ADVANCE

Alloy Digest ◽  
1956 ◽  
Vol 5 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Temperature Coefficient Of Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract ADVANCE is a copper-nickel alloy having high electrical resistance, negligible temperature coefficient of resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Cu-40. Producer or source: Driver-Harris Company.

MONEL ALLOY 401

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Heat Treating ◽  
High Electrical Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract MONEL alloy 401 is a copper-nickel alloy with high electrical resistance and is used primarily in specialized electrical and electronic applications. It has a negligible temperature coefficient of electrical resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-216. Producer or source: Huntington Alloy Products Division.

DRIVER 60 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Temperature Coefficient Of Resistance ◽  
Copper Nickel Alloy

Abstract DRIVER 60 ALLOY is a copper-nickel alloy for use where fairly low electrical resistance is required. The number designation corresponds to its specific resistivity (60 ohms/cir mil/ft) which is combined with a fairly high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-339. Producer or source: Wilbur B. Driver Company.

DRIVER 30 ALLOY

Alloy Digest ◽  
1977 ◽  
Vol 26 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Temperature Coefficient Of Resistance ◽  
Copper Nickel Alloy

Abstract DRIVER 30 ALLOY is a copper-nickel alloy for use where low electrical resistance is required. The number designation corresponds to its specific resistivity (30 ohms/cir mil/ft) which is combined with a relatively high temperature coefficient of resistance. Its maximum recommended operating temperature is 600 F (316 C). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-337. Producer or source: Wilbur B. Driver Company.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

AA B443.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

TECHALLOY 294

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Wide Range ◽  
Copper Nickel Alloy

Abstract TECHALLOY 294 is a copper-nickel alloy with constant electrical resistance over a wide range of temperatures. It is used widely in rheostats and controls where the maximum operating temperature does not exceed 1000 F. Its low temperature coefficient of electrical resistance and its stability make it highly useful in sizes for instruments and resistors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-301. Producer or source: Techalloy Company Inc..

COPPER ALLOY No. C93700

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Tin Bronze ◽  
Low Strength

Abstract Copper Alloy No. C93700 is a cast bronze with relatively low strength, good machinability and good corrosion resistance. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Ingot No. 305, (3) Bushing and Bearing Bronze and (4) 80-10-10. Its many applications include bearings, bushings, impellers and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-421. Producer or source: Copper alloy foundries.

TECHALLOY A

Alloy Digest ◽  
1975 ◽  
Vol 24 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Temperature Coefficient Of Resistance ◽  
Nickel Chromium ◽  
Resistance Alloy ◽  
Lower Temperature

Abstract TECHALLOY A (80-20) is a nickel-chromium electrical resistance alloy for operating temperatures up to 2150 F. It is non-magnetic, highly corrosion resistance, and has a lower temperature coefficient of resistance than other alloys for heater elements. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-220. Producer or source: Techalloy Company Inc..

ALUMINUM B443.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

ELECTRALLOY TOOLWARE 718

Alloy Digest ◽  
2009 ◽  
Vol 58 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Good Corrosion Resistance ◽  
Nickel Base

Abstract Electralloy Toolware 718 is an age-hardenable nickel-base alloy with high strength and toughness, good corrosion resistance, and good fabricability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-675. Producer or source: Electralloy, a division of G.O. Carlson Inc.

Sign in / Sign up

Export Citation Format

Share Document