NOVALLOY 280

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Applications ◽  
Nickel Cobalt

Abstract Novalloy 280 is a nickel-cobalt steel fastener alloy that was introduced for use in military and aerospace applications, but now is available for general fastener use. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on heat treating. Filing Code: FE-115. Producer or source: Nova Machine Products Corporation.

ALCAN 6156 T4, T62

Alloy Digest ◽  
2007 ◽  
Vol 56 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Aerospace Applications ◽  
2024 Alloy

Abstract Alcan 6156 T4, T6 clad sheets were developed with weldability and high damage tolerance compared with incumbent 2024 alloy. Aerospace applications include fuselages clad sheets. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: AL-408. Producer or source: Alcan Inc.

ALCAN 7449 T7651

Alloy Digest ◽  
2007 ◽  
Vol 56 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Applications

Abstract Alcan 7449 T7651 plates were developed with a better strength/corrosion-resistance balance than the incumbent alloy 7150. Aerospace applications include parts, ribs, and frames. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming and heat treating. Filing Code: AL-406. Producer or source: Alcan Inc.

THERLO

Alloy Digest ◽  
1961 ◽  
Vol 10 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Cobalt Alloy ◽  
Nickel Cobalt ◽  
Iron Nickel

Abstract THERLO, also known as D-H Alloy No. 373, is an iron-nickel-cobalt alloy ideally suited for sealing to glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-11. Producer or source: Driver-Harris Company. Originally published July 1956, revised August 1961.

FEDERATED F410

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Aerospace Applications

Abstract FEDERATED F410 is a heat-treatable aluminum sand casting alloy recommended for uses requiring high strength along with toughness and ductility. It has good machinability, fair castability, and is suitable for a number of automotive and aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-210. Producer or source: Federated Metals Corporation, ASARCO Inc..

UGI 4057 AIR

Alloy Digest ◽  
2016 ◽  
Vol 65 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Aerospace Applications

Abstract UGI 4057 Air is a carbon martensitic stainless steel with nickel for aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1247. Producer or source: Schmolz + Bickenbach USA Inc..

ALCAN 2098, 2X98 O/T82P

Alloy Digest ◽  
2007 ◽  
Vol 56 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Low Density ◽  
Aerospace Applications ◽  
2024 Alloy

Abstract Alcan 2098 and 2x98 are Al-Cu-Li-Mg-Ag alloys designed to provide a balanced combination of high strength, low density, fatigue resistance, and fracture toughness for aerospace applications. This data sheet covers Alcan 2098 and 2x98 Al-Li fuselage sheets. The O and T82P tempers show improvement over the 2024 alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-405. Producer or source: Alcan Inc.

TIMETAL 21S

Alloy Digest ◽  
1998 ◽  
Vol 47 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Creep Strength ◽  
Heat Treating ◽  
Engine Exhaust ◽  
Aerospace Applications ◽  
Temperature Performance

Abstract TIMETAL 21S (Ti-15%Mo-3%Nb-3%Al-0.2Si) offers the good cold formability and weldability of a beta strip alloy, but with greatly improved oxidation resistance and creep strength. Aerospace applications include engine exhaust plug and nozzle assemblies. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: TI-105. Producer or source: Titanium Metals Corporation (Timet). Originally published March 1993, revised October 1998.

MULTIMET ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Cobalt Alloy ◽  
Good Oxidation Resistance ◽  
Temperature Performance ◽  
Nickel Cobalt ◽  
Iron Chromium

Abstract MULTIMET alloy is an iron-chromium-nickel-cobalt alloy with excellent inherent high-temperature properties up to 2000 F. It has very good oxidation resistance and ductility and is readily fabricated. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-500. Producer or source: Haynes International Inc..

UGI 4545 AIR

Alloy Digest ◽  
2018 ◽  
Vol 67 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Aerospace Applications

Abstract UGI 4545 Air is a precipitation hardening martensitic stainless steel designed for aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1280. Producer or source: Schmolz + Bickenbach USA Inc..

AERMET 100 ALLOY

Alloy Digest ◽  
1994 ◽  
Vol 43 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Aerospace Applications ◽  
Resistance To Stress

Abstract AerMet 100 alloy possesses a combination of high strength, hardness, toughness and good resistance to stress-corrosion from chlorides. It can be used for many aerospace applications such as landing gear and fasteners. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on heat treating. Filing Code: FE-107. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document