CERROLOW-117 Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Dental Models ◽  
Metal Products

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.

CERROLOW-147 Alloy

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Freezing Range ◽  
Lower Melting ◽  
Metal Products ◽  
Lower Melting Temperature

Abstract CERROLOW-147 Alloy is a bismuth-base non-eutectic alloy that melts over the narrow, low-temperature range of 142-149 F (61-65 C). It has a slightly lower melting temperature than CERROBEND Alloy (Alloy Digest Bi-6, August 1978) and functions about as well for the same uses if its small freezing range is not objectionable. Cerrolow-147 Alloy provides engineers and technicians with an easily castable material that is ready for use as soon as it freezes. It is highly suitable in industry for such uses as anchoring parts for machining and support for bending tubing and extrusions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-21. Producer or source: Cerro Metal Products.

CERROMATRIX Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Metal Products

Abstract CERROMATRIX Alloy is a bismuth-base non-eutectic alloy that melts over the low temperature range of 218-440 F. Its low melting temperature and controlled-shrinkage characteristics make it a valuable tool of industry for such operations as anchoring punches in dies, repairing broken dies and filling blow holes in castings. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-4. Producer or source: Cerro Metal Products.

CERROLOW-136 Alloy

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Metal Products

Abstract CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.

CERROCAST Alloy

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Melting Range ◽  
Spray Painting ◽  
Metal Products ◽  
Temperature Work

Abstract CERROCAST Alloy is a non-eutectic alloy with a melting range from 281 F to 338 F. It provides manufacturing engineers with an easily castable material that is ready for use soon after it freezes; moreover, it can be recovered readily and recycled into new uses any number of times. Cerrocast alloy is used widely for spray molding techniques, for sealing and soldering in low-temperature work, for proof casting in foundries and for masks in spray painting and electroplating. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Sn-9. Producer or source: Cerro Metal Products.

INDALLOY 117

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices

Abstract INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.

CERROBEND Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Tube Bending ◽  
Metal Products

Abstract CERROBEND Alloy is a bismuth-base eutectic alloy that melts at 158 F (70 C). It is low melting temperature and controlled-shrinkage characteristics make it highly useful industry for such applications as anchoring bushings in drill jigs, cores for spinning and tube-bending filler. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-6. Producer or source: Cerro Metal Products.

BISMUTH-28.5Pb-14.5Sn-9Sb

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Sheet Steel ◽  
Heat Treating ◽  
Temperature Range ◽  
Silicon Sheet

Abstract Bismuth-28.5Pb-14.5Sn-9Sb is a bismuth-base non-eutectic alloy that melts over the low-temperature range of 218-440 F. Its controlled-shrinkage characteristics and low melting temperature make it a valuable industrial tool. It was developed and used originally for making punching dies to produce transformer laminations from silicon sheet steel. Now its many uses include filling blow holes in castings, anchoring dies and non-machinery parts, fixtures, jigs and hold-down bolts in concrete floors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-30. Producer or source: Producers of low-melting alloys.

OSTALLOY 117

Alloy Digest ◽  
1980 ◽  
Vol 29 (4) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Heat Treating ◽  
Dental Models

Abstract OSTALLOY 117 is a eutectic, controlled-shrinkage alloy that melts at 117 F. It provides the engineer, scientist and technician with easily castable material that is ready for use soon after it freezes. It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it highly useful for such applications as low-temperature solder, proof casting of cavities and dental models. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-16. Producer or source: Arconium Corporation of America, A.J Oster Company.

OSTALLOY 136

Alloy Digest ◽  
1982 ◽  
Vol 31 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices ◽  
Dental Models

Abstract OSTALLOY 136 is a bismuth-base, low-melting eutectic alloy; it melts at 136 F (57.8 C), hence its identifying number. This alloy finds wide use in industry and in laboratories because of its low melting temperature and controlled-shrinkage characteristics. It can be recovered easily and recycled into new uses any number of times. Among many applications Ostalloy 136 is used for anchoring components for machining and grinding, proof casting in foundries, dental models and fusible elements in safety devices. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-28. Producer or source: Arconium Corporation of America, A.J Oster Company.

INDALLOY 136

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating

Abstract INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.

Sign in / Sign up

Export Citation Format

Share Document