ECLIPSALOY 130

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Die Casting ◽  
Impact Resistance ◽  
Heat Treating ◽  
Hot Cracking ◽  
Casting Alloy ◽  
Cracking Tendency

Abstract ECLIPSALOY 130 is a magnesium die casting alloy having improved ductility, high corrosion, and impact resistance. The alloy was developed primarily to obtain an alloy of magnesium for die casting with less hot cracking tendency than those in use at the time of its development. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and surface treatment. Filing Code: Mg-33. Producer or source: Bendix Aviation Corporation.

MAGNESIUM AZ91B

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Die Casting ◽  
Casting Alloy ◽  
Casting Industry ◽  
Magnesium Die Casting

Abstract MAGNESIUM AZ91B is a standard magnesium die casting alloy patterned for the needs of the commercial casting industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Mg-36. Producer or source: Apex Smelting Company.

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

ELEKTRON QH21A

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Casting Alloy ◽  
Casting Alloys ◽  
Temperature Performance

Abstract ELEKTRON QH21A is a magnesium-base casting alloy developed to meet the ever increasing requirements for casting alloys to operate at elevated temperatures. It is of particular interest to designers and stress engineers for highly stressed components operating at temperatures up to 480 F (250 C), especially where pressure tightness is a requirement. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-72. Producer or source: Magnesium Elektron Inc..

ASARCO Z.D.C. No. 7

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy

Abstract ASARCO Z.D.C. No. 7 is a zinc die casting alloy which will be found particularly helpful in casting relatively large, complicated shapes and intricate parts which are not free to shrink in the dies because of cores, slides, etc. and require a hardware finish for subsequent plating or organic finishes. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-10. Producer or source: Federated Metals Corporation, ASARCO Inc..

ZAMAK-5

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy

Abstract ZAMAK-5 has moderately greater hardness, strength and creep resistance than the most widely used general purpose zinc die casting alloy, ZAMAK 3 (See Alloy Digest Zn-1, September 1991). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-2. Producer or source: Noranda Sales Corporation. Originally published as Zamak-5, May 1954, revised February 1992.

HI-FLO

Alloy Digest ◽  
1963 ◽  
Vol 12 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Aluminum Castings

Abstract HI-FLO is an aluminum die casting alloy having high strength, castability and ductility. It is recommended for special-purpose aluminum castings which must be bent, formed, crimped or peened over after casting. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-132. Producer or source: Federated Metals Corporation, ASARCO Inc..

NIMOCAST 90

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Creep Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract Nimocast 90 is a nickel-base casting alloy having useful creep resistance at temperatures up to 870 C. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-101. Producer or source: Henry Wiggin & Company Ltd.

DOMAL AZ91X

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance

Abstract DOMAL AZ91Z is a 9% Al, 1% Zn, magnesium die casting alloy. It combines good mechanical properties, casting characteristics and resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Mg-11. Producer or source: Dominion Magnesium Ltd.

MAGNESIUM HM11XA

Alloy Digest ◽  
1962 ◽  
Vol 11 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Die Casting ◽  
High Strength ◽  
Heat Treating ◽  
Light Weight ◽  
Casting Alloy

Abstract Magnesium HM11XA is a die casting alloy recommended for service above 500 F. It is a high-temperature high-strength, light weight alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and surface treatment. Filing Code: Mg-51. Producer or source: Magnesium die casters.

Sign in / Sign up

Export Citation Format

Share Document