Evaluate Fabric Wrinkle Grade Based on Subtractive Clustering Adaptive Network Fuzzy Inference Systems

2011 ◽  
Vol 332-334 ◽  
pp. 1505-1510
Author(s):  
Xiao Bo Yang
Keyword(s):  
Network Inference ◽  
Clustering Algorithm ◽  
Fuzzy Inference ◽  
Real Data ◽  
Subtractive Clustering ◽  
Fuzzy Inference Systems ◽  
Adaptive Network ◽  
Inference System ◽  
Fuzzy Neural ◽  
Inference Systems

In this paper, a new method of subtractive clustering adaptive network fuzzy inference systems is proposed to assess degree of wrinkle in the fabric. The clustering center can be gotten through subtractive clustering algorithm, which is the base to set up adaptive network inference systems. Firstly, subtractive clustering algorithm is used to confirm the structure of fuzzy neural network, then, fuzzy inference system is used to process pattern recognition. Finally, four kinds of fabric wrinkle feature parameters are used to verify the results on real fabric. The results show the applicability of the proposed method to real data.

Demand forecasting in the beauty industry using fuzzy inference systems

2020 ◽  
Vol 15 (4) ◽  
pp. 1389-1417
Author(s):  
Ricardo Felicio Souza ◽  
Peter Wanke ◽  
Henrique Correa
Keyword(s):  
Time Series ◽  
Fuzzy Inference System ◽  
Fuzzy Inference ◽  
Theory And Practice ◽  
Forecast Errors ◽  
Fuzzy Inference Systems ◽  
Inference System ◽  
Content Type ◽  
Forecasting Methods ◽  
Inference Systems

Purpose This study aims to analyze the performance of four different fuzzy inference system-based forecasting tools using a real case company. Design/methodology/approach The forecasting tools were tested using 27 products of the nail polish line of a multinational beauty company and the performance of said tools was compared to those of the company’s previous forecasting methods that were basically qualitative (informal and intuition-based). Findings The performance of the methods analyzed was compared by using mean absolute percentage error. It was possible to determine the characteristics and conditions that make each model the best for each situation. The main takeaways were that low kurtosis, negatively skewed demand time-series and longer horizon forecasts that favor the fuzzy inference system-based models. Besides, the results suggest that the fuzzy forecasting tools should be preferred for longer horizon forecasts over informal qualitative methods. Originality/value Notwithstanding the proposed hybrid modeling approach based on fuzzy inference systems, our research offers a relevant contribution to theory and practice by shedding light on the segmentation and selection of forecasting models, both in terms of time-series characteristics and forecasting horizon. The proposed fuzzy inference systems showed to be particularly useful not only when time-series distributions present no clear central tendency (that is, they are platykurtic or dispersed around a large plateau around the median, which is the characteristic of negative kurtosis), but also when mode values are greater than median values, which in turn are greater than mean values. This large tail to the left (negative skewness) is typical of successful products whose sales are ramping up in early stages of their life cycle. For these, fuzzy inference systems may help managers screen out forecast bias and, therefore, lower forecast errors. This behavior also occurs when managers deal with forecasts of longer horizons. The results suggest that further research on fuzzy inference systems hybrid approaches for forecasting should emphasize short-term forecasting by trying to better capture the “tribal” managerial knowledge instead of focusing on less dispersed and slower moving products, where the purely qualitative forecasting methods used by managers tend to perform better in terms of their accuracy.

scholarly journals Artificial Hydrocarbon Networks Fuzzy Inference System

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Hiram Ponce ◽  
Pedro Ponce ◽  
Arturo Molina
Keyword(s):  
Fuzzy Inference ◽  
Fuzzy Inference Systems ◽  
Inference Model ◽  
Inference System ◽  
Position Controller ◽  
Inference Systems ◽  
Linguistic Units ◽  
Output Space

This paper presents a novel fuzzy inference model based on artificial hydrocarbon networks, a computational algorithm for modeling problems based on chemical hydrocarbon compounds. In particular, the proposed fuzzy-molecular inference model (FIM-model) uses molecular units of information to partition the output space in the defuzzification step. Moreover, these molecules are linguistic units that can be partially understandable due to the organized structure of the topology and metadata parameters involved in artificial hydrocarbon networks. In addition, a position controller for a direct current (DC) motor was implemented using the proposed FIM-model in type-1 and type-2 fuzzy inference systems. Experimental results demonstrate that the fuzzy-molecular inference model can be applied as an alternative of type-2 Mamdani’s fuzzy control systems because the set of molecular units can deal with dynamic uncertainties mostly present in real-world control applications.

SCALABLE ARCHITECTURE FOR HIGH-SPEED MULTIDIMENSIONAL FUZZY INFERENCE SYSTEMS

2011 ◽  
Vol 20 (03) ◽  
pp. 375-400 ◽  
Author(s):  
INÉS DEL CAMPO ◽  
JAVIER ECHANOBE ◽  
KOLDO BASTERRETXEA ◽  
GUILLERMO BOSQUE
Keyword(s):  
High Speed ◽  
High Performance ◽  
Fuzzy Inference ◽  
Reconfigurable Hardware ◽  
Rule Base ◽  
Fuzzy Inference Systems ◽  
Scalable Architecture ◽  
Inference Model ◽  
Inference System ◽  
Inference Systems

This paper presents a scalable architecture suitable for the implementation of high-speed fuzzy inference systems on reconfigurable hardware. The main features of the proposed architecture, based on the Takagi–Sugeno inference model, are scalability, high performance, and flexibility. A scalable fuzzy inference system (FIS) must be efficient and practical when applied to complex situations, such as multidimensional problems with a large number of membership functions and a large rule base. Several current application areas of fuzzy computation require such enhanced capabilities to deal with real-time problems (e.g., robotics, automotive control, etc.). Scalability and high performance of the proposed solution have been achieved by exploiting the inherent parallelism of the inference model, while flexibility has been obtained by applying hardware/software codesign techniques to reconfigurable hardware. Last generation reconfigurable technologies, particularly field programmable gate arrays (FPGAs), make it possible to implement the whole embedded FIS (e.g., processor core, memory blocks, peripherals, and specific hardware for fuzzy inference) on a single chip with the consequent savings in size, cost, and power consumption. As a prototyping example, we implemented a complex fuzzy controller for a vehicle semi-active suspension system composed of four three-input FIS on a single FPGA of the Xilinx's Virtex 5 device family.

An approach for non-singleton generalized Type-2 fuzzy classifiers

2020 ◽  
Vol 39 (5) ◽  
pp. 7203-7215
Author(s):  
Emanuel Ontiveros-Robles ◽  
Oscar Castillo ◽  
Patricia Melin
Keyword(s):  
Fuzzy Systems ◽  
General Type ◽  
Fuzzy Inference ◽  
Classification Problems ◽  
Fuzzy Inference Systems ◽  
Classification Rate ◽  
Inference System ◽  
Fuzzy Classifiers ◽  
Inference Systems

In recent years, successful applications of singleton fuzzy inference systems have been made in a plethora of different kinds of problems, for example in the areas of control, digital image processing, time series prediction, fault detection and classification. However, there exists another relatively less explored approach, which is the use of non-singleton fuzzy inference systems. This approach offers an interesting way for handling uncertainty in complex problems by considering inputs with uncertainty, while the conventional Fuzzy Systems have their inputs with crisp values (singleton systems). Non-singleton systems have as inputs Type-1 membership functions, and this difference increases the complexity of the fuzzification, but provides the systems with additional non-linearities and robustness. The main limitations of using a non-singleton fuzzy inference system is that it requires an additional computational overhead and are usually more difficult to apply in some problems. Based on these limitations, we propose in this work an approach for efficiently processing non-singleton fuzzy systems. To verify the advantages of the proposed approach we consider the case of general type-2 fuzzy systems with non-singleton inputs and their application in the classification area. The main contribution of the paper is the implementation of non-singleton General Type-2 Fuzzy Inference Systems for the classification task, aiming at analyzing its potential advantage in classification problems. In the present paper we propose that the use of non-singleton inputs in Type-2 Fuzzy Classifiers can improve the classification rate and based on the realized experiments we can observe that General Type-2 Fuzzy Classifiers, but with non-singleton fuzzification, obtain better results in comparison with respect to their singleton counterparts.

Sign in / Sign up

Export Citation Format

Share Document