the composite resin. Unlike the glass ionomer cement, etching of the enamel before applying the adhesive is required. The clinical indications for using this new cement are discussed.

Influence of oral fluid on composite resin and glass-ionomer cement

1984 ◽  
Vol 52 (2) ◽  
pp. 182-189 ◽  
Author(s):  
Jean-Franç¸ois Roulet ◽  
Christian Wa¨lti
Keyword(s):  
Oral Fluid ◽  
Composite Resin ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement
Sign in / Sign up

Export Citation Format

Share Document