A High Mach Number Turbulent Boundary-Layer Study

AIAA Journal ◽  
1976 ◽  
Vol 14 (9) ◽  
pp. 1159-1160 ◽  
Author(s):  
E. Backx ◽  
B.E. Richards
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Turbulent Boundary Layer ◽  
High Mach Number ◽  
High Mach

Optical refraction from high Mach number turbulent boundary layer structures

1998 ◽  
Author(s):  
P. Erbland ◽  
M. Etz ◽  
W. Lempert ◽  
A. Smits ◽  
R. Miles
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Turbulent Boundary Layer ◽  
High Mach Number ◽  
Optical Refraction ◽  
Layer Structures ◽  
High Mach

Investigation of the stability characteristics of a compressible boundary layer on a flat plate at high mach number

1992 ◽  
Vol 33 (5) ◽  
pp. 653-657 ◽  
Author(s):  
S. E. Grubin ◽  
I. N. Simakin ◽  
V. N. Trigub
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Flat Plate ◽  
Compressible Boundary Layer ◽  
High Mach Number ◽  
High Mach ◽  
The Stability

Comparison of Boundary Layer Similarity Transformations for High Mach Number Flows

2019 ◽  
Author(s):  
Nicholas J. DiGregorio ◽  
Tomasz G. Drozda ◽  
Cyrus K. Madnia
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
High Mach Number ◽  
Similarity Transformations ◽  
High Mach

scholarly journals Influence of surface sublimation on boundary layer stability at high Mach number

2019 ◽  
Vol 1404 ◽  
pp. 012079
Author(s):  
S A Gaponov ◽  
A N Semenov ◽  
B V Smorodsky
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Boundary Layer Stability ◽  
High Mach Number ◽  
High Mach

scholarly journals Instability wave–streak interactions in a high Mach number boundary layer at flight conditions

2018 ◽  
Vol 858 ◽  
pp. 474-499 ◽  
Author(s):  
Pedro Paredes ◽  
Meelan M. Choudhari ◽  
Fei Li
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Instability Wave ◽  
Instability Waves ◽  
High Mach Number ◽  
Layer Flow ◽  
High Mach ◽  
Optimal Disturbances

The interaction of stationary streaks undergoing non-modal growth with modally unstable instability waves in a high Mach number boundary-layer flow is studied using numerical computations. The geometry and flow conditions are selected to match a relevant trajectory location from the ascent phase of the HIFiRE-1 flight experiment; namely, a $7^{\circ }$ half-angle, circular cone with $2.5$ mm nose radius, free-stream Mach number equal to $5.30$, unit Reynolds number equal to $13.42~\text{m}^{-1}$ and wall-to-adiabatic temperature ratio of approximately $0.35$ over most of the vehicle. This paper investigates the nonlinear evolution of initially linear optimal disturbances that evolve into finite-amplitude streaks, followed by an analysis of the modal instability characteristics of the perturbed, streaky boundary-layer flow. The investigation is performed with a stationary, full Navier–Stokes equations solver and the plane-marching parabolized stability equations (PSE), in conjunction with partial-differential-equation-based planar eigenvalue analysis. The overall effect of streaks is to reduce the peak amplification factors of instability waves, indicating a possible downstream shift in the onset of laminar–turbulent transition. The present study confirms previous findings that the mean-flow distortion of the nonlinear streak perturbation reduces the amplification rates of the Mack-mode instability. More importantly, however, the present results demonstrate that the spanwise varying component of the streak can produce a larger effect on the Mack-mode amplification. The analysis of planar and oblique Mack-mode waves modulated by the presence of the streaks shows that the planar Mack mode still dominates the instability characteristics of the flow. The study with selected azimuthal wavenumbers for the stationary streaks reveals that a wavenumber of approximately $1.4$ times larger than the optimal wavenumber is more effective in stabilizing the planar Mack-mode instabilities. In the absence of unstable first-mode waves for the present cold-wall condition, transition onset is expected to be delayed until the peak streak amplitude increases to nearly 35 % of the free-stream velocity, when intrinsic instabilities of the boundary-layer streaks begin to dominate the transition process. For streak amplitudes below that limit a significant net stabilization is achieved, yielding a potential transition delay that can exceed 100 % of the length of the laminar region in the uncontrolled case.

Passive control of oblique shock/boundary layer interaction at high Mach number

2000 ◽  
Author(s):  
V. Borovoy ◽  
V. Gusev ◽  
A. Skuratov ◽  
E. Stolyarov ◽  
J. Delery ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Passive Control ◽  
Oblique Shock ◽  
Layer Interaction ◽  
High Mach Number ◽  
Shock Boundary Layer Interaction ◽  
Boundary Layer Interaction ◽  
High Mach

An unseeded air MHD accelerator concept for high Mach number hypersonic propulsion testing

1989 ◽  
Author(s):  
GLOYD SIMMONS ◽  
GORDON NELSON ◽  
ROBERT HIERS ◽  
ARTHURB. WESTERN
Keyword(s):  
Mach Number ◽  
Hypersonic Propulsion ◽  
High Mach Number ◽  
High Mach
Sign in / Sign up

Export Citation Format

Share Document