Negative Index Metamaterial Lens for the Scanning Angle Enhancement of Phased-Array Antennas

Author(s):  
Tai Lam ◽  
Claudio Parazzoli ◽  
Minas Tanielian
T-Comm ◽  
2021 ◽  
Vol 15 (8) ◽  
pp. 13-21
Author(s):  
Victor S. Aleshin ◽  

The basic principles of building a promising domestic regional satellite communication system “Express-RV”, based on the highly elliptical orbit “Molniya” and intended for broadband access of civil sector subscribers to various public communication networks, in particular to the Internet, are considered. The main technical requirements for the antenna systems of mobile mobile satellite communication terminals of the Express-RV system are formulated. The necessity of using active phased array antennas for a number of types of such terminals is justified. A brief overview of the principles of implementation and examples of the design of microstrip active phased array antennas, including their elementary emitters and individual modules, are given. The problem of the occurrence of the blinding effect inherent in flat microstrip gratings made on dielectric substrates is noted; measures to compen-sate for this effect are considered. The possibility of expanding the maximum scanning angle of a narrowly directed beam of an active phased array antenna by using a magnetically controlled scattering dielectric lens, as well as creating segment-dome structures of antenna systems in relation to mobile terminals of mobile satellite communications of the “Express-RV” system, is shown. Simple analytical relations are derived that allow us to estimate the number of elementary emitters required for the implementation of a receiving-transmitting active phased array antenna with specified technical characteristics: gain and maximum scanning angle; the corresponding dependencies are given. The cost of creating an antenna system based on an active phased array is estimated.


1987 ◽  
Author(s):  
M. G. Parent ◽  
L. Goldberg ◽  
P. D. Stilwell, Jr.

Author(s):  
Tarek Sallam ◽  
Ahmed M. Attiya

Abstract Achieving robust and fast two-dimensional adaptive beamforming of phased array antennas is a challenging problem due to its high-computational complexity. To address this problem, a deep-learning-based beamforming method is presented in this paper. In particular, the optimum weight vector is computed by modeling the problem as a convolutional neural network (CNN), which is trained with I/O pairs obtained from the optimum Wiener solution. In order to exhibit the robustness of the new technique, it is applied on an 8 × 8 phased array antenna and compared with a shallow (non-deep) neural network namely, radial basis function neural network. The results reveal that the CNN leads to nearly optimal Wiener weights even in the presence of array imperfections.


Author(s):  
Aparna B. Barbadekar ◽  
Pradeep M. Patil

Abstract The paper proposes a system consisting of novel programmable system on chip (PSoC)-controlled phase shifters which in turn guides the beam of an antenna array attached to it. Four antennae forming an array receive individual inputs from the programmable phase shifters (IC 2484). The input to the PSoC-based phase shifter is provided from an optimized 1:4 Wilkinson power divider. The antenna consists of an inverted L-shaped dipole on the front and two mirrored inverted L-shaped dipoles mounted on a rectangular conductive structure on the back which resonates in the ISM/Wi-Fi band (2.40–2.48 GHz). The power divider is designed to provide the feed to the phase shifter using a beamforming network while ensuring good isolation among the ports. The power divider has measured S11, S21, S31, S41, and S51 to be −14, −6.25, −6.31, −6.28, and −6.31 dB, respectively at a frequency of 2.45 GHz. The ingenious controller is designed in-house using a PSoC microcontroller to regulate the control voltage of individual phase shifter IC and generate progressive phase shifts. To validate the calibration of the in-house designed control circuit, the phased array is simulated using $s_p^2$ touchstone file of IC 2484. This designed control circuit exhibits low insertion loss close to −8.5 dB, voltage standing wave ratio of 1.58:1, and reflection coefficient (S11) is −14.36 dB at 2.45 GHz. Low insertion loss variations confirm that the phased-array antenna gives equal amplitude and phase. The beamforming radiation patterns for different scan angles (30, 60, and 90°) for experimental and simulated phased-array antenna are matched accurately showing the accuracy of the control circuit designed. The average experimental and simulated gain is 13.03 and 13.48 dBi respectively. The in-house designed controller overcomes the primary limitations associated with the present electromechanical phased array such as cost weight, size, power consumption, and complexity in design which limits the use of a phased array to military applications only. The current study with novel design and enhanced performance makes the system worthy of the practical use of phased-array antennas for common society at large.


Sign in / Sign up

Export Citation Format

Share Document