INDALLOY 117

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices

Abstract INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.

INDALLOY 158

Alloy Digest ◽  
1982 ◽  
Vol 31 (1) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Fire Safety ◽  
Heat Treating ◽  
Safety Devices

Abstract INDALLOY 158 is a bismuth-base, eutectic alloy that has a melting point of 158 F (70 C). It is an easily castable material that is ready for use as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-27. Producer or source: Indium Corporation of America.

OSTALLOY 281

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Safety Devices

Abstract OSTALLOY 281 is a bismuth-base eutectic alloy. Its melting temperature is 281 F (138 C); this is the highest melting point of the bismuth-base alloys commonly used in industry. It provides an easily castable material ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include holding jet engine blades for machining, foundry patterns and fusible elements in safety devices. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-17. Producer or source: Arconium Corporation of America, A.J Oster Company.

BISMUTH-26.7Pb-13.3Sn-10Cd

Alloy Digest ◽  
1983 ◽  
Vol 32 (10) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Fire Safety ◽  
Heat Treating ◽  
Safety Devices

Abstract Bismuth-26.7Pb-13.3Sn-10Cd is a bismuth-base, eutectic alloy that is melted and cast easily and is ready for use as soon as it freezes. It has a melting point of 158 F (70 C). It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-32. Producer or source: Producers of low-melting alloys.

CERROLOW-117 Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Dental Models ◽  
Metal Products

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.

CERROLOW-147 Alloy

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Freezing Range ◽  
Lower Melting ◽  
Metal Products ◽  
Lower Melting Temperature

Abstract CERROLOW-147 Alloy is a bismuth-base non-eutectic alloy that melts over the narrow, low-temperature range of 142-149 F (61-65 C). It has a slightly lower melting temperature than CERROBEND Alloy (Alloy Digest Bi-6, August 1978) and functions about as well for the same uses if its small freezing range is not objectionable. Cerrolow-147 Alloy provides engineers and technicians with an easily castable material that is ready for use as soon as it freezes. It is highly suitable in industry for such uses as anchoring parts for machining and support for bending tubing and extrusions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-21. Producer or source: Cerro Metal Products.

BISMUTH-28.5Pb-14.5Sn-9Sb

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Sheet Steel ◽  
Heat Treating ◽  
Temperature Range ◽  
Silicon Sheet

Abstract Bismuth-28.5Pb-14.5Sn-9Sb is a bismuth-base non-eutectic alloy that melts over the low-temperature range of 218-440 F. Its controlled-shrinkage characteristics and low melting temperature make it a valuable industrial tool. It was developed and used originally for making punching dies to produce transformer laminations from silicon sheet steel. Now its many uses include filling blow holes in castings, anchoring dies and non-machinery parts, fixtures, jigs and hold-down bolts in concrete floors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-30. Producer or source: Producers of low-melting alloys.

INDALLOY 281

Alloy Digest ◽  
1982 ◽  
Vol 31 (9) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating

Abstract INDALLOY 281 is a bismuth-base eutectic alloy; it has a melting temperature of 281 F (138 C). This is the highest melting point of the bismuth alloys commonly used in industry. Indalloy 281 furnishes scientists, engineers and technicians with an easily castable alloy that is ready for use soon after it freezes. It can be recovered easily and recycled many times. Among its many uses are anchoring parts for machining, foundry patterns and liquid seals. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-29. Producer or source: Indium Corporation of America.

CERROMATRIX Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Metal Products

Abstract CERROMATRIX Alloy is a bismuth-base non-eutectic alloy that melts over the low temperature range of 218-440 F. Its low melting temperature and controlled-shrinkage characteristics make it a valuable tool of industry for such operations as anchoring punches in dies, repairing broken dies and filling blow holes in castings. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-4. Producer or source: Cerro Metal Products.

BISMUTH-22.6Pb-19.1In-8.3Sn-5.3Cd

Alloy Digest ◽  
1984 ◽  
Vol 33 (6) ◽  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Safety Devices

Abstract Bismuth-22.6Pb-19.1In-8.3Sn-5.3Cd is a eutectic, controlled-shrinkage alloy that has a melting point of 117 F (47 C). It provides the engineer, scientist and technician with easily castable material that is ready for use soon after it freezes. This alloy can be recycled into new uses any number of times. Its many uses include fusible elements in safety devices, model railroading, low-temperature solder and proof casting. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Bi-36. Producer or source: Producers of low-melting alloys.

OSTALLOY 136

Alloy Digest ◽  
1982 ◽  
Vol 31 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices ◽  
Dental Models

Abstract OSTALLOY 136 is a bismuth-base, low-melting eutectic alloy; it melts at 136 F (57.8 C), hence its identifying number. This alloy finds wide use in industry and in laboratories because of its low melting temperature and controlled-shrinkage characteristics. It can be recovered easily and recycled into new uses any number of times. Among many applications Ostalloy 136 is used for anchoring components for machining and grinding, proof casting in foundries, dental models and fusible elements in safety devices. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-28. Producer or source: Arconium Corporation of America, A.J Oster Company.

Sign in / Sign up

Export Citation Format

Share Document