scholarly journals Evaluation of Power System Reliability and Quality Levels for (N-2) Outage Contingency

2020 ◽  
Vol 10 (1) ◽  
pp. 5307-5316
Author(s):  
B. M. Alshammari
Keyword(s):  
Power Systems ◽  
Quality Assessment ◽  
System Reliability ◽  
Large Scale ◽  
Quality Indices ◽  
Contingency Analysis ◽  
Scale Reliability ◽  
Power Utilities ◽  
Assessment Problems ◽  
Adequate Power

One of the main objectives of electric power utilities keeping up a continuous and adequate power supply to the customers at a sensible cost. This paper contributes to the solution of the reliability and quality assessment problems in power systems, using the (N-2) outage contingency scenario to evaluate power system’s reliability and quality levels. Therefore, the methodology presented in this paper is based on the integration of reliability measures, quality indices, and contingency analysis. While reliability formulas have traditionally been applied to small and illustrative power systems, large-scale reliability and quality assessment go far beyond direct implementation of formulas. Systems with hundreds of buses and tens of complex stations can only be analyzed using advanced and numerically effective large-scale algorithms for reliability and quality assessment as demonstrated in this paper.

Pervasive Grid for Large-Scale Power Systems Contingency Analysis

2006 ◽  
Vol 2 (3) ◽  
pp. 165-175 ◽  
Author(s):  
Q. Morante ◽  
N. Ranaldo ◽  
A. Vaccaro ◽  
E. Zimeo
Keyword(s):  
Power Systems ◽  
Large Scale ◽  
Contingency Analysis

Overview of Subsynchronous Oscillation in Grid-connected Wind Farm

2020 ◽  
Vol 13 (7) ◽  
pp. 969-979
Author(s):  
Xu Pei-Zhen ◽  
Lu Yong-Geng ◽  
Cao Xi-Min
Keyword(s):  
Power Systems ◽  
Wind Turbine ◽  
Large Scale ◽  
Wind Farm ◽  
Wind Farms ◽  
Induction Generator ◽  
Future Research ◽  
Stable Operation ◽  
Subsynchronous Oscillation ◽  
Different Types

Background: Over the past few years, the subsynchronous oscillation (SSO) caused by the grid-connected wind farm had a bad influence on the stable operation of the system and has now become a bottleneck factor restricting the efficient utilization of wind power. How to mitigate and suppress the phenomenon of SSO of wind farms has become the focus of power system research. Methods: This paper first analyzes the SSO of different types of wind turbines, including squirrelcage induction generator based wind turbine (SCIG-WT), permanent magnet synchronous generator- based wind turbine (PMSG-WT), and doubly-fed induction generator based wind turbine (DFIG-WT). Then, the mechanisms of different types of SSO are proposed with the aim to better understand SSO in large-scale wind integrated power systems, and the main analytical methods suitable for studying the SSO of wind farms are summarized. Results: On the basis of results, using additional damping control suppression methods to solve SSO caused by the flexible power transmission devices and the wind turbine converter is recommended. Conclusion: The current development direction of the SSO of large-scale wind farm grid-connected systems is summarized and the current challenges and recommendations for future research and development are discussed.

scholarly journals Identification of Efficient Sampling Techniques for Probabilistic Voltage Stability Analysis of Renewable-Rich Power Systems

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2328
Author(s):  
Mohammed Alzubaidi ◽  
Kazi N. Hasan ◽  
Lasantha Meegahapola ◽  
Mir Toufikur Rahman
Keyword(s):  
Monte Carlo ◽  
Stability Analysis ◽  
Power Systems ◽  
Large Scale ◽  
Voltage Stability ◽  
Sampling Technique ◽  
Coefficient Of Determination ◽  
Sampling Techniques ◽  
Quasi Monte Carlo ◽  
Efficient Sampling

This paper presents a comparative analysis of six sampling techniques to identify an efficient and accurate sampling technique to be applied to probabilistic voltage stability assessment in large-scale power systems. In this study, six different sampling techniques are investigated and compared to each other in terms of their accuracy and efficiency, including Monte Carlo (MC), three versions of Quasi-Monte Carlo (QMC), i.e., Sobol, Halton, and Latin Hypercube, Markov Chain MC (MCMC), and importance sampling (IS) technique, to evaluate their suitability for application with probabilistic voltage stability analysis in large-scale uncertain power systems. The coefficient of determination (R2) and root mean square error (RMSE) are calculated to measure the accuracy and the efficiency of the sampling techniques compared to each other. All the six sampling techniques provide more than 99% accuracy by producing a large number of wind speed random samples (8760 samples). In terms of efficiency, on the other hand, the three versions of QMC are the most efficient sampling techniques, providing more than 96% accuracy with only a small number of generated samples (150 samples) compared to other techniques.

scholarly journals Wind power integration into the automatic generation control of power systems with large-scale wind power

2014 ◽  
Vol 2014 (10) ◽  
pp. 538-545 ◽  
Author(s):  
Abdul Basit ◽  
Anca Daniela Hansen ◽  
Mufit Altin ◽  
Poul Sørensen ◽  
Mette Gamst
Keyword(s):  
Power Systems ◽  
Wind Power ◽  
Large Scale ◽  
Automatic Generation ◽  
Automatic Generation Control ◽  
Wind Power Integration ◽  
Generation Control
Sign in / Sign up

Export Citation Format

Share Document