ALLVAC 80A

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLVAC 80A is an 80% Ni/20% Cr alloy which is strengthened by precipitation hardening through the addition of Ti and A1. It is produced by vacuum induction plus vacuum are remelting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-379. Producer or source: Allvac Inc..

VIRGO 15.5 PH

Alloy Digest ◽  
2005 ◽  
Vol 54 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Temperature Performance

Abstract Virgo 15.5PH is a 15Cr-5Ni-3Cu-0.3Nb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with medium corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-929. Producer or source: Industeel USA, LLC.

ESCO ALLOY 36PH

Alloy Digest ◽  
1962 ◽  
Vol 11 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Temperature Performance

Abstract ESCO Alloy 36PH is a cast copper containing Fe-Cr-Ni precipitation hardening stainless alloy. It is the cast counterpart of the familiar Armco 17-4PH precipitation hardening alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-134. Producer or source: ESCO Corporation.

UNITEMP 1753

Alloy Digest ◽  
1963 ◽  
Vol 12 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel Base

Abstract UNITEMP 1753 is a nickel-base precipitation hardening superalloy. It was developed for applications requiring wrought product with high strength and excellent oxidation resistance at temperatures up to about 1800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-87. Producer or source: Universal Cyclops Steel Corporation.

AA 6061

Alloy Digest ◽  
1990 ◽  
Vol 39 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Magnesium Silicide ◽  
Temperature Performance

Abstract AA 6061 contains silicon and magnesium in approximate proportions to form magnesium silicide which is the precipitation hardening constituent. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-303. Producer or source: Various aluminum companies.

UNITEMP 212

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNITEMP 212 is a precipitation hardening steel that will maintain high strength and corrosion resistance up to 1400 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: SS-105. Producer or source: Cyclops Corporation.

PYROMET V-57

Alloy Digest ◽  
1986 ◽  
Vol 35 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Consumable Electrode ◽  
Iron Base ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PYROMET V-57 is an austenitic, iron-base precipitation-hardening alloy designed for service up to 1400 F (760 C) with good corrosion resistance at operating temperatures. The alloy is usually consumable-electrode, vacuum melted. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: SS-474. Producer or source: Carpenter.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

Sign in / Sign up

Export Citation Format

Share Document