BELMONT ALLOY 4977

Alloy Digest ◽  
1977 ◽  
Vol 26 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Good Resistance ◽  
Strength Alloy

Abstract BELMONT ALLOY 4977 is a high-strength alloy for casting. Its high strength is achieved by solution treating and precipitation (age) hardening. It has good resistance to corrosion. This alloy is the most widely used high-strength beryllium-copper casting alloy; among its many uses are valves, pump components and molds for plastics. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-340. Producer or source: Belmont Metals Inc..

BERYLCO 275CR

Alloy Digest ◽  
1956 ◽  
Vol 5 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract Berylco 275CR is a heat treatable beryllium copper casting alloy having high strength and hardness, and excellent corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-35. Producer or source: Beryllium Corporation.

BUNTING ALLOY 954

Alloy Digest ◽  
1977 ◽  
Vol 26 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Cast Alloy ◽  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Heavy Loads

Abstract BUNTING Alloy 954 is a tough cast alloy for heavy loads. It is characterized by high strength, high hardness, good resistance o fatigue and wear, and excellent resistance to corrosion. It is suitable for service temperatures up to 750 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-336. Producer or source: NL Industries Inc., Bearing Division.

AA 355.0

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract AA 355.0 is a general-purpose, high-strength casting alloy containing silicon and copper as the major alloying elements. Its casting characteristics are excellent and it is recommended for pressure-tight castings. It can be age hardened and has good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-291. Producer or source: Various aluminum companies.

COPPER ALLOY No. C82500

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Copper Base ◽  
Hardened Condition

Abstract Copper Alloy No. C82500 is an age-hardenable copper-base casting alloy containing nominally 2% beryllium. It offers high strength, toughness and good resistance to corrosion. It has good fatigue strength in the age-hardened condition. Typical uses include bushings, bearings, valves, cams and safety tools. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-512. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 875

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Copper Base

Abstract Copper Alloy No. 875 is a copper-base casting alloy for applications requiring a combination of high strength and good resistance to corrosion. It cannot be hardened or strengthened by heat treatment. Its many applications include valve parts, small propellers, gears and marine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-320. Producer or source: Copper alloy foundries.

ECLIPSALOY 520

Alloy Digest ◽  
1961 ◽  
Vol 10 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Fine Grain

Abstract ECLIPSALOY 520 is a fine-grain magnesium sand casting alloy containing zinc and zirconium. It is recommended where high strength is required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Mg-50. Producer or source: Bendix Aviation Corporation.

UNS C83600

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Lead Zinc ◽  
Strength And Ductility

Abstract UNS C83600 is a free-cutting copper-tin-lead-zinc casting alloy. It offers good casting characteristics but soundness is poor in large castings. It has moderate strength and ductility, and good resistance to corrosion. It is used widely for such applications as valves, gears and general hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-543. Producer or source: Copper alloy producers.

ALUMINUM 355.0

Alloy Digest ◽  
1982 ◽  
Vol 31 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract ALUMINUM 355.0 is a general-purpose, high-strength casting alloy containing silicon and copper as the major alloying elements. Its casting characteristics are excellent and it is recommended for pressure-tight castings. It can be age hardened and has good resistance to corrosion. Among its uses are housings, cylinder heads and propeller gear boxes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-235. Producer or source: Various aluminum companies.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

UNS A03560

Alloy Digest ◽  
1986 ◽  
Vol 35 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Aluminum Casting ◽  
Good Resistance ◽  
Aluminum Casting Alloy ◽  
Temperature Performance ◽  
Heat Treated

Abstract UNS No. A03560 is a heat-treatable aluminum casting alloy. Normally it is used only when heat-treated (aged) strengths are required. It is recommended for high-strength, pressure-tight castings, intricate shapes and where good resistance to corrosion is needed. Its many applications include crank cases, gear cases, oil pans, airframe fittings and instrument housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-274. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document