Ultrasonic speed as a function of formulation and technological factors of friction plastics

1971 ◽  
Vol 3 (5) ◽  
pp. 629-630
Author(s):  
V. A. Kuznetsov
2017 ◽  
Vol 2 (2) ◽  
pp. 65-74
Author(s):  
Roberto Cabardo ◽  
◽  
Jessica Avenido ◽  
Efren Barabat ◽  
◽  
...  

2020 ◽  
Vol 8 (14) ◽  
pp. 137-144
Author(s):  
Oksana Naumenko ◽  
◽  
Tetiana Polonska ◽  
Inna Hetman ◽  
Nataliia Bela ◽  
...  

2018 ◽  
pp. 54-55
Author(s):  
A.V. Begunova ◽  
◽  
I.V. Rozhkova ◽  
T.A. Raskoshnaya ◽  
T.I. Shyrshova ◽  
...  

The author presented experimental data on the influence of technological factors on the quality indexes of tablets based on a cryoliofilized salmonella bacteriophage. The analysis of the technological properties of model granules with such parameters as bulk density, flow ability, vibration compacting index, Hausner index, Сarr's index showed that the fractional composition of the granules should contain no more than 33 % of the pulverized fraction (0,25 mm or less). The granulate, regardless of its fractional composition, has elastic-plastic properties characterizing the strength of the tablets. The influence of the pressing pressure of the cryoliofilized composition tablets with salmonella bacteriophage on the crush strength and disintegration of enteric-soluble tablets was studied. The optimum compression pressure of tablets within 60 mPa of granules with a content of pulp fraction (0.25 mm or less) is not to be higher than 33 %.


2020 ◽  
Vol 1 (2) ◽  
pp. 14-18
Author(s):  
L.I. Kuznetsova ◽  
◽  
M.N. Kostyuchenko ◽  
O.A. Savkina ◽  
M.S. Burykina ◽  
...  

Author(s):  
Igor Chilin ◽  

Приведены результаты исследований и выполнена оценка влияния технологических факторов на реологические свойства самоуплотняющихся сталефибробетонных смесей, определены кратковременные и длительные физико-механические и деформативные характеристики сверхвысокопрочного сталефибробетона, включая определение его фактической морозостойкости.


Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Edgar V.M. Carrasco ◽  
Rejane C. Alves ◽  
Mônica A. Smits ◽  
Vinnicius D. Pizzol ◽  
Ana Lucia C. Oliveira ◽  
...  

Abstract The non-destructive wave propagation technique is used to estimate the wood’s modulus of elasticity. The propagation speed of ultrasonic waves is influenced by some factors, among them: the type of transducer used in the test, the form of coupling and the sensitivity of the transducers. The objective of the study was to evaluate the influence of the contact pressure of the transducers on the ultrasonic speed. Ninety-eight tests were carried out on specimens of the species Eucalyptus grandis, with dimensions of 120 × 120 × 50 mm. The calibration of the pressure exerted by the transducer was controlled by a pressure gauge using a previously calibrated load cell. The robust statistical analysis allowed to validate the experimental results and to obtain consistent conclusions. The results showed that the wave propagation speed is not influenced by the pressure exerted by the transducer.


Sign in / Sign up

Export Citation Format

Share Document