Our paper presents an improved numerical scheme to simulate Single Well Chemical Tracer Test (SWCTT) method. SWCTT is mainly applied to determine the residual oil saturation of reservoirs. It consists in injecting an aqueous slug of a primary tracer into the reservoir formation and displacing it at a certain distance from the well. This tracer is partly miscible with oil on the one hand, and generates in situ a secondary tracer on the other hand. As a consequence, a shift is observed between the primary and the secondary tracers arrival times when production is resumed. This time shift is used to evaluate the residual oil saturation. In our paper, we propose a numerical scheme based on a fractional time stepping technique to decouple the resolution of the phases mass conservation equations and the chemical tracers mole conservation equations. For the phases resolution, we use an implicit scheme to ensure stability and robustness. For the chemical tracers, we propose an explicit second-order scheme in time and in space via MUSCL technique to improve the tracers time-shift calculation. The proposed numerical method is implemented on a realistic simulation model consisting of a vertical well crossing a reservoir consisting of a stack of homogeneous layers. By reducing the numerical dispersion, the proposed scheme improves the accuracy of predicted concentration profiles, without significantly increasing the computation time. Finally, the advantages of using a second-order scheme for residual oil saturation assessment are discussed on the basis of a radial 1D mesh convergence study.
MUSCL scheme for Single Well Chemical Tracer Test simulation, design and interpretation
