Effects of Shear Tabs and High-Strength Bolts in Seismic Performance of Steel Moment Connections

A shear tab and high-strength bolts are often used to connect a steel H-beam to a column. The design demand and capacity of these elements vary from one standard to the other. To investigate the effect, this study applied a finite element method (FEM) to develop models for two steel moment connections and validated the effectiveness by test data. The connections were characteristic of bolted-web-and-welded-flange details. The FEM models were then used to study the design of shear tabs and high-strength bolts in accordance with the U.S. and Japan standards and compared to the Taiwan practice. The result showed a small difference in the peak loads of the connections. However, the U.S. direct welded flange connection had flange buckling and strength degradation at a relatively smaller drift. The connection had a thinner shear tab and fewer high-strength bolts. The other two connections had very similar design results and loading responses. The increase in shear-tab thickness reduced the stress concentration and fracture potential of the connections. It is, therefore, recommended to design a shear tab with moment capacity greater than the beam web. This will reduce the stress concentration of the base metal surrounding the beam-flange groove welds, increasing the connection ductility.

Shear tab connection with composite beam subjected to transient-state fire temperatures

Purpose This study aims to develop a rational model to predict the thermal axial forces developed in shear tab connections with composite beams when subjected to transient-state fire temperatures. Design/methodology/approach Finite element (FE) models are first developed in ABAQUS and validated against experimental data available in the literature. Second, a parametric study is conducted to identify the major parameters that affect the behavior of shear tab connections with composite beams in the fire. This includes beam length, shear tab thickness, shear tab location, concrete slab thickness, setback distance and partial composite action. A design-oriented model is developed to predict the thermal induced axial forces during the heating and cooling phases of a fire event. The model consists of multi-linear springs that can predict the stiffness and strength of each component of the connection with the composite beam. Findings The FE results show that significant thermal axial forces are generated in the composite beam in the fire. This is prominent when the beam bottom flange comes in contact with the column. Fracture at the toe of the welds governs the behavior during the cooling phase in most FE simulations. Also, the rational model is validated against the FE results and is capable of predicting the thermal axial forces developed in shear tab connections with composite beams under different geometrical properties. Originality/value The proposed model can predict the thermal axial force demand and can be used in performance-based approaches in future structural fire engineering applications.

Thermal creep of shear tab connection assemblies under transient-state temperatures of fire

Purpose This study aims to investigate the thermal creep behavior of steel frame assemblies with shear tab connections subjected to transient-state fire temperatures. Different key parameters are investigated to study their effect on the global response of the steel frames in fire. Design/methodology/approach Finite element (FE) models of connection assemblies are first analyzed using Abaqus under transient-state temperature conditions and validated against experimental work available in the literature. Upon acquiring the validated conditions, parametric studies are carried out to study the effect of key geometric and heating parameters on the overall response of the frame assembly to fire temperatures. Thermal creep material is also incorporated in the analyses through a user-defined subroutine, and a comparison between including and excluding creep material is illustrated to show the effect of thermal creep on the structural behavior. Findings The results reported herein indicate that having a rigid column increases the thermal-induced axial forces, thus increasing the development of thermal creep strains. Slow heating rates can cause axial stress relaxation in the restrained beam and increase the mid-span deflection and consequently the development of beam catenary action. The results also show that reaching higher initial cooling temperatures and having longer cooling phase durations result in more tensile forces at the end of the cooling phase. Originality/value Previous studies were limited to isolated steel connections under steady-state conditions. This study investigates the creep behavior of shear tab connection assemblies under transient-state conditions of fire when creep effects are explicitly considered. This can provide a rational and realistic assessment of the steel behavior in fire events.