Volumetric error compensation model for five-axis machine tools considering effects of rotation tool center point

2019 ◽  
Vol 102 (9-12) ◽  
pp. 4371-4382 ◽  
Author(s):  
Sitong Xiang ◽  
Ming Deng ◽  
Huimin Li ◽  
Zhengchun Du ◽  
Jianguo Yang
Keyword(s):  
Error Compensation ◽  
Machine Tools ◽  
Volumetric Error ◽  
Compensation Model ◽  
Center Point ◽  
Effects Of Rotation ◽  
Five Axis

Volumetric error modeling and compensation considering thermal effect on five-axis machine tools

2012 ◽  
Vol 227 (5) ◽  
pp. 1102-1115 ◽  
Author(s):  
Yi Zhang ◽  
Jianguo Yang ◽  
Sitong Xiang ◽  
Huixiao Xiao
Keyword(s):  
Error Compensation ◽  
Machine Tools ◽  
Data Communication ◽  
Zero Point ◽  
Compensation System ◽  
Error Modeling ◽  
Volumetric Error ◽  
Position Errors ◽  
Homogeneous Transformation Matrix ◽  
Five Axis

This article intends to provide an error compensation system for five-axis machine tools. A volumetric error model is established with homogeneous transformation matrix method, from which compensation values of both orientation and position errors can be obtained. Thirty-seven errors on a five-axis machine tool are classified into three categories – functional, random, and negligible errors, among which the effect of the first one on volumetric accuracy is considered as great enough to be included in this model. Some typical modeling methods are discussed on positioning and straightness errors, considering both geometric and thermal effects. Then, we propose a compensation implementation technique based on the function of external machine zero point shift and Ethernet data communication protocol for machine tools. Finally, laser diagonal measurements have been conducted to validate the effectiveness of the proposed volumetric error compensation system.

A Low Cost and Efficient Volumetric-Error Measurement Method for Five-Axis Machine Tools

2013 ◽  
Vol 284-287 ◽  
pp. 1723-1728
Author(s):  
Shih Ming Wang ◽  
Han Jen Yu ◽  
Hung Wei Liao
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Machine Tools ◽  
Measurement Method ◽  
Low Cost ◽  
Machining Accuracy ◽  
Error Measurement ◽  
Volumetric Error ◽  
Volumetric Errors ◽  
Five Axis

Error compensation is an effective and inexpensive way that can further enhance the machining accuracy of a multi-axis machine tool. The volumetric error measurement method is an essential of the error compensation method. The measurement of volumetric errors of a 5-axis machine tool is very difficult to be conducted due to its complexity. In this study, a volumetric-error measurement method using telescoping ball-bar was developed for the three major types of 5-axis machines. With the use of the three derived error models and the two-step measurement procedures, the method can quickly determine the volumetric errors of the three types of 5-axis machine tools. Comparing to the measurement methods currently used in industry, the proposed method provides the advantages of low cost, easy setup, and high efficiency.

A Universal Postprocessor of General Table-Tilting Type of Five-Axis Machine Tools Without Rotational Tool Center Point Function for Actual NC Code Generation

2018 ◽  
Author(s):  
Guoqiang Fu ◽  
Hongli Gao ◽  
Tengda Gu
Keyword(s):  
Code Generation ◽  
Machine Tools ◽  
Kinematic Chain ◽  
Rotary Axes ◽  
Nc Code ◽  
Rotation Axes ◽  
Cutting Test ◽  
Center Point ◽  
Rtcp Function ◽  
Five Axis

The postprocessor is essential for machining with five-axis machine tools. This paper develops one universal postprocessor for table-tilting type of five-axis machine tools without rotational tool center point (RTCP) function. Firstly, positions of two rotary axes and the workpiece in the machine coordinate system (MCS) are introduced into the kinematic chain of the five-axis machine tools. The uniform product of exponential (POE) formula of the tool relative to the workpiece is established to obtain the universal forward kinematics. On this basis, the postprocessor of table-tilting type of five-axis machine tools is developed. The calculation of rotation angles of rotation axes is proposed in details, including the calculation of double solutions, the determination of rotation angles of C-axis and the selection principle of the shortest path of rotation angles. Movements of linear axes are calculated with rotation angles of rotary axes. The generated movements of all axes are actual positions of all axes relative to their zero positions, which can be used for machining directly. The postprocessor does not rely on RTCP function with positions of rotary axes and the workpiece in MCS. Finally, cutting test in VERICUT and real cutting experiments on SmartCNC500_DRTD five-axis machine tool are carried out to verify the effectiveness of the proposed postprocessor.

Table-Based Volumetric Error Compensation of Large Five-Axis Machine Tools

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Jennifer Creamer ◽  
Patrick M. Sammons ◽  
Douglas A. Bristow ◽  
Robert G. Landers ◽  
Philip L. Freeman ◽  
...  
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Machine Tools ◽  
Data Gathering ◽  
Measurement Data ◽  
Geometric Error ◽  
Compensation Method ◽  
Geometric Errors ◽  
Simultaneous Generation ◽  
Five Axis

This paper presents a geometric error compensation method for large five-axis machine tools. Compared to smaller machine tools, the longer axis travels and bigger structures of a large machine tool make them more susceptible to complicated, position-dependent geometric errors. The compensation method presented in this paper uses tool tip measurements recorded throughout the axis space to construct an explicit model of a machine tool's geometric errors from which a corresponding set of compensation tables are constructed. The measurements are taken using a laser tracker, permitting rapid error data gathering at most locations in the axis space. Two position-dependent geometric error models are considered in this paper. The first model utilizes a six degree-of-freedom kinematic error description at each axis. The second model is motivated by the structure of table compensation solutions and describes geometric errors as small perturbations to the axis commands. The parameters of both models are identified from the measurement data using a maximum likelihood estimator. Compensation tables are generated by projecting the error model onto the compensation space created by the compensation tables available in the machine tool controller. The first model provides a more intuitive accounting of simple geometric errors than the second; however, it also increases the complexity of projecting the errors onto compensation tables. Experimental results on a commercial five-axis machine tool are presented and analyzed. Despite significant differences in the machine tool error descriptions, both methods produce similar results, within the repeatability of the machine tool. Reasons for this result are discussed. Analysis of the models and compensation tables reveals significant complicated, and unexpected kinematic behavior in the experimental machine tool. A particular strength of the proposed methodology is the simultaneous generation of a complete set of compensation tables that accurately captures complicated kinematic errors independent of whether they arise from expected and unexpected sources.

Sign in / Sign up

Export Citation Format

Share Document