MAGNIFER 75

Alloy Digest ◽  
1983 ◽  
Vol 32 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Very High

Abstract MAGNIFER 75 is a soft magnetic nickel-iron alloy containing about 5% copper and 2% chromium. It offers very high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound toroids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-294. Producer or source: Vereingte Deutsche Metallwerke AG.

MAGNIFER 7904

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

MAGNIFER 36W

Alloy Digest ◽  
1996 ◽  
Vol 45 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifier 36 is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-111. Producer or source: VDM Technologies Corporation.

BLENDALLOY 25-5000

Alloy Digest ◽  
1973 ◽  
Vol 22 (3) ◽  
Keyword(s):  
Magnetic Properties ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Coercive Force ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Rectangular Hysteresis Loop ◽  
Nickel Iron Alloy

Abstract BLENDALLOY 25-5000 is a nickel-iron alloy with a rectangular hysteresis loop and low coercive force. It is a powder metallurgy product and this helps to provide it with uniform and consistent magnetic properties, exceptional purity and cleanliness, precise chemcial composition and guaranteed reproducibility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-188. Producer or source: Spang Industries Inc..

MUMETAL

Alloy Digest ◽  
1956 ◽  
Vol 5 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Nickel Iron ◽  
Steel Corporation ◽  
Nickel Iron Alloy

Abstract MUMETAL is a high permeability nickel iron alloy to be used where high permeability at flux densities well under 5000 gausses is desirable. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-25. Producer or source: Allegheny Ludlum Steel Corporation. See also Alloy Digest Ni-398, December 1991.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

INVAR

Alloy Digest ◽  
1964 ◽  
Vol 13 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Temperature Performance ◽  
Nickel Iron Alloy

Abstract INVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-24. Producer or source: Carpenter.

BLENDALLOY 25-7904

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Shielding ◽  
High Permeability ◽  
Magnetic Cores ◽  
Very High

Abstract BLENDALLOY 25-7904 is an 80% nickel-15% iron-5% molybdenum alloy having very high permeability and low coercive force for magnetic cores in such applications as transformer laminations, sensitive magnetic amplifiers and magnetic shielding. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-181. Producer or source: Spang Industries Inc..

NILVAR

Alloy Digest ◽  
1955 ◽  
Vol 4 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Nickel Iron Alloy

Abstract NILVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-8. Producer or source: Driver-Harris Company.

BLENDALLOY 25-5025

Alloy Digest ◽  
1992 ◽  
Vol 41 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Specialty Metals

Abstract BLENDALLOY 25-5025 is a soft magnetic nickel/iron alloy. It is produced by power metallurgy techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: Ni-402. Producer or source: Spang Specialty Metals.

Sign in / Sign up

Export Citation Format

Share Document