HASTELLOY ALLOY R-235

Alloy Digest ◽  
1965 ◽  
Vol 14 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Union Carbide Corporation ◽  
Good Oxidation Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract HASTELLOY ALLOY R-235 is a vacuum-melted nickel-base precipitation-hardening alloy with outstanding properties through 1750 F. It has good oxidation resistance, and a remarkable resistance to overaging in service. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-97. Producer or source: Union Carbide Corporation, Stellite Division.

AMPCOLOY 553

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMPCOLOY 553 alloy is an age-hardenable nickel-base casting alloy that provides unusual strength, hardness, corrosion resistance and anti-galling properties at elevated temperatures up to 1100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-130. Producer or source: Ampco Metal Inc..

COLMONOY No. 69

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Plastic Range ◽  
Powder Metal ◽  
Temperature Performance ◽  
Nickel Base

Abstract COLMONOY No. 69 is a nickel-base hard-surfacing alloy incorporating the attractive qualities of Colmony No. 6 plus greatly improved out-of-position fusing characteristics. Its extended plastic range means that sagging and running of other-than-horizontal surfaces during finishing is virtually eliminated. It is supplied as an atomized powder of application with Wall Colmonoy's SPRAYWELD Process. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-206. Producer or source: Wall Colmonoy Corporation.

UNITEMP 1753

Alloy Digest ◽  
1963 ◽  
Vol 12 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel Base

Abstract UNITEMP 1753 is a nickel-base precipitation hardening superalloy. It was developed for applications requiring wrought product with high strength and excellent oxidation resistance at temperatures up to about 1800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-87. Producer or source: Universal Cyclops Steel Corporation.

UDIMET 41

Alloy Digest ◽  
1964 ◽  
Vol 13 (6) ◽  
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base ◽  
Corrosion And Oxidation

Abstract UDIMET 41 is a vacuum induction melted precipitation hardening nickel-base alloy having outstanding room and elevated temperature properties. It possesses excellent corrosion and oxidation resistance. It is designed for highly stressed components operating in the 1400-1700 deg F temperature range. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-92. Producer or source: Special Metals Inc..

UNITEMP HX

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Base Material ◽  
Heat Treating ◽  
Operating Conditions ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Nickel Base

Abstract Unitemp-HX is a nickel-base material recommended for high temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-91. Producer or source: Universal Cyclops Steel Corporation.

ALLVAC 80A

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLVAC 80A is an 80% Ni/20% Cr alloy which is strengthened by precipitation hardening through the addition of Ti and A1. It is produced by vacuum induction plus vacuum are remelting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-379. Producer or source: Allvac Inc..

UDIMET 105

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 105 is a nickel-base alloy which was developed for service at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-175. Producer or source: Special Metals Corporation.

STOODY 4

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
High Temperature Strength ◽  
Cobalt Chromium ◽  
Temperature Performance

Abstract STOODY 4 is a cobalt-chromium-tungsten alloy with excellent high-temperature strength and excellent resistance to corrosion. This alloy derives its high-temperature strength from the high tungsten-to-carbon ratio which allows a large percentage of tungsten to remain in solid solution. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-75. Producer or source: WRAP Division, Stoody Company.

WALLEX No. 40

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Red Hardness ◽  
Cobalt Base

Abstract WALLEX No. 40 is a self-fluxing, cobalt-base hard-surfacing alloy with excellent resistance to a combination of corrosion and abrasion and relatively good impact properties. It has excellent red hardness and weldability. It is supplied only as atomized powder for application with Wall Colmonoy's SPRAYWELD and FUSEWELD processes. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: Co-74. Producer or source: Wall Colmonoy Corporation.

BIRMABRIGHT B.B.5

Alloy Digest ◽  
1959 ◽  
Vol 8 (11) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Medium Strength ◽  
Resistant Medium

Abstract BIRMABRIGHT B.B.5 is a corrosion resistant, medium-strength magnesium-aluminum alloy in both the cast and wrought conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Al-85. Producer or source: Birmabright Ltd.

Sign in / Sign up

Export Citation Format

Share Document