scholarly journals Trade-Off in Fire-Retardant Solar Cell Materials and Environmental Issues

2018 ◽  
pp. 1-1 ◽  
Author(s):  
Takashiro Akitsu ◽  
Kenta Mizuno
Keyword(s):  
Solar Cell ◽  
Nuclear Power ◽  
High Efficiency ◽  
Low Cost ◽  
Fire Retardant ◽  
Organic Thin Films ◽  
Silicon Compound ◽  
Energy Devices ◽  
Dye Sensitized ◽  
In Fire

In recent years, several types of solar cells, such as polycrystalline silicon, compound semiconductor and organic thin films, have been and grown and developed as one of the promising renewable energy devices for low cost and safety compared with nuclear power generation. They were composed from many components and their materials generally. As for Dye Sensitized Solar Cell (DSSC), which may be high efficiency and easy to assemble but not be expensive so much, not only inorganic titanium oxide and organic or metal complex dyes but also organic solvents as electrolyte. Furthermore, a condensing lens made of plastic are also used to improve power generating efficiency.

Synthesis of TiO2 Nanopowders and their Applications in Dye-Sensitized Solar Cell

2010 ◽  
Vol 663-665 ◽  
pp. 848-851
Author(s):  
Jian Sun ◽  
Yan Xiang Wang ◽  
Min Xu ◽  
Ting Li Ma ◽  
Xue Yun Fan
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Low Cost ◽  
Short Circuit ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Tio2 Nanopowders

Dye-sensitized solar cells (DSSC) are currently attracting widespread interest for the conversion of sunlight into electricity because of their low cost and high efficiency. In these cells, photo-anode is one of the key components for high power conversion efficiencies. In this paper, TiO2 nanopowders were prepared by the non-hydrolytic sol-gel method using TiCl4 as precursor, absolute ethanol and isopropanol as oxygen donor. Several different TiO2 nanopowders were used to fabricate TiO2 solar cells, and properties of TiO2 solar cells were characterized. The solar cell prepared with grainsize 50~80nm TiO2 nanopowders generated a short-circuit photocurrent of 13.17 mA/cm2, an open-circuit photovoltage of 789 mV, a fill factor of 69.8% and the efficiency of 7.25% under the light intensity of 100 mW/cm2.

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films

Nature ◽  
1991 ◽  
Vol 353 (6346) ◽  
pp. 737-740 ◽  
Author(s):  
Brian O'Regan ◽  
Michael Grätzel
Keyword(s):  
Solar Cell ◽  
High Efficiency ◽  
Low Cost ◽  
Tio2 Films ◽  
Dye Sensitized

scholarly journals Functionalization of Congo red dye as a light harvester on solar cell

2020 ◽  
Vol 18 (1) ◽  
pp. 287-294
Author(s):  
Harsasi Setyawati ◽  
Handoko Darmokoesoemo ◽  
Irmina Kris Murwani ◽  
Ahmadi Jaya Permana ◽  
Faidur Rochman
Keyword(s):  
Solar Cell ◽  
Congo Red ◽  
Large Scale ◽  
High Efficiency ◽  
Solar Cell Device ◽  
Dye Sensitized ◽  
Congo Red Dye ◽  
Elemental Analyses ◽  
Red Dye ◽  
Solar Cell Technology

AbstractThe demands of ecofriendly technologies to produce a reliable supply of renewable energy on a large scale remains a challenge. A solar cell based on DSSC (Dye-Sensitized Solar Cell) technology is environmentally friendly and holds the promise of a high efficiency in converting sunlight into electricity. This manuscript describes the development of a light harvester system as a main part of a DSSC. Congo red dye has been functionalized with metals (Fe, Co, Ni), forming a series of complexes that serve as a novel light harvester on the solar cell. Metal-congo red complexes have been characterized by UV-VIS and FTIR spectroscopy, and elemental analyses. The performance of metal complexes in capturing photons from sunlight has been investigated in a solar cell device. The incorporation of metals to congo red successfully improved of the congo red efficiency as follows: Fe(II)-congo red, Co(II)-congo red and Ni(II)-congo red had efficiencies of 8.17%, 6.13% and 2.65%, respectively. This research also discusses the effect of metal ions on the ability of congo red to capture energy from sunlight.

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

Organic and nano-structured composite photovoltaics: An overview

2005 ◽  
Vol 20 (12) ◽  
pp. 3167-3179 ◽  
Author(s):  
Sophie E. Gledhill ◽  
Brian Scott ◽  
Brian A. Gregg
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Semiconductors ◽  
Organic Solar Cells ◽  
Organic Materials ◽  
Low Cost ◽  
Open Circuit ◽  
Charge Generation ◽  
Dye Sensitized ◽  
Excitonic Solar Cells

Organic photovoltaic devices are poised to fill the low-cost, low power niche in the solar cell market. Recently measured efficiencies of solid-state organic cells are nudging 5% while Grätzel’s more established dye-sensitized solar cell technology is more than double this. A fundamental understanding of the excitonic nature of organic materials is an essential backbone for device engineering. Bound electron-hole pairs, “excitons,” are formed in organic semiconductors on photo-absorption. In the organic solar cell, the exciton must diffuse to the donor–accepter interface for simultaneous charge generation and separation. This interface is critical as the concentration of charge carriers is high and recombination here is higher than in the bulk. Nanostructured engineering of the interface has been utilized to maximize organic materials properties, namely to compensate the poor exciton diffusion lengths and lower mobilities. Excitonic solar cells have different limitations on their open-circuit photo-voltages due to these high interfacial charge carrier concentrations, and their behavior cannot be interpreted as if they were conventional solar cells. This article briefly reviews some of the differences between excitonic organic solar cells and conventional inorganic solar cells and highlights some of the technical strategies used in this rapidly progressing field, whose ultimate aim is for organic solar cells to be a commercial reality.

Sign in / Sign up

Export Citation Format

Share Document