Sulfur dioxide, carbon disulfide, and hydrogen sulfide are important decomposition products of insulating gas sulfur hexafluoride, and their types and contents are of great significance for the fault diagnosis of SF6 insulated equipment. In this paper, a method of combining ultraviolet absorption spectroscopy and least squares fitting is proposed for the quantitative calculation of sulfur dioxide, carbon disulfide, and hydrogen sulfide mixed gases. All three gases have absorption peaks in the ultraviolet band and they overlap with each other which makes it hard to determinate the concentrations of the three gases directly. During the experiment, we found that high concentrations of sulfur dioxide and carbon disulfide interfered with the hydrogen sulfide calculation and the magnitude of this interference was positively correlated with these two gas concentrations. Therefore, we found a modified equation for the correction of hydrogen sulfide. Combined with this equation, accurate quantitative detection of three gases can be achieved. The detection ranges are 0.5–10 parts per million for sulfur dioxide and hydrogen sulfide, and 10–300 parts per billion for carbon disulfide. This paper provides a simple and efficient detection method, which is convenient for integration into detection equipment and it provides a support method for the diagnosis of sulfur hexafluoride decomposition gases.
Biological removal of gaseous sulfur dioxide through the reduction to hydrogen sulfide by means of Desulfovibrio desulfuricans
