scholarly journals CALCULATION AND UPDATE OF A 3D BUILDING MODEL OF BAVARIA USING LIDAR, IMAGE MATCHING AND CATASTRE INFORMATION

2013 ◽  
Vol II-2/W1 ◽  
pp. 7-12 ◽  
Author(s):  
K. Aringer ◽  
R. Roschlaub
Keyword(s):  
Image Matching ◽  
Building Model ◽  
3D Building Model

scholarly journals AN INSPIRE-KONFORM 3D BUILDING MODEL OF BAVARIA USING CADASTRE INFORMATION, LIDAR AND IMAGE MATCHING

2016 ◽  
Vol XLI-B4 ◽  
pp. 747-754 ◽  
Author(s):  
R. Roschlaub ◽  
J. Batscheider
Keyword(s):  
Image Matching ◽  
High Speed ◽  
State Agency ◽  
Test Plan ◽  
Research Project ◽  
Data Set ◽  
Building Model ◽  
Building Models ◽  
Joint Research Project ◽  
3D Building Model

The federal governments of Germany endeavour to create a harmonized 3D building data set based on a common application schema (the AdV-CityGML-Profile). The Bavarian Agency for Digitisation, High-Speed Internet and Surveying has launched a statewide 3D Building Model with standardized roof shapes for all 8.1 million buildings in Bavaria. For the acquisition of the 3D Building Model LiDAR-data or data from Image Matching are used as basis in addition with the building ground plans of the official cadastral map. The data management of the 3D Building Model is carried out by a central database with the usage of a nationwide standardized CityGML-Profile of the AdV. The update of the 3D Building Model for new buildings is done by terrestrial building measurements within the maintenance process of the cadaster and from image matching. In a joint research project, the Bavarian State Agency for Surveying and Geoinformation and the TUM, Chair of Geoinformatics, transformed an AdV-CityGML-Profilebased test data set of Bavarian LoD2 building models into an INSPIRE-compliant schema. For the purpose of a transformation of such kind, the AdV provides a data specification, a test plan for 3D Building Models and a mapping table. The research project examined whether the transformation rules defined in the mapping table, were unambiguous and sufficient for implementing a transformation of LoD2 data based on the AdV-CityGML-Profile into the INSPIRE schema. The proof of concept was carried out by transforming production data of the Bavarian 3D Building Model in LoD2 into the INSPIRE BU schema. In order to assure the quality of the data to be transformed, the test specifications according to the test plan for 3D Building Models of the AdV were carried out. The AdV mapping table was checked for completeness and correctness and amendments were made accordingly.

scholarly journals AN INSPIRE-KONFORM 3D BUILDING MODEL OF BAVARIA USING CADASTRE INFORMATION, LIDAR AND IMAGE MATCHING

2016 ◽  
Vol XLI-B4 ◽  
pp. 747-754
Author(s):  
R. Roschlaub ◽  
J. Batscheider
Keyword(s):  
Image Matching ◽  
High Speed ◽  
State Agency ◽  
Test Plan ◽  
Research Project ◽  
Data Set ◽  
Building Model ◽  
Building Models ◽  
Joint Research Project ◽  
3D Building Model

The federal governments of Germany endeavour to create a harmonized 3D building data set based on a common application schema (the AdV-CityGML-Profile). The Bavarian Agency for Digitisation, High-Speed Internet and Surveying has launched a statewide 3D Building Model with standardized roof shapes for all 8.1 million buildings in Bavaria. For the acquisition of the 3D Building Model LiDAR-data or data from Image Matching are used as basis in addition with the building ground plans of the official cadastral map. The data management of the 3D Building Model is carried out by a central database with the usage of a nationwide standardized CityGML-Profile of the AdV. The update of the 3D Building Model for new buildings is done by terrestrial building measurements within the maintenance process of the cadaster and from image matching. In a joint research project, the Bavarian State Agency for Surveying and Geoinformation and the TUM, Chair of Geoinformatics, transformed an AdV-CityGML-Profilebased test data set of Bavarian LoD2 building models into an INSPIRE-compliant schema. For the purpose of a transformation of such kind, the AdV provides a data specification, a test plan for 3D Building Models and a mapping table. The research project examined whether the transformation rules defined in the mapping table, were unambiguous and sufficient for implementing a transformation of LoD2 data based on the AdV-CityGML-Profile into the INSPIRE schema. The proof of concept was carried out by transforming production data of the Bavarian 3D Building Model in LoD2 into the INSPIRE BU schema. In order to assure the quality of the data to be transformed, the test specifications according to the test plan for 3D Building Models of the AdV were carried out. The AdV mapping table was checked for completeness and correctness and amendments were made accordingly.

scholarly journals INVESTIGATING STANDARDIZED 3D INPUT DATA FOR SOLAR PHOTOVOLTAIC POTENTIALS IN THE NETHERLANDS

2020 ◽  
Vol XLIII-B4-2020 ◽  
pp. 639-646
Author(s):  
A. Y. Amiranti ◽  
M. N. Koeva ◽  
M. Kuffer ◽  
V. van Altena ◽  
M. Post
Keyword(s):  
The Netherlands ◽  
Data Model ◽  
Image Matching ◽  
Point Cloud ◽  
Input Data ◽  
Solar Photovoltaic ◽  
Building Model ◽  
Dense Image ◽  
3D Building Model ◽  
Processing Steps

Abstract. This paper presents our contribution to the development of a standardized 3D input data model for solar photovoltaic potential estimation. Presently, different input data and processing steps influence the calculation for estimating the potential of solar energy in the Netherlands. The variety in characteristics of input data and issues with temporal accuracy extracted from the national registers and databases makes it challenging to obtain a consistent and reliable result. To address this issue, we created a point cloud dataset that integrated from LiDAR point cloud and dense image matching which is complete, recent and positionally accurate. Furthermore, we made a 3D building model from the integrated point cloud and identified the effect of finer resolution in the photovoltaic potential analysis.

scholarly journals POST-EARTHQUAKE 3D BUILDING MODEL (LOD2) GENERATION FROM UAS IMAGERY: THE CASE OF VRISA TRADITIONAL SETTLEMENT, LESVOS, GREECE

2020 ◽  
Vol XLIV-4/W3-2020 ◽  
pp. 165-172
Author(s):  
K. Chaidas ◽  
G. Tataris ◽  
N. Soulakellis
Keyword(s):  
Laser Scanner ◽  
Building Model ◽  
Levels Of Detail ◽  
Building Models ◽  
Digital Elevation ◽  
3D Building Model ◽  
Modelling Techniques ◽  
Camera Position ◽  
Elevation Model ◽  
Comparison Of The Results

Abstract. In recent years 3D building modelling techniques are commonly used in various domains such as navigation, urban planning and disaster management, mostly confined to visualization purposes. The 3D building models are produced at various Levels of Detail (LOD) in the CityGML standard, that not only visualize complex urban environment but also allows queries and analysis. The aim of this paper is to present the methodology and the results of the comparison among two scenarios of LOD2 building models, which have been generated by the derivate UAS data acquired from two flight campaigns in different altitudes. The study was applied in Vrisa traditional settlement, Lesvos island, Greece, which was affected by a devastating earthquake of Mw = 6.3 on 12th June 2017. Specifically, the two scenarios were created by the results that were derived from two different flight campaigns which were: i) on 12th January 2020 with a flying altitude of 100 m and ii) on 4th February 2020 with a flying altitude of 40 m, both with a nadir camera position. The LOD2 buildings were generated in a part of Vrisa settlement consisted of 80 buildings using the footprints of the buildings, Digital Surface Models (DSMs), a Digital Elevation Model (DEM) and orthophoto maps of the area. Afterwards, a comparison was implemented between the LOD2 buildings of the two different scenarios, with their volumes and their heights. Subsequently, the heights of the LOD2 buildings were compared with the heights of the respective terrestrial laser scanner (TLS) models. Additionally, the roofs of the LOD2 buildings were evaluated through visual inspections. The results showed that the 65 of 80 LOD2 buildings were generated accurately in terms of their heights and roof types for the first scenario and 64 for the second respectively. Finally, the comparison of the results proved that the generation of post-earthquake LOD2 buildings can be achieved with the appropriate UAS data acquired at a flying altitude of 100 m and they are not affected significantly by a lower one altitude.

Sign in / Sign up

Export Citation Format

Share Document