Development of a Technology for a Hydraulic Radial Forging Machine at the Elektrostal Metallurgical Plant

This paper presents a new approach to precision cropping with radial forging, it skillfully utilizes the stress and strain concentration effect of the prefabricated V-shaped notch and the principle of the radial-forging machine to achieve the regular fracture of metal bar. The basic working principle of the new radial-forging cropping method is discussed in detail. Moreover, the distribution of the radial displacement loads is discussed in detail, and the loading rules are clearly explained under the conditions of the single cropping die, two cropping dies, three cropping dies and four cropping dies, as well as the radial-forging loading sequence. The model and equation of the movement with the radial-forging are established, the feasibility analysis of the radial-forging cropping method is carried out, which is in agreement with the experimental results.

Download Full-text

Studying the damage of ingots under plastic deformation on a lever-type radial forging machine

10.1063/1.4967031 ◽

2016 ◽

Cited By ~ 1

Author(s):

A. P. Karamyshev ◽

I. I. Nekrasov ◽

A. V. Nesterenko ◽

V. S. Parshin ◽

S. V. Smirnov ◽

...

Keyword(s):

Plastic Deformation ◽

Radial Forging ◽

Radial Forging Machine

Download Full-text

Using an AVS radial-forging machine to prepare the ends of tubes for drawing

Metallurgist ◽

10.1007/s11015-009-9084-9 ◽

2008 ◽

Vol 52 (9-10) ◽

pp. 498-500 ◽

Cited By ~ 1

Author(s):

A. P. Karamyshev ◽

I. I. Nekrasov ◽

V. S. Parshin ◽

V. A. Systerov

Keyword(s):

Radial Forging ◽

Radial Forging Machine

Download Full-text

Research on the Influence of Technological Forging Parameters on the Quality of Biphasic Titanium Alloys

High Temperature Materials and Processes ◽

10.1515/htmp-2014-0107 ◽

2015 ◽

Vol 34 (8) ◽

Author(s):

S. A. Mashekov ◽

N. T. Smaylova ◽

A. M. Alshynova ◽

A.S. Mashekova

Keyword(s):

Titanium Alloys ◽

Quantitative Data ◽

Strain State ◽

Radial Forging ◽

Optimum Size ◽

Stress Strain ◽

Rational Technology ◽

Deflected Mode ◽

Radial Forging Machine

AbstractThe deflected mode (DM) during the preparation of the broach in the flat and combined baizes and also on radial forging machine (RFM) was investigated for creating the rational technology of a broach and determining the optimum size of the angles of rotation and single squeeze reduction. The quantitative data was obtained by the method of final elements and the MSC.Super Forge program; the main consistent patterns of stress–strain state (SSS) distribution and temperature while modeling forging in flat and combined baizes, also on RFM with various angles of rotation and sizes of squeeze reduction were determined. The rational trial technology of forging of biphasic titanium alloys was developed and tested.

Download Full-text

Determination of the active forces in the reduction of semifinished products on an AVS radial forging machine

Metallurgist ◽

10.1007/s11015-009-9149-9 ◽

2009 ◽

Vol 53 (3-4) ◽

pp. 162-166 ◽

Cited By ~ 2

Author(s):

A. P. Karamyshev ◽

I. I. Nekrasov ◽

V. S. Parshin ◽

V. A. Systerov

Keyword(s):

Radial Forging ◽

Radial Forging Machine

Download Full-text

Pipes production by hot reducing at SKK-14 radial-forging machine

Ferrous Metallurgy Bulletin of Scientific Technical and Economic Information ◽

10.32339/0135-5910-2019-2-242-246 ◽

2019 ◽

Vol 75 (2) ◽

pp. 242-246

Author(s):

S. I. Zakarlyukin ◽

G. I. Koval’

Keyword(s):

Internal Surface ◽

Wall Thickening ◽

Outer Diameter ◽

Radial Forging ◽

Longitudinal Rolling ◽

Corrosion Resistant ◽

Rotary Forging ◽

Pilot Work ◽

Radial Forging Machine ◽

Small Capacity

At small-capacity production of pipes a process of pipes reducing at radial-forging machines can be effective for expanding of pipes assortment by diameter and wall thickness. Results of pilot work on hot reducing at radial-forging machine SKK14 of pipes, made of corrosion-resistant steels 12Х18Н10Т and 10Х23Н18. Based on analyses of known recommendations on pipes forming during reducing by longitudinal rolling at reducing mills, as well as at radial-forging and rotary-forging machines, it was recommended to use a known dependence Sр = S0/[1 – 0,0044(D0 – Dр)], usually applied for pipes rolling conditions at reducing mills, for predicting of reduced pipe wall thickening. To determine the pipes internal surface quality, a hot reducing of pipes made of 12Х18Н10Т steel was accomplished using different technological routes and taking into consideration a possibility of forming folds and laps on the surface. It was established that longitudinal folds (wrinkles) are not formed on the pipe internal surface at the pipe outer diameter decreasing by less than 30%, while the longitudinal folds (wrinkles) are formed at decreasing of the pipe outer diameter by more than 45%. Forging folds can be formed on the pipe internal surface at pipe outer diameter decreasing by more than 60%.

Download Full-text