scholarly journals A novel design of fast and compact all-optical full-adder using nonlinear resonant cavities

2021 ◽  
Vol 53 (5) ◽  
Author(s):  
Saleh Naghizade ◽  
Hamed Saghaei
2021 ◽  
Author(s):  
Saleh Naghizade ◽  
Hamed Saghaei

Abstract This paper proposes a new all-optical full-adder design based on nonlinear X-shaped photonic crystal (PhC) resonators. The PhC-based full-adder consists of three input ports, two X-shaped PhC resonators (X-PCRs), and two output ports. The dielectric rods made of silicon and nonlinear rods composed of doped glass are used to design the X-PCRs. Two well-known plane wave expansion and finite difference time domain methods are applied to study and analyze the photonic band structure and light propagation inside the PhC, respectively. Our numerical results demonstrate when the incoming light intensity increases, the nonlinear Kerr effect appears and manages the direction of light propagation inside the structure. The maximum time delay and footprint of the proposed full-adder are about 2.5ps and 663 μm2, making it an appropriate adder for high-speed data processing systems.


2021 ◽  
Author(s):  
Saleh Naghizade ◽  
Hamed Saghaei

Abstract In this paper, we report a new design of all-optical full-adder using two nonlinear resonators. The PhC-based full-adder consists of three input ports (A, B, and C for input bits), two nonlinear resonant cavities, several waveguides, and two output ports (for the Sum and Carry). Eight silicon rods and a nonlinear rod composed of doped glass form each resonant cavity. The well-known plane wave expansion technique is used to calculate the photonic band structure. It shows a wide photonic bandgap in the wavelength range of 1365 nm to 2074 nm covering the C and L optical transmission bands. The finite-difference time-domain method is applied to study the light propagation inside the full-adder. Our numerical results demonstrate when the incoming light intensity increases, the nonlinear optical Kerr effect appears and controls the direction of light emitted inside the structure as desired. The maximum time delay and footprint of the proposed full-adder are about 3ps and 758.5 µm2, respectively. Therefore, due to the low time delay and small footprint, the presented design can be used as a basic mathematical operator in the all-optical arithmetic logic unit.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sumit Chandra ◽  
Shahnaz Fatima ◽  
Raghuraj Singh Suryavanshi

AbstractIn the present scenario, data centers serve many functionalities like storage, transfer of data, supporting web applications, etc. In data centers, various levels of hierarchy different types of switches are required; therefore, multifunctional data centers are desired. This paper discusses a novel design for optical switch which can be placed at various levels of hierarchy. In the proposed design, multifunctionality contention resolution schemes which consider electronic and optical buffering and all-optical negative acknowledgment (AO-NACK) are considered. In buffering technologies, contending packets are stored in either in electronic RAM or in fiber delay lines. In case of the AO-NACK scheme, contending packets are blocked, and a negative acknowledgment is sent back to the transmitting node and blocked packets are retransmitted. For various considered schemes, Monte Carlo simulation have been performed, results in terms of packet loss probability are presented, and it has been found that the performance of optical buffering is much superior to electronic buffering and AO-NACK schemes. It is found that, in the AO-NACK scheme, the numbers of retransmitted packets due to contention blocking are 33,304 which can be reduced to 7, by using a small amount of buffer at each node.


2021 ◽  
Vol 397 (1) ◽  
pp. 2000341
Author(s):  
Anil Kumar Shukla ◽  
Girijesh Narayan Pandey

2007 ◽  
Author(s):  
Xiuying Fan ◽  
Guohui Lv ◽  
Zuohong Jiang ◽  
Huiying Wang ◽  
Youlong Yu

1987 ◽  
Vol 63 (6) ◽  
pp. 365-370 ◽  
Author(s):  
F.A.P. Tooley ◽  
N.C. Craft ◽  
S.D. Smith ◽  
B.S. Wherrett
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document