UGINOX MA2

Alloy Digest ◽  
2008 ◽  
Vol 57 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Sharp Edge ◽  
Aisi Type

Abstract Uginox MA2 (X20Cr13, No. 1.4021; AISI type 420) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1012. Producer or source: Arcelor Stainless Processing LLC.

UGINOX MA3

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Sharp Edge ◽  
Aisi 420

Abstract Uginox MA3 (X30Cr13, No. 1.4028; AISI 420) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1015. Producer or source: Arcelor Stainless Processing LLC.

UGINOX MA3M

Alloy Digest ◽  
2008 ◽  
Vol 57 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Food Preparation ◽  
Sharp Edge

Abstract Uginox MA3M (X38CrMo14, No. 1.4419) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. The molybdenum-containing MA3M and Ma5MV grades can be used for kitchen knife and other food preparation blades due to their corrosion resistance and the possibility of achieving high hardness levels in the quenched and tempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1017. Producer or source: Arcelor Stainless Processing LLC.

AL TECH TYPE 416 EZ

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Aisi Type ◽  
Steel Corporation ◽  
Specialty Steel

Abstract Al Tech 416 EZ is one variation of AISI Type 416, the free-machining martensitic stainless steel that has been one of the staples of the automatic machining industry. It offers higher hardenability than other AL Tech variations, but does not machine as readily as them. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-665. Producer or source: AL Tech Specialty Steel Corporation.

UGINOX MA4

Alloy Digest ◽  
2008 ◽  
Vol 57 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Sharp Edge

Abstract UGINOX MA4 (X46Cr13, No. 1.4034) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1023. Producer or source: Arcelor Stainless Processing LLC.

UGINOX MA5MV

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Food Preparation ◽  
Sharp Edge

Abstract Uginox MA5MV (X50CrMoV15, No. 1.4116) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. The molybdenum-containing MA3M (Alloy Digest SS-1017, September 2008) and Ma5MV grades can be used for kitchen knife and other food preparation blades due to their corrosion resistance and the possibility of achieving high hardness levels in the quenched and tempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1031. Producer or source: Arcelor Stainless Processing LLC.

AL TECH TYPE 416 EZR

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Aisi Type ◽  
Steel Corporation ◽  
Specialty Steel

Abstract AL Tech 416 EZR is one variation of AISI Type 416, the free-machining martensitic stainless steel that has been one of the staples of the automatic machining industry. It offers higher machinability than Type 416 EZ (Alloy Digest SS-665, December 1996), but is not recommended for bright hardening. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-667. Producer or source: AL Tech Specialty Steel Corporation.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 203

Alloy Digest ◽  
1997 ◽  
Vol 46 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Stainless Steels ◽  
Heat Treating ◽  
High Manganese ◽  
Aisi Type ◽  
Alternative Materials

Abstract Project 70 and Project 7000 Type 203 stainless steels are alternative materials to AISI Type 303, resulfurized stainless steel having improved machinability. High manganese and copper are substituted for some nickel resulting in a stable austenitic structure having low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-505. Producer or source: Carpenter. Originally published May 1989, revised August 1997.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

HPM 455

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Combination ◽  
Heat Treated

Abstract HPM 455 is a precipitation hardenable martensitic stainless steel. The composition provides a good combination of corrosion resistance and heat-treated strength favorable for fatigue applications. The material is well suited for demanding spring devices. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-666. Producer or source: Hamilton Precision Metals Inc.

AISI TYPE 314

Alloy Digest ◽  
1988 ◽  
Vol 37 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE 314 is an austenitic chromium-nickel stainless steel with the highest heat resisting properties of any of the chromium-nickel steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-100. Producer or source: Stainless steel mills. Originally published February 1960, revised October 1988.

Sign in / Sign up

Export Citation Format

Share Document