3D Loading Path-Generating Method for FEM Simulation of Incremental Sheet Metal Forming Process

2010 ◽  
Vol 97-101 ◽  
pp. 2810-2815 ◽  
Author(s):  
Yan Xu ◽  
Shuang Gao Li ◽  
Lin Gao
Keyword(s):  
Sheet Metal ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Fem Simulation ◽  
Loading Path ◽  
Forming Process ◽  
Forming Simulation ◽  
Generating Method ◽  
Incremental Sheet Metal Forming ◽  
3D Loading

Incremental forming of sheet metal is difficult to be simulated for its complicated 3D loading path. In this work, an acceptable approach to generate 3D loading path, called “virtual guiding model method” is accomplished. The method, which has the similar idea with the conventional copy mill, is based on FEM and the basic principle of kinematics. With the help of the method, multi-stage incremental forming of a drawing typed square cup was simulated in the FEM software-PAMSTAMP and experimented. Through measuring the thickness distribution the vertical edge of the cup, the most difference between them is less than 0.05mm, which is satisfied with engineering request, and the results shows that the 3D loading path generating method is one of the most effective way to realize the incremental forming simulation.

Experimental Study on Residual Formability of Single Point Incrementally Formed Part

2019 ◽  
Author(s):  
Chetan P. Nikhare
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Single Point ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Conventional Process

Abstract A substantial increase in demand on the sheet metal part usage in aerospace and automotive industries is due to the increase in the sale of these products to ease the transportation. However, due to the increase in fuel prices and further environmental regulation had left no choice but to manufacture more fuel efficient and inexpensive vehicles. These heavy demands force researchers to think outside the box. Many innovative research projects came to replace the conventional sheet metal forming of which single point incremental forming is one of them. SPIF is the emerging die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any processing time to undergo plastic deformation. It has several advantages over the conventional process like high process flexibility, elimination of die, complex shape and better formability. Previous literature provides enormous research on formability of metal during this process, process with various metals and hybrid metals, the influence of various process parameter, but residual formability after this process is untouched. Thus, the aim of this paper is to investigate the residual formability of the formed parts using single point incremental forming and then restrike with a conventional tool. The common process parameters of single point incremental forming were varied, and residual formability was studied through the conventional process. The strain and thickness distribution were measured and analyzed. In addition, the forming limit of the part was plotted and compared.

New Method for Blank Expansion of Rectangular Box

2011 ◽  
Vol 308-310 ◽  
pp. 1004-1007
Author(s):  
Liu Ru Zhou ◽  
Hai Ming Wan
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Apex Angle ◽  
Forming Limit ◽  
Forming Process ◽  
Incremental Sheet Metal Forming ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of the square conical box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The sine law indicates that the thickness of the square conical box wall is close to zero when the half-apex angle of the square conical box wall is close to zero. Therefore, we must know the forming limit half-apex angle to ensure that the forming can be carried out successfully, i.e., to ensure that the deformed region with a certain thickness will not fracture. It will succeed in square conical box incremental forming in a single tool-path if the forming is carried out with an angle which is larger than the forming limit half-apex angle. The fracture in the forming component can be avoided by these methods. A square conical box of uniform wall-thickness can be formed by NC incremental forming process. The thickness of deformation area is increased by increasing half-apex angle. The wrinkle in the forming component can be avoided by these methods.

Compensations for Tool Path to Enhance Accuracy During Double Sided Incremental Forming

2015 ◽  
Author(s):  
Rakesh Lingam ◽  
Anirban Bhattacharya ◽  
Javed Asghar ◽  
N. Venkata Reddy
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Three Dimensional ◽  
Geometric Accuracy ◽  
Forming Process ◽  
Incremental Sheet Metal Forming

Incremental Sheet Metal Forming (ISMF) is a flexible sheet metal forming process that enables forming of complex three dimensional components by successive local deformations without using component specific tooling. ISMF is also regarded as die-less manufacturing process and in the absence of part-specific dies, geometric accuracy of formed components is inferior to that of their conventional counterparts. In Single Point Incremental Forming (SPIF), the simplest variant of ISMF, bending near component opening region is unavoidable due to lack of support. The bending in the component opening region can be reduced to a larger extent by another variant of ISMF namely Double Sided Incremental Forming (DSIF) in which a moving tool is used to support the sheet locally at the deformation zone. However the overall geometry of formed components still has unacceptable deviation from the desired geometry. Experimental observation and literature indicates that the supporting tool loses contact with the sheet after forming certain depth. Present work demonstrates a methodology to enhance geometric accuracy of formed components by compensating for tool and sheet deflection due to forming forces. Forming forces necessary to predict compensations are obtained using force equilibrium method along with thickness calculation methodology developed using overlap that occurs during forming (instead of using sine law). Results indicate that there is significant improvement in accuracy of the components produced using compensated tool paths.

CAM-Solution for Two Robots Based Incremental Sheet Metal Forming

2011 ◽  
Vol 473 ◽  
pp. 889-896 ◽  
Author(s):  
D. Kreimeier ◽  
J. Zhu ◽  
V. Smukala ◽  
B. Buff ◽  
C. Magnus
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Industrial Robots ◽  
Forming Process ◽  
Lateral Direction ◽  
Incremental Sheet Metal Forming ◽  
Supporting Tool ◽  
Tool Building

Robot based incremental sheet metal forming (Roboforming)is a new dieless forming process, which is suitable for cost-effective manufacture of prototype parts and small batch sizes.The principle of Roboforming is based on flexible shaping through a freely programmable path-synchronous movement of two industrial robots. These two robots, which are connected to a cooperating robot system, hold respectively a forming and a supporting tool. Similar to other incremental forming methods, the final shape is produced bythe movement of the forming toolalongthe lateral direction and its gradual infeed in the depth direction. In Roboforming, there are twodifferent strategies for the synchronous movement of the supporting tool, eitheralong the outer contour onbacksideof the sheet or directly opposed to the forming tool building a forming gap.The second strategy can be combined with a force controlled method to increase the surface quality and geometricaccuracy. MThe most existing CAM systems used in numerous incremental forming approaches are only applicable for milling machines. In this paper, with the use of self-programmed postprocessors and an Application Programming Interface (API) in a CAM system, movement programs for two cooperating robots can be generated for both forming strategies to produce sheet metal parts with different sizes and complex freeform structures. This CAM-solution for Roboforming is validated bythe forming experiments.

Fundamental Studies on Incremental Forming of Titanium Sheet-Metal

2006 ◽  
Author(s):  
G. Hussain ◽  
L. Gao
Keyword(s):  
Plane Strain ◽  
Sheet Metal ◽  
Strain Distribution ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Apex Angle ◽  
Forming Process ◽  
Titanium Sheet ◽  
Sheet Blank ◽  
Tool Diameter

Several aspects of Incremental Forming, an innovative sheet-metal-forming process, were studied. Firstly, an optimal combination of tool and lubricant was explored to form the TA1 (commercial Titanium) sheet-metal parts. Secondly, the effect of the tool diameter on the surface texture of a part was investigated. In addition to this, the influence of the tool diameter on in-plane strain distribution and thickness distribution along a part was also studied. Lastly, experiments were conducted in order to investigate the influence of half-apex angle on thickness distribution along a part to be formed. It has been concluded that the surface coating of sheet-blanks is essential to form the TA1 parts with good surface textures, and the dispersion of MoS2 powder in grease should be rubbed on the coated surface of the sheet-blank to provide lubrication between the tool tip (tip of a surface-hardened HSS tool) and the sheet-blank surface. Furthermore, the tool diameter has no effect on the texture of a formed surface, the deformation mode, and the in-plane strain distribution on a part. It has also been found that the tool diameter does not influence the thickness distribution along a part; rather this is governed by the Sine of half-apex angle of the part to be formed.

scholarly journals Design and manufacturing of a fixing device for incremental sheet forming process

2018 ◽  
Vol 178 ◽  
pp. 02004 ◽  
Author(s):  
Daniel Nasulea ◽  
Gheorghe Oancea
Keyword(s):  
Sheet Metal ◽  
Deep Drawing ◽  
Incremental Forming ◽  
Single Point ◽  
Fem Simulation ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Design And Manufacturing

In incremental sheet forming processes, the expensive dedicated tool are avoided and replaced with a cheap and simple fixing device which support the sheet metal blanks. The current paper presents how a fixing device used for single point incremental forming device is designed, FEM simulated and manufactured. The fixing device can be used for parts with a cone frustum and pyramidal frustum made of DC05 deep drawing steel. The forces developed in the process and the device displacements were estimated using FEM simulation. The device components were manufactured using a CNC machines and the physical assembly is also presented in the paper.

Comparison of incremental sheet metal forming process using newly designed multipoint tool with the existing single point tool by optimization and characterization methods on austenite stainless steel 202

2021 ◽  
pp. 095440542098609
Author(s):  
Ramkumar Kathalingam ◽  
Baskar Neelakandan ◽  
Elangovan Krishnan ◽  
Sathiya Narayanan Chinnayan ◽  
Selvarajan Arangulavan ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Research Work ◽  
Forming Process ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming

Incremental Sheet metal Forming (ISF) is a reliable process of converting a blank to work piece with better outputs compared to conventional forming process. The flexibility of ISF in producing the rapid prototype based on the customer needs is increased which is also desirable in the industry. But Single Point Incremental Forming (SPIF) process takes more time to form a product and hence the longer time is a barrier in implementing this process in industries. In this research work, the ISF process was made on sheet metal SS 202 using a newly designed multi-point tool and the obtained outputs were compared with the same material of sheet metal formed by traditionally available single point tool. This Multi Point Incremental Forming (MPIF) process takes lesser process time to give better formability, improved wall angle and good surface roughness. The input process parameters selected for the process are type of tool, speed, feed, Vertical Step Depth (VSD), and lubrication. They are arranged by using the taguchi Design of Experiments (DOE) approach. The responses considered are wall angle, formability, surface roughness, spring back and forming time. The multiple outputs obtained were optimized by Grey Relational Analysis (GRA) to predict the superior parameter. Confirmation test was also made to validate the output result. Fractography analysis was carried out to predict the fracture mechanism obtained during the forming process. The surface topography was also made on the surface of the formed area of the sheet metal. This research work concludes that newly designed MPIF outperforms SPIF.

Study of Sphere NC Sheet Metal Incremental Forming

2011 ◽  
Vol 239-242 ◽  
pp. 1036-1039
Author(s):  
Liu Ru Zhou
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Forming Process ◽  
Sheet Metal Incremental Forming ◽  
Incremental Sheet Metal Forming ◽  
Metal Forming Process ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of sphere forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to shear deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. According to sine law, a sphere can’t be formed by NC incremental sheet metal forming process in a single process, rather, it must be formed in multi processes. Thus, the two time path process method is presented to form the sphere, and the experiment is made to verify it. A sphere can be formed from a sheet metal in NC incremental forming process by choosing appropriate tool-path planning. The fracture in the forming component can be avoided by these methods. A sphere of uniform wall-thickness can be formed from the truncated cone by NC incremental forming process.

Study on Square Conical Box NC Sheet Meta Incremental Forming

2011 ◽  
Vol 308-310 ◽  
pp. 1012-1015
Author(s):  
Liu Ru Zhou
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Apex Angle ◽  
Forming Limit ◽  
Forming Process ◽  
Incremental Sheet Metal Forming ◽  
Planning Experiment

The principle of NC incremental sheet metal forming as well as the process planning, experiment of the square conical box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation and thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The sine law indicates that the thickness of the square conical box wall is close to zero when the half-apex angle of the square conical box wall is close to zero. Therefore, we must know the forming limit half-apex angle to ensure that the forming can be carried out successfully, i.e., to ensure that the deformed region with a certain thickness will not fracture. It will succeed in square conical box incremental forming in a single tool-path if the forming is carried out with an angle which is larger than the forming limit half-apex angle. The fracture in the forming component can be avoided by these methods. A square conical box of uniform wall-thickness can be formed by NC incremental forming process. The thickness of deformation area is increased by increasing half-apex angle. The wrinkle in the forming component can be avoided by these methods.

Sign in / Sign up

Export Citation Format

Share Document