Effect of induced fracturing based on a natural fracture system in a dimension stone quarry in the Offerdal Nappe, Sweden

2000 ◽  
Vol 58 (3) ◽  
pp. 215-225 ◽  
Author(s):  
K.-J. Loorents ◽  
L. Björklund ◽  
J. Stigh
2021 ◽  
Vol 36 (1) ◽  
pp. 25-36
Author(s):  
Reza Mikaeil ◽  
Akbar Esmaeilzadeh ◽  
Sara Aghaei ◽  
Sina Shaffiee Haghshenas ◽  
Amir Jafarpour ◽  
...  

One of the most significant factors in the estimation of dimension stone quarry cost is the production rate of rock cutting machines. Evaluating the production rate of chain-saw machines is a very significant and practical issue. In this research, it has been attempted to evaluate and select the suitable working-face for a quarry by examining the maximum production rate in the Dehbid and Shayan marble quarries. For this purpose, fi eld studies were carried out which included measuring operational characteristics of the chain-saw cutting machine, the production rate and sampling for laboratory tests from seven active case studies. Subsequently, the physical and mechanical properties of rocks including: Uniaxial Compressive Strength (UCS), Brazilian Tensile Strength (BTS), Los Angeles abrasion, quartz content, water absorption percentage, porosity, Schmidt hardness and grain size for all sample measurements were studied after transferring the samples to a rock-mechanics laboratory. Finally, the sawability of the quarried working-faces was evaluated using the PROMETHEE multi-criteria decision-making (MCDM) model according to the physical and mechanical properties. The results of the study indicated that the number 1 and 5 working-faces from the Dehbid and Shayan quarries are the most suitable working-faces in terms of production rate with the maximum recorded production values (4.95 and 3.1 m2 /h), and with net fl ow rates (2.67 and -0.36) respectively.


2015 ◽  
Vol 8 (10) ◽  
pp. 8951-8961 ◽  
Author(s):  
Hakan Elçi ◽  
Necdet Türk ◽  
İsmail İşintek

2013 ◽  
Vol 765-767 ◽  
pp. 300-306
Author(s):  
Hui Zhang ◽  
Fang Jun Ou ◽  
Guo Qing Yin ◽  
Jing Bing Yi ◽  
Fang Yuan ◽  
...  

From the perspective of improving single well production and wellbore stability, stress field and natural fractures are the factors which have to be taken into account in the development of horizontal wells of the complex carbonate oil and gas fields in Kuqa piedmont and platform-basin transitional area. On the one hand, as the present stress field is the key factor to control fracture permeability, the trajectory of horizontal wells should pass through fracture system with good permeability as much as possible, being conducive to the effective stimulation of the reservoir. On the other hand, at the state of specific stress, the stability of well trajectory varies with directions. Therefore, before drilling horizontal wells, it is necessary to fully analyze the quantitative relationship between the present stress state and natural fracture occurrence and mechanical characteristics, etc., to optimize and determine a well trajectory conducive to high yield and wellbore stability. In this study, firstly, the fundamental principles for evaluating the present stress state and analyzing the relationship between the stress and fractures were described. Then based on the relationship between them, the occurrence and longitudinal positions of permeability fractures were analyzed. Apart from that, the stability index and fracture opening pressure distribution of wells in different directions at given stress state and fracture system were also analyzed. Finally, the optimization scheme for trajectory of horizontal wells under complex conditions was discussed with three aspects taken into account, i.e. best drilling in permeability fractures, wellbore stability and drilled reservoir stimulation.


2015 ◽  
Vol 4 (0) ◽  
pp. 27
Author(s):  
Afeni Thomas Busuyi ◽  
Moshood Onifade ◽  
Omotayo Bolaji Raphael

2013 ◽  
Vol 111 ◽  
pp. 71-77 ◽  
Author(s):  
Aditya Khanna ◽  
Alireza Keshavarz ◽  
Kate Mobbs ◽  
Michael Davis ◽  
Pavel Bedrikovetsky

2004 ◽  
pp. 663-670
Author(s):  
Stellin M ◽  
Hennies ◽  
A ◽  
H Lauand ◽  
Jr Stellin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document