Photocatalytic Hydrogen Evolution Coupled with Production of Highly Value‐Added Organic Chemicals by a Composite Photocatalyst CdIn2S4@MIL‐53‐SO3Ni1/2

Author(s):  
Chuan-De Wu ◽  
Huan-Huan Zhang ◽  
Guo-Peng Zhan ◽  
Zi-Kun Liu
Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 104
Author(s):  
Hongyu Ma ◽  
Yaqi Tan ◽  
Zhifei Liu ◽  
Jianhong Wei ◽  
Rui Xiong

Photocatalytic hydrogen evolution is a promising “green chemistry” route driven by sunlight for the direct water splitting into value-added hydrogen energy. Herein, with the object of exploring the effect of CuO loading on W18O49 photocatalytic activity, a 3D Urchin-like CuO modified W18O49 (CuO/W18O49) microspheres with different CuO loadings were synthesized via thermochemical precipitation combined with solvent-thermal method. The obtained CuO/W18O49 microspheres were analyzed by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL), etc. The results infer that the urchin-like 3D morphology with a high surface area and abundant 1D nanowires promotes electron transfer, the introduction of CuO further increases the number of active sites, thereby ensuring fast interfacial charge transfer to improve photocatalytic performance. During photocatalytic H2 evolution from water splitting, 5 wt.% CuO/W18O49 shows the optimal performance, the H2 yield is almost 3.22 times that of the undoped counterparts. This work presents that oxygen-vacancy-rich heterojunction nanocomposites can be used as a new strategy to design materials with high photocatalytic activity.


RSC Advances ◽  
2019 ◽  
Vol 9 (28) ◽  
pp. 15900-15909 ◽  
Author(s):  
Xia Li ◽  
Bo Wang ◽  
Xia Shu ◽  
Dongmei Wang ◽  
Guangqing Xu ◽  
...  

An MoSx/g-C3N4 composite photocatalyst was successfully fabricated by a sonochemical approach, where amorphous MoSx was synthesized using a hydrothermal method, and g-C3N4 nanosheets were produced using a two-step thermal polycondensation method.


2018 ◽  
Vol 54 (47) ◽  
pp. 5943-5955 ◽  
Author(s):  
Bo You ◽  
Guanqun Han ◽  
Yujie Sun

We have summarized the recent progress in electrocatalytic and photocatalytic water splitting integrated with organic oxidation for efficient H2 generation, which features no formation of explosive H2/O2 mixtures and reactive oxygen species, higher efficiency compared to conventional water splitting and potential co-production of value-added organic products.


2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.


ChemSusChem ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3605-3613 ◽  
Author(s):  
Qin Lei ◽  
Rongzhi Chen ◽  
Yurong Zhao ◽  
Huanyu Chen ◽  
Xinxin Long ◽  
...  

2021 ◽  
Author(s):  
Zhilu Du ◽  
Xinyu Zhao ◽  
Yingnan Zhao ◽  
Huiying Sun ◽  
Yingqi Li ◽  
...  

Copolymerization of urea and small molecules is an effective strategy to modify g-C3N4. To in-depth study the important effects of the introduction of small molecular moiety on the structure-property relationship...


Sign in / Sign up

Export Citation Format

Share Document