Improving The Reliability of Velocity Analysis of Shallow Seismic Data

Author(s):  
A.G. Yaroslavtsev ◽  
M.V. Tarantin ◽  
T.V. Baibakova
1996 ◽  
Author(s):  
Dennis Corrigan ◽  
Robert Withers ◽  
Jim Darnall ◽  
Tracey Skopinski

Geophysics ◽  
1998 ◽  
Vol 63 (4) ◽  
pp. 1241-1247 ◽  
Author(s):  
Linus Pasasa ◽  
Friedemann Wenzel ◽  
Ping Zhao

Prestack Kirchhoff depth migration is applied successfully to shallow seismic data from a waste disposal site near Arnstadt in Thuringia, Germany. The motivation behind this study was to locate an underground building buried in a waste disposal. The processing sequence of the prestack migration is simplified significantly as compared to standard common (CMP) data processing. It includes only two parts: (1) velocity‐depth‐model estimation and (2) prestack depth migration. In contrast to conventional CMP stacking, prestack migration does not require a separation of reflections and refractions in the shot data. It still provides an appropriate image. Our data example shows that a superior image can be achieved that would contain not just subtle improvements but a qualitative step forward in resolution and signal‐to‐noise ratio.


2021 ◽  
Vol 11 (1) ◽  
pp. 78
Author(s):  
Jianbo He ◽  
Zhenyu Wang ◽  
Mingdong Zhang

When the signal to noise ratio of seismic data is very low, velocity spectrum focusing will be poor., the velocity model obtained by conventional velocity analysis methods is not accurate enough, which results in inaccurate migration. For the low signal noise ratio (SNR) data, this paper proposes to use partial Common Reflection Surface (CRS) stack to build CRS gathers, making full use of all of the reflection information of the first Fresnel zone, and improves the signal to noise ratio of pre-stack gathers by increasing the number of folds. In consideration of the CRS parameters of the zero-offset rays emitted angle and normal wave front curvature radius are searched on zero offset profile, we use ellipse evolving stacking to improve the zero offset section quality, in order to improve the reliability of CRS parameters. After CRS gathers are obtained, we use principal component analysis (PCA) approach to do velocity analysis, which improves the noise immunity of velocity analysis. Models and actual data results demonstrate the effectiveness of this method.


Author(s):  
David G. Jones ◽  
Christopher H. Vane ◽  
Solveigh Lass-Evans ◽  
Simon Chenery ◽  
Bob Lister ◽  
...  

ABSTRACTGeochemical and related studies have been made of near-surface sediments from the River Clyde estuary and adjoining areas, extending from Glasgow to the N, and W as far as the Holy Loch on the W coast of Scotland, UK. Multibeam echosounder, sidescan sonar and shallow seismic data, taken with core information, indicate that a shallow layer of modern sediment, often less than a metre thick, rests on earlier glacial and post-glacial sediments. The offshore Quaternary history can be aligned with onshore sequences, with the recognition of buried drumlins, settlement of muds from quieter water, probably behind an ice dam, and later tidal delta deposits. The geochemistry of contaminants within the cores also indicates shallow contaminated sediments, often resting on pristine pre-industrial deposits at depths less than 1m. The distribution of different contaminants with depth in the sediment, such as Pb (and Pb isotopes), organics and radionuclides, allow chronologies of contamination from different sources to be suggested. Dating was also attempted using microfossils, radiocarbon and 210Pb, but with limited success. Some of the spatial distribution of contaminants in the surface sediments can be related to grain-size variations. Contaminants are highest, both in absolute terms and in enrichment relative to the natural background, in the urban and inner estuary and in the Holy Loch, reflecting the concentration of industrial activity.


2019 ◽  
Vol 49 (2) ◽  
Author(s):  
Ariel Henrique do Prado ◽  
Renato Paes de Almeida ◽  
Larissa Natsumi Tamura ◽  
Cristiano Padalino Galeazzi ◽  
Marco Ianniruberto

Sign in / Sign up

Export Citation Format

Share Document