Modelling of damage and fracture processes of ceramic matrix composites under mechanical loading

2014 ◽  
pp. 151-178
Author(s):  
Tomasz Sadowski
Keyword(s):  
Mechanical Loading ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Damage And Fracture ◽  
Fracture Processes

scholarly journals Thermomechanical Characterization of SiC/SiC Ceramic Matrix Composites in a Combustion Facility

Ceramics ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 407-425 ◽  
Author(s):  
Ragav P. Panakarajupally ◽  
Michael J. Presby ◽  
K. Manigandan ◽  
Jianyu Zhou ◽  
George G. Chase ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Mechanical Loading ◽  
High Velocity ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Fatigue Loading ◽  
Matrix Composites ◽  
Front Side ◽  
Sic Ceramic ◽  
Combustion Environment

A combustion facility which includes uniaxial mechanical loading was implemented that enables environmental conditions more akin to jet engine environments compared to conventional static environment tests. Two types of woven SiC/SiC ceramic matrix composites (CMCs), melt-infiltrated (MI) and chemical vapor infiltrated (CVI), were subjected to fatigue loading in the combustion facility and under isothermal furnace conditions. Some CVI test coupons were coated with a multilayer environmental barrier coating (EBC) of mullite + ytterbium monosilicate using slurry infiltration process to demonstrate the performance with a coating. Combustion conditions were applied using a high velocity oxy fuel gun on the front side of the specimen and mechanical loading was applied using a horizontal hydraulic MTS machine. All the specimens considered were subjected to tension-tension fatigue loading at 100 MPa, stress ratio of 0.1 and specimen front-side surface temperature of 1200 ± 20 °C. Nondestructive evaluation (NDE) methods, such as electrical resistance (ER), was used as an in-situ health monitoring technique. Similar fatigue tests were performed in an isothermal furnace for comparison. A much lower fatigue life was observed for the uncoated specimens tested under combustion conditions in comparison to isothermal furnace condition. This difference in fatigue life was attributed to damage associated with added thermal stress due to the thermal gradient and higher rate of oxidative embrittlement due to the presence of high velocity combustion gases in the combustion environment. EBC coating increased the fatigue life in combustion environment. However, EBC coated specimens experienced spallation in the high-velocity flame due to the presence of micro cracks in the coating surface. Fracture surfaces of the failed specimens were investigated under the scanning electron microscope (SEM) to determine the extent of oxidation and damage.

Sign in / Sign up

Export Citation Format

Share Document