Investigation of stressed state of ribbed cylindrical shells with rectangular holes using the finite-element method

1974 ◽  
Vol 10 (10) ◽  
pp. 1056-1061
Author(s):  
M. I. Dlugach ◽  
N. V. Koval'chuk
1999 ◽  
Vol 21 (2) ◽  
pp. 116-128
Author(s):  
Pham Thi Toan

In the present paper, the goffered multilayered composite cylindrical shells is directly calculated by finite element method. Numerical results on displacements, internal forces and moments are obtained for various kinds of external loads and different boundary conditions.


2000 ◽  
Author(s):  
A. A. Lakis ◽  
A. Selmane ◽  
C. Dupuis

Abstract A theory is presented to predict the influence of non-linearities associated with the wall of the shell and with the fluid flow on the dynamic of elastic, thin, orthotropic open and closed cylindrical shells submerged and subjected to an internal and external fluid. The open shells are assumed to be freely simply-supported along their curved edges and to have arbitrary straight edge boundary conditions. The method developed is a hybrid of thin shell theory, fluid theory and the finite element method. The solution is divided into four parts. In part one, the displacement functions are obtained from Sanders’ linear shell theory and the mass and linear stiffness matrices for the empty shell are obtained by the finite element procedure. In part two, the modal coefficients derived from the Sanders-Koiter non-linear theory of thin shells are obtained for these displacement functions. Expressions for the second and third order non-linear stiffness matrices of the empty shell are then determined through the finite element method. In part three a fluid finite element is developed, the model requires the use of a linear operator for the velocity potential and a linear boundary condition of impermeability. With the non-linear dynamic pressure, we develop in the fourth part three non-linear matrices for the fluid. The non-linear equation of motion is then solved by the fourth-order Runge-Kutta numerical method. The linear and non-linear natural frequency variations are determined as a function of shell amplitudes for different cases.


1995 ◽  
Vol 117 (2) ◽  
pp. 213-219 ◽  
Author(s):  
T. C. Ramesh ◽  
N. Ganesan

Cylindrical shells with a constrained damping layer treatment are studied using three theories. The finite element method is made use of in the study. The nondimensional frequencies and loss factors predicted by the three theories are compared and the theories are evaluated. The importance of inclusion of the extensional effects in the core and its effect on the loss factor is brought out in this study.


Sign in / Sign up

Export Citation Format

Share Document