Ti-150A

Alloy Digest ◽  
1954 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Ti-150A is a titanium-base alloy containing iron and chromium. It is used primarily in bars and forgings. It is heat treatable and work-hardenable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-2. Producer or source: Titanium Metals Corporation of America.

COLUMBIUM 1% Zr

Alloy Digest ◽  
1966 ◽  
Vol 15 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
High Temperature Components

Abstract COLUMBIUM-1% Zr is a readily fabricable, moderate strength columbium-base alloy for high temperature service. It is double consumable-electrode vacuum are melted. It is recommended for missiles, spacecraft and high temperature components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-11. Producer or source: Wah Chang.

REM-CRU A-55

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract REM-CRU A-55 is the general purpose grade of unalloyed titanium for moderate to severe forming. (Formerly known as RC-55). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-13. Producer or source: Rem-Cru Titanium Inc..

REM-CRU C-135AMo

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Time ◽  
Temperature Performance

Abstract REM-CRU C-135AMo is a titanium-base alloy having good time-temperature-stress stability and deep hardenability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-14. Producer or source: Rem-Cru Titanium Inc..

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

ALUMINUM 852.0

Alloy Digest ◽  
1983 ◽  
Vol 32 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Permanent Mold ◽  
Temperature Performance

Abstract ALUMINUM 852.0 contains higher concentrations of copper and nickel than either Aluminum 850.0 or Aluminum 851.0 alloy. The higher copper and nickel percentages and an addition of magnesium give Aluminum 852.0 higher strength and make it suitable for bearing applications requiring improved resistance to higher operating stresses (loads). Aluminum 852.0 is used for the production of castings by the sand and permanent-mold processes. It is normally supplied and used in the T5 temper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-248. Producer or source: Various aluminum companies.

MST 8Mn

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Sheet Alloy ◽  
Temperature Performance

Abstract MST 8Mn is a heat treatable sheet alloy having good formability and recommended for use at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-17. Producer or source: Mallory-Sharon Titanium Corporation.

Ti-140A

Alloy Digest ◽  
1962 ◽  
Vol 11 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Ti-104A is a titanium alloy containing about 2% each of iron, chromium and molybdenum. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-5. Producer or source: Titanium Metals Corporation of America. Originally published July 1954, revised January 1962.

ALLEGHENY LUDLUM ALLOY S-590

Alloy Digest ◽  
1956 ◽  
Vol 5 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLOY S-590 is designed for service in the range of 1100-1400 F for applications where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-39. Producer or source: Allegheny Ludlum Corporation.

COPPER ALLOY No. 101

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Copper No. 101 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. Its trade designation is OFE (Oxygen Free Electronic) copper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-278. Producer or source: Copper and copper alloy mills.

OFHC COPPER

Alloy Digest ◽  
1964 ◽  
Vol 13 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Conductivity ◽  
Ofhc Copper ◽  
Temperature Performance

Abstract OFHC copper is a high conductivity, oxygen free grade of copper furnished in two grades, namely, Regular Grade and Certified Grade. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-144. Producer or source: American Metal Climax Inc..

Sign in / Sign up

Export Citation Format

Share Document