scholarly journals Generalized versus Patient-Specific Inflow Boundary Conditions in Computational Fluid Dynamics Simulations of Cerebral Aneurysmal Hemodynamics

2014 ◽  
Vol 35 (8) ◽  
pp. 1543-1548 ◽  
Author(s):  
I. G. H. Jansen ◽  
J. J. Schneiders ◽  
W. V. Potters ◽  
P. van Ooij ◽  
R. van den Berg ◽  
...  
Author(s):  
R Zimmermann ◽  
R Baar ◽  
C Biet

The determination of the isentropic turbine efficiency under adiabatic and SAE boundary conditions is studied in this paper. The study is structured into two parts. The first part describes the possibility of measuring the isentropic turbine efficiency directly. Normally this is not possible in measurements conducted following the SAE J922 guidelines. Therefore, the experiments have been carried out under adiabatic conditions, and combined with improved measuring equipment. The results were compared with adiabatic computational fluid dynamics simulations of this turbocharger. In the second part, a new criterion is defined in order to evaluate the quality of the adiabatic measurements and compare them with standard measurements. The investigation has been carried out with multiple turbochargers ranging from very small to medium passenger car size turbochargers. In the end, a possible application for the criterion is given.


2021 ◽  
Vol 24 (1) ◽  
Author(s):  
T. van Druenen ◽  
B. Blocken

AbstractSome teams aiming for victory in a mountain stage in cycling take control in the uphill sections of the stage. While drafting, the team imposes a high speed at the front of the peloton defending their team leader from opponent’s attacks. Drafting is a well-known strategy on flat or descending sections and has been studied before in this context. However, there are no systematic and extensive studies in the scientific literature on the aerodynamic effect of uphill drafting. Some studies even suggested that for gradients above 7.2% the speeds drop to 17 km/h and the air resistance can be neglected. In this paper, uphill drafting is analyzed and quantified by means of drag reductions and power reductions obtained by computational fluid dynamics simulations validated with wind tunnel measurements. It is shown that even for gradients above 7.2%, drafting can yield substantial benefits. Drafting allows cyclists to save over 7% of power on a slope of 7.5% at a speed of 6 m/s. At a speed of 8 m/s, this reduction can exceed 16%. Sensitivity analyses indicate that significant power savings can be achieved, also with varying bicycle, cyclist, road and environmental characteristics.


Sign in / Sign up

Export Citation Format

Share Document