scholarly journals Biomechanical and Clinical Considerations in correcting Skeletal Class II Malocclusion with ForsusTM

2012 ◽  
Vol 13 (6) ◽  
pp. 918-924 ◽  
Author(s):  
P Sudhakar ◽  
Sunil Arora ◽  
Amit Maheshwari ◽  
D Praveen Kumar Varma ◽  
Sai Prakash Adusumilli ◽  
...  
Keyword(s):  
Case Report ◽  
Treatment Time ◽  
Clinical Manifestations ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Patient Cooperation ◽  
Clinical Considerations

ABSTRACT Aim The present case report describes the importance of understanding of biomechanical and clinical considerations in application of Forsus appliance in correction of class II skeletal malocclusion. Background Angle's class II malocclusion is one of the most prevailing that may be either skeletal or dental presenting with different clinical manifestations. There are number of appliances to treat such a malocclusion in a growing child. Fixed functional appliances are indicated for class II corrections in patients who report late with minimal residual growth left. Case description A case of class II skeletal and dental malocclusion treated with preadjusted edgewise appliance supplemented with Forsus Fatigue Resistant Device (FRD) (3M Unitek Corp, California, USA) is reported. Conclusion Forsus device is an effective alternative in treating moderate skeletal class II malocclusion. The Forsus FRD (3M Unitek Corp, California, USA) can be used instead of class II elastics in mild cases and in place of Herbst appliance in severe cases. Alteration of force vector by modifying the archwire as shown in this case report while applying Forsus and incorporation of 10 degree labial root torque in lower archwire will minimize the effects on dentition. Engaging modules or tubing on to the pushrod and leaving 1 to 2 mm clearance between distal end of the upper tube and L-pin as shown in this case report will significantly improve the patient compliance. Clinical significance Much emphasis should be given to biomechanical considerations which were discussed in this article while treating patients with Forsus to prevent the unwanted effects. Clinical considerations and certain modifications advised in this case report should be utilized while treating class II skeletal malocclusions with Forsus appliance to eliminate the patient cooperation factor and make treatment time estimates much more accurate. How to cite this article Adusumilli SP, Sudhakar P, Mummidi B, Varma DPK, Arora S, Radhika A, Maheshwari A. Biomechanical and Clinical Considerations in correcting Skeletal Class II Malocclusion with ForsusTM. J Contemp Dent Pract 2012; 13(6):918-924.

scholarly journals Orthodontic management of skeletal class II malocclusion with horizontally impacted maxillary canine: A case report

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Sanjay Prasad Gupta ◽  
Dr. Shristi Rauniyar
Keyword(s):  
Case Report ◽  
Treatment Plan ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Functional Appliance ◽  
Maxillary Canine ◽  
Twin Block ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii

Management of skeletal class II relation in growing patient require careful evaluation of growth status, proper diagnosis and treatment plan to address the patient’s need. Twin block is the appliance of choice among functional appliance to correct the skeletal class II malocclusion due to it’s acceptability by the patient and simplified design. Maxillary canine impaction is the second most prevalent impaction after the third molars. Treatment of maxillary canine impaction is usually a challenge to orthodontic approach as the defect lies in the esthetic region of the jaw. This case report describes the orthodontic management of a 9 years male patient having skeletal Class II malocclusion with horizontally impacted maxillary canine. Some modifications in the treatment mechanics are deemed essential to address the patient’s need for achieving the optimal esthetic and to improve the occlusion. Twin block is beneficial for the treatment of skeletal malocclusion in a growing patient to achieve the maximum benefit. The orientation of impacted teeth may change from horizontal to favorable one, hence it should be considered a viable treatment alternative. In such case, early diagnosis and interception at the right time along with radiographic follow-ups are necessary to achieve successful results. Keywords: Canine Impaction, Class II malocclusion, Growth modification, Twin block appliance

Abordagem precoce da má oclusão de Classe II esquelética com atresia maxilar e mordida aberta anterior e o uso de alinhadores ClearCorrect – relato de caso

2021 ◽  
Vol 14 (53) ◽  
pp. 97-106
Author(s):  
Roberto Hideo Shimizu ◽  
Isabela Almeida Shimizu ◽  
Ana Cláudia M. Melo Toyoffuku ◽  
Rebecca Marquesini ◽  
Tatiane Travizan Lima ◽  
...  
Keyword(s):  
Treatment Time ◽  
Low Complexity ◽  
Class Ii ◽  
Open Bite ◽  
Class Ii Malocclusion ◽  
Anterior Open Bite ◽  
Skeletal Class ◽  
Posterior Crossbite ◽  
Skeletal Class Ii ◽  
High Predictability

Adequate planning and early treatment of Angle Class II malocclusion with maxillary atresia and anterior open bite provides harmonization of maxillomandibular bone bases in the three planes of space. Orthodontic aligners have emerged as an alternative treatment having the following advantages: being more aesthetic and more comfortable for the patient, less treatment time when they are correctly indicated, less chairside time, less complications, possibility of remote monitoring, easier feeding, and dental hygiene. On the other hand, they offer difficulties to treat adults with severe skeletal Class II malocclusions, posterior crossbite and anterior open bite. Therefore, the objective of this clinical case report is to early correct skeletal Class II malocclusion with maxillary atresia through the use of mechanical orthopedics and devices that help eliminate habits and close the anterior open bite, and later the use of orthodontic aligners to finish the treatment. It was concluded that the early interceptive treatment of malocclusion was efficient to harmonize the bone bases in the anteroposterior, vertical, and transversal directions, changing this malocclusion from high to low complexity and, consequently, highly predictable and with an excellent prognosis for treatment with orthodontic aligners. The treatment with ClearCorrect aligners corrected the occlusion in a shorter period of time when compared to corrective orthodontics and with a high predictability in relation to the virtual setup.

scholarly journals Orthodontic Camouflage Treatment of Class II Malocclusion in Non-growing Patient - A Case Report

2015 ◽  
Vol 5 (1) ◽  
pp. 46-49 ◽  
Author(s):  
Lubna Khan ◽  
Hemant Kumar Halwai ◽  
Rajiv Yadav ◽  
Ourvind Jeet Singh Birring
Keyword(s):  
Case Report ◽  
Surgical Treatment ◽  
Asian Population ◽  
Class Ii ◽  
Adult Patients ◽  
Treatment Modalities ◽  
Class Ii Malocclusion ◽  
Facial Profile ◽  
Skeletal Class ◽  
Skeletal Class Ii

The prevalence of skeletal Class II malocclusion is high amongst Asian population. Various treatment modalities have been presented for the treatment of Class II malocclusions in adult patients. We come across many adult patients who desire a costeffective and non-surgical correction and they accept dental camouflage as a treatment option to mask skeletal discrepancy. This case report presents a 26-year-old non-growing female who had a skeletal Class II malocclusion with prognathic maxilla and retrognathic mandible with an overjet of 7 mm, severe crowding, but did not want surgical treatment. We considered the camouflage treatment by extracting upper first premolars. Following the treatment, a satisfactory result was achieved with an acceptable static and functional occlusion, facial profile, smile and lip competence with patient satisfaction.

scholarly journals Gummy smile and facial profile correction using miniscrew anchorage

2011 ◽  
Vol 82 (1) ◽  
pp. 170-177 ◽  
Author(s):  
Masato Kaku ◽  
Shunichi Kojima ◽  
Hiromi Sumi ◽  
Hiroyuki Koseki ◽  
Sara Abedini ◽  
...  
Keyword(s):  
Case Report ◽  
Surgical Therapy ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Facial Profile ◽  
Retention Period ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Profile Correction ◽  
Gummy Smile

Abstract This case report describes the treatment of a case involving a skeletal Class II facial profile with a gummy smile. While treating a facial profile and a gummy smile, the outcome may not always be successful with orthodontic therapy alone. For this reason, surgical therapy is often chosen to gain an esthetic facial profile and a good smile. However, sometimes the patients reject surgical treatment and an alternative method must be considered. Skeletal anchorage systems such as miniscrews are now frequently used for correcting severe malocclusion that should be treated by surgical therapy. In this case report, we treated a skeletal Class II malocclusion with a convex profile and a gummy smile using miniscrews, which were placed in the upper posterior and anterior areas. The active treatment period was 3.5 years, and the patient's teeth continued to be stable after a retention period of 36 months.

scholarly journals Effective and Efficient Correction of Severe Skeletal Class II Division 1 Malocclusion with Intermaxillary Elastics

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Mohammed K. Badri
Keyword(s):  
Class Ii ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Division 1 ◽  
The Status ◽  
Patient Cooperation ◽  
Growth Modification ◽  
Class Ii Elastics ◽  
Class Ii Division 1

Treatment of Class II malocclusion accompanied with a skeletal discrepancy is challenging. The approach of correction depends on several factors such as the status and pattern of growth, severity of the malocclusion, and patient cooperation. This case report describes a successful management of a 12-year-old young adolescent boy that was presented with a Class II division 1 malocclusion with an underlying skeletal discrepancy in horizontal and vertical dimensions. Growth modification was achieved by means of bite opening and unlocking the mandible together with Class II elastics and mechanics. Treatment was highly effective and efficient by achieving all treatment goals within a period of 18 months.

scholarly journals Management of a Skeletal Class II Malocclusion Using 2-Phase Treatment: An Indian Board of Orthodontics Case Report

2020 ◽  
Vol 54 (3) ◽  
pp. 240-247
Author(s):  
Snigdha Pattanaik
Keyword(s):  
Class Ii ◽  
Division I ◽  
Class Ii Malocclusion ◽  
Average Growth ◽  
Lower Lip ◽  
Skeletal Class ◽  
Skeletal Malocclusion ◽  
Skeletal Class Ii ◽  
Nasolabial Angle ◽  
Tongue Thrust

PK, a 12-year-old female patient, was diagnosed with skeletal Class II due to retrognathic mandible, average growth pattern, Angle’s Class II, Division I malocclusion with Class II canine relation, mild upper anterior spacing, upper anterior proclination, uprighted lower anterior, lingually tipped 35, increased overjet and overbite, scissor bite Irt 24, 25, acute nasolabial angle, tongue thrust habit, incompetent lips, and lower lip trap. The nonextraction approach to orthodontic treatment was involved. The skeletal malocclusion was corrected using the twin-block appliance, followed by upper and lower pre-adjusted edgewise appliances (0.022 × 0.028 slot) with the MBT prescription.

scholarly journals Management of Skeletal Class II Malocclusion in Non-Complaint Patient using Powerscope - A Case Report

2019 ◽  
Vol 9 (2) ◽  
pp. 77-81
Author(s):  
Akram Ansari ◽  
Abhay Kumar Jain ◽  
Ankit Singh ◽  
Priya Sharma ◽  
Muneeb Adil
Keyword(s):  
Case Report ◽  
Class Ii ◽  
Ease Of Use ◽  
Patient Comfort ◽  
Adolescent Male ◽  
Class Ii Malocclusion ◽  
Functional Appliance ◽  
Skeletal Class ◽  
Fixed Functional Appliance ◽  
Skeletal Class Ii

Class II malocclusion in pubertal phase presents a major and a common challenge to orthodontists. Proper diagnosis and treatment planning in early stage help in preventing and intercepting the severity of malocclusion. In pubertal phase skeletal Class II malocclusion due to mandibular retrusion are best treated with functional appliance. In recent time PowerScope fixed functional appliance is gaining immense popularity as noncompliant Class II corrector. In the present case report an adolescent male patient having Class II division 1 malocclusion with functional jaw retrusion was treated using MBT 0.022” prescription and PowerScope appliance. 7-8 months of PowerScope wear obtained stable and successful results with improvement in facial profile, skeletal jaw relationship and mild increase in IMPA. It can thus be concluded that PowerScope gives good results in Class II correction with a combination of patient comfort and ease of use that was unmatched among other appliances

Sign in / Sign up

Export Citation Format

Share Document